1036 Commits (6faa7020b28d848e566a918512e17da4435215a4)

Author	SHA1	Message	Date
libc0607	ae3e827016	Create fpv-bl-m8812eu2-wifi-adaptors.md (#348)	2024-04-10 12:11:31 +02:00
Viktor	61d7736d91	Update fpv-openipc-aio.md	2024-04-10 12:09:11 +02:00
viktorxda	f346ecc173	Add openipc aio content image (#350)	2024-04-10 12:00:47 +02:00
Viktor	e2d4fb655e	Merge openipc aio entries	2024-04-10 11:46:31 +02:00
Jonas Köritz	911f2cb256	Create device-aio-ultrasight.md (#349)	2024-04-10 11:44:44 +02:00
Viktor	93687d63b4	Update fpv-openipc-aio.md	2024-04-10 11:41:38 +02:00
Viktor	029288643b	Update images	2024-04-10 11:30:04 +02:00
Viktor	d46503803e	Add initial openipc aio page	2024-04-10 11:25:39 +02:00
viktorxda	eda0279889	Update faq.md	2024-04-01 21:32:29 +02:00
cronyx	3dfa989a62	Update tp-link.md	2024-04-01 21:28:48 +03:00
Lignium	59d05893aa	Add SJG_HI38_GW2M02_V1.3 board to gpio-settings.md (#346)	2024-03-31 09:04:25 +02:00
Konstantin Solovev	d29d699fda	Fill chip's details for TAPO C310 (#347)	2024-03-31 09:03:49 +02:00
viktorxda	5554cbfd6a	Update majestic-streamer.md	2024-03-25 04:47:30 +01:00
Viktor	374e0e26b2	Adjust links to the fpv guide	2024-03-25 04:28:52 +01:00
thegroove	6c6963e7dd	Changes for ssv6xxx (#345)	2024-03-24 01:34:58 +01:00
Signor Pellegrino	4df57f5d27	Create majestic-config.md	2024-03-21 21:32:15 +03:00
Igor Zalatov	996e8449f7	Remove unused file after merge	2024-03-20 18:13:51 +03:00
Signor Pellegrino	c3ab21afc7	Merge pull request #343 from Pun0110/IPG-G4-WR-BL ... Add some info about XM IPG-G4-WR-BL	2024-03-20 17:20:46 +03:00
Signor Pellegrino	19279ff9b2	Merge pull request #342 from csev1755/patch-1 ... Add notes for WYZEC2 in device-wyze-integration.md	2024-03-20 17:18:28 +03:00
Signor Pellegrino	b3e86f1200	Merge pull request #341 from OneManChop/Edits ... Source-code edits, merged building.md onto it	2024-03-20 17:11:57 +03:00
Pun0110	0aed16a5f9	Added Flash memory layout, minor fixes.	2024-03-20 11:18:47 +03:00
Pun0110	aab34538a1	another minor edits	2024-03-20 00:19:36 +03:00
Pun0110	d8839b294c	minor edits	2024-03-20 00:04:33 +03:00
Pun0110	70dfd07111	New files for IPG-G4-WR-BL	2024-03-19 23:01:46 +03:00
csev1755	c0539fa9be	Add notes for WYZEC2 in device-wyze-integration.md	2024-03-18 12:05:58 -05:00
Signor Pellegrino	536146eb0e	Merge pull request #339 from OwensDataCenter/patch-1 ... Fixed pin numbers for SSC335	2024-03-18 14:34:19 +03:00
OneManChop	15d474e5b1	Merge branch 'OpenIPC:master' into Edits	2024-03-18 11:34:11 +00:00
OneManChop	83623711b8	Update source-code.md ... removed statistical data	2024-03-18 11:33:58 +00:00
RoboSchmied	4bbc07fcdf	typo in [gpio-settings.md] (#340) ... fix typo	2024-03-16 21:41:45 +01:00
opshurst	0ae196288e	Fixed pin numbers for SSC335 ... Added the correct pin for the MC-F26/SSC335 IR Light GPIO.	2024-03-16 11:47:10 -04:00
Signor Pellegrino	bc237cbd52	Update fpv-mode-testing.md, fix typo	2024-03-15 00:43:28 +03:00
Signor Pellegrino	4a6f21e0fc	Create fpv-mode-testing.md	2024-03-15 00:26:26 +03:00
OneManChop	24dbd0ca30	Update source-code.md	2024-03-14 11:04:06 +00:00
OneManChop	8d0a61fc4f	Update source-code.md	2024-03-14 10:35:31 +00:00
OneManChop	65d4a2530a	source-code_&_Bulding.md ... merged source code and building pages cohesevly	2024-03-14 10:33:58 +00:00
Signor Pellegrino	1a524c6e9d	Merge pull request #338 from cat101/master ... Updated instruction for Smartwares CIP-37210	2024-03-12 00:37:13 +03:00
Signor Pellegrino	793f09e644	Merge pull request #337 from thegroove/network-perversions-2 ... Network trouble on hi35xx rewrite and consolidation	2024-03-12 00:36:51 +03:00
Signor Pellegrino	52db9f05dc	Update gpio-settings.md	2024-03-12 00:33:11 +03:00
cat101	d2c887ee59	Updated instruction for Smartwares CIP-37210 ... 1. Updated instructions to work with the newer releases of OpenIPC 2. Added GPIO settings to make it simpler for beginners	2024-03-09 19:51:51 -03:00
thegroove	b3a02a651b	Delete en/network-perversions.md	2024-03-07 04:12:46 +01:00
thegroove	e29d1e058f	Delete en/trouble-network.md	2024-03-07 04:12:10 +01:00
thegroove	e9837c612d	Create trouble-network-hi35xx.md	2024-03-07 04:09:32 +01:00
Petru Soroaga	b30b3318a1	Update building.md ... Minor updates	2024-03-01 15:56:43 +02:00
Petru Soroaga	9f9cb8a31c	Update building.md to add instructions for new packages ... How to add new packages to a particular project (board+firmware)	2024-02-28 08:01:03 +02:00
thegroove	23aa95876a	Update building.md ... ./building.sh -> make	2024-02-28 02:53:04 +01:00
Signor Pellegrino	28f1ed0f3c	Update show-changelog.md	2024-02-21 18:46:20 +03:00
JohhnGoblin	b9e8c9f34c	Update fpv-orange-pi-5-groundstation.md	2024-02-20 12:27:33 -05:00
JohhnGoblin	323e612a24	Update fpv-orange-pi-5-groundstation.md	2024-02-20 12:20:34 -05:00
HKR1987	e3f728eb64	Update fpv-from-buy-to-fly.md	2024-02-18 18:00:11 +01:00
HKR1987	d916e4497d	Update fpv-youtube.md	2024-02-18 18:00:04 +01:00
Chris Kuethe	4bd073b785	Add some names I found in the app/firmware for my camera	2024-02-17 11:36:02 -08:00
Chris Kuethe	69bafdd41a	factory firmware can help you pick the right drivers in a custom build	2024-02-17 11:11:15 -08:00
Signor Pellegrino	4fe3652e46	Merge pull request #328 from arvet333/patch-2 ... Update A-step-by-step-guide-for-an-FPV-setup.md	2024-02-16 22:30:45 +03:00
JohhnGoblin	c384a7eece	Update fpv-orange-pi-5-groundstation.md	2024-02-16 00:55:02 -05:00
arvet333	fae9cee46f	Update A-step-by-step-guide-for-an-FPV-setup.md ... Added information on how to enable 2nd UART	2024-02-15 12:56:27 +02:00
JohnDGodwin	1c7147179e	Rename fpv-orange-pi-5-groundstation.md to en/fpv-orange-pi-5-groundstation.md	2024-02-13 09:41:55 -05:00
Signor Pellegrino	770a73cdbe	Merge pull request #326 from RoboSchmied/patch-1 ... Update [firmware-sensor-install-sc223a.md]	2024-02-13 12:37:55 +03:00
RoboSchmied	ceb519a35b	Update [firmware-sensor-install-sc223a.md] ... clarification	2024-02-13 05:51:30 +01:00
RoboSchmied	3d18a7e840	Update guide-supported-sensors.md ... add sensors for goke boards	2024-02-13 05:23:38 +01:00
Signor Pellegrino	c36152303e	Update majestic-streamer.md, add motion enable scripts info	2024-02-12 10:38:58 +03:00
Signor Pellegrino	b1b6ae7e02	Rename roadmap.md to show-changelog.md	2024-02-11 15:50:32 +03:00
Signor Pellegrino	5bf95f53ea	Delete en/show-changelog.md	2024-02-11 15:49:15 +03:00
Signor Pellegrino	ea18db008e	Update roadmap.md	2024-02-11 15:47:27 +03:00
Signor Pellegrino	3766cccdc8	Update roadmap.md	2024-02-11 15:34:25 +03:00
Signor Pellegrino	1282d82b14	Create roadmap.md	2024-02-11 15:24:18 +03:00
Yuji Inoue	538b80522c	Update fpv-youtube.md	2024-02-11 01:13:28 +09:00
Signor Pellegrino	4c48205679	Update device-ms-j10_ms-j10B-pinout.md	2024-02-07 13:23:51 +03:00
Signor Pellegrino	376aacb55d	Rename IPC_PCB_pinout.jpg to board-anjoy-j10b-pinout.jpg	2024-02-07 13:22:01 +03:00
Signor Pellegrino	e285388910	Merge pull request #317 from sansarus/master ... ms-j10_ms-j10b pinout	2024-02-07 13:18:14 +03:00
Signor Pellegrino	5ee5dff8b7	Update burn-example.md	2024-02-07 13:02:07 +03:00
sansarus	dc60f0b634	Update device-ms-j10_ms-j10B-pinout.md ... add cpu temp	2024-02-07 12:30:13 +03:00
Signor Pellegrino	bd0be8bad7	Update majestic-streamer.md, add ONVIF note	2024-02-07 11:05:01 +03:00
sansarus	f799c05595	add gpio	2024-02-06 18:15:56 +03:00
sansarus	627048c70d	Create device-ms-j10_ms-j10B-pinout.md	2024-02-06 13:53:32 +03:00
sansarus	781a9747b4	Delete en/device-ms-j10_j10B-pinout	2024-02-06 13:20:07 +03:00
sansarus	8eb3171af6	Create device-ms-j10_j10B-pinout	2024-02-06 13:19:01 +03:00
sansarus	b61c63272e	Add files via upload	2024-02-06 13:03:03 +03:00
Signor Pellegrino	48bb7b2acc	Create sigmastar-research.md	2024-02-06 11:00:22 +03:00
Huang jinlong	1e02fed9b2	Update gpio-settings.md ... I'm very sorry, but I submitted it without a test before. Causes a display error.	2024-01-30 12:57:27 +08:00
Signor Pellegrino	5100eb0aaf	Merge pull request #312 from RoboSchmied/master ... add IQ (clean PR)	2024-01-30 00:09:26 +03:00
Huang jinlong	fadb52e7d1	Update gpio-settings.md ... Added audio output PIN of SSC338Q	2024-01-30 00:51:45 +08:00
Signor Pellegrino	fceeb80a3c	Merge pull request #314 from carbofos/patch-15 ... Update dev-nfs-boot.md	2024-01-29 01:08:04 +03:00
Signor Pellegrino	281341fcf8	Update gpio-settings.md, update IPC8232SWC-WE	2024-01-28 23:09:27 +03:00
Serhio	c9292494d6	Update dev-nfs-boot.md ... Link to Habr post	2024-01-28 13:00:03 +02:00
Signor Pellegrino	dd49e0e3f3	Merge pull request #313 from zizzer/master ... Update A-step-by-step-guide-for-an-FPV-setup.md	2024-01-28 01:41:48 +03:00
Signor Pellegrino	694a8a18c7	Update majestic-streamer.md, Update experimental control features	2024-01-27 22:54:13 +03:00
zizzer	d894ae5e9d	Update A-step-by-step-guide-for-an-FPV-setup.md ... Added link to a working firmware backup method for this camera.	2024-01-27 18:51:02 +00:00
Signor Pellegrino	25fbea3115	Update majestic-streamer.md	2024-01-27 20:06:50 +03:00
viktorxda	3a8a46357f	Update sigmastar-unbrick.md	2024-01-26 09:49:12 +01:00
Roboschmied	be5944e87c	add IQ	2024-01-26 06:04:17 +01:00
Signor Pellegrino	b8f3852de5	Update majestic-streamer.md, update options	2024-01-24 16:34:16 +03:00
Signor Pellegrino	b0c48b24f9	Update majestic-streamer.md, ad features	2024-01-24 14:19:57 +03:00
thegroove	2893b52a63	Update adding-wifi-driver.md (#309) ... No more building.sh	2024-01-24 03:37:16 +01:00
RoboSchmied	e794df084d	(re)start majestic on terminal (#308)	2024-01-23 16:30:54 +01:00
Petru Soroaga	f24670bdab	Update building.md (#307) ... Fix formatting	2024-01-22 17:46:49 +01:00
Signor Pellegrino	a90b1d7d20	Merge pull request #305 from PetruSoroaga/patch-5 ... Update building.md	2024-01-21 16:29:16 +03:00
Roboschmied	bff7f5eae0	add info where to find fps value ... change 25fps to new default value (30fps) for sc223a	2024-01-20 19:45:09 +01:00
Petru Soroaga	5ed8736ff0	Update building.md ... Add info on how to flash/install the build image.	2024-01-19 18:33:30 +02:00
Signor Pellegrino	b6f4e0c9b1	Merge pull request #303 from thegroove/add-your-wifi ... Adding a wifi driver to firmware	2024-01-19 15:18:37 +03:00
Roboschmied	2b65ef89cb	relative link + formatting	2024-01-18 22:25:53 +01:00
Roboschmied	0f6c5733b2	add link to sensor installation example	2024-01-18 22:25:42 +01:00
thegroove	ded27fd883	Merge branch 'OpenIPC:master' into add-your-wifi	2024-01-18 02:35:16 +01:00
thegroove	878e2e05f7	Update adding-wifi-driver.md	2024-01-18 02:32:00 +01:00
thegroove	9a034332a6	Update adding-wifi-driver.md	2024-01-18 02:30:46 +01:00
gtxaspec	0016217ff0	Update device-wyze-integration.md	2024-01-17 13:13:14 -08:00
thegroove	17a7190d67	Merge branch 'OpenIPC:master' into add-your-wifi	2024-01-17 21:03:50 +01:00
Signor Pellegrino	21f7a053b2	Merge pull request #300 from RoboSchmied/S ... Sensor driver installation example	2024-01-16 23:51:50 +03:00
Signor Pellegrino	d86ca6d82f	Merge pull request #302 from arvet333/patch-1 ... Update A-step-by-step-guide-for-an-FPV-setup.md	2024-01-16 23:49:52 +03:00
gtxaspec	0d08448361	Update ingenic-cloner-guide.md	2024-01-16 05:46:46 -08:00
arvet333	eed13ced3f	Update A-step-by-step-guide-for-an-FPV-setup.md ... fixed few mistakes (pinout images, command) added some additional information	2024-01-16 10:32:18 +02:00
RoboSchmied	819bb59db3	add sensor install example	2024-01-15 20:51:16 +01:00
RoboSchmied	e856504b8f	add sensor install example	2024-01-15 20:33:26 +01:00
RoboSchmied	242d0a7a4f	add sensor install example	2024-01-15 20:27:30 +01:00
thegroove	f78364bb52	Rename web-interface to web-interface.md	2024-01-14 13:23:55 +01:00
thegroove	a43a61c118	Delete en/microbe-web.md	2024-01-14 13:21:44 +01:00
thegroove	9c86e0d55b	Rebrand from microbe to web interface	2024-01-14 13:21:06 +01:00
gtxaspec	5714aef3a3	Update ingenic-cloner-guide.md	2024-01-13 18:39:16 -08:00
gtxaspec	2f140823fd	Update ingenic-cloner-guide.md	2024-01-12 21:55:58 -08:00
gtxaspec	b3ddbf356a	Update ingenic-cloner-guide.md	2024-01-12 20:54:20 -08:00
thegroove	96586c1da0	Update adding-wifi-driver.md	2024-01-09 21:56:44 +01:00
thegroove	230cd14b0d	Update adding-wifi-driver.md	2024-01-09 21:53:21 +01:00
CurryKitten	1d17879fc8	Correct error in USB wiring description ... I'd written the USB connections incorrectly, so people may have been trying to cross d_/d+ instead of joining them. Corrected this	2024-01-08 14:49:21 +00:00
gtxaspec	254bcbbe65	Update ingenic-cloner-guide.md	2024-01-07 21:01:45 -08:00
gtxaspec	5f4eb19bb4	Create ingenic-cloner-guide.md	2024-01-07 20:59:36 -08:00
Ystinia Zalatova	46b7bb2022	Merge pull request #296 from matteius/flash-programmer-guide ... Add initial draft of flash chip interfacing guide.	2024-01-08 03:32:10 +03:00
Matt Davis	45394e589a	Add more details of connecting to the chip.	2024-01-07 10:55:49 -05:00
Signor Pellegrino	6ff3d198ea	Merge pull request #295 from reav89/patch-1 ... Added T31L_F37_V1.1	2024-01-06 20:59:19 +03:00
Matt Davis	8c602e6a8f	Add initial draft of flash chip interfacing guide.	2024-01-05 23:09:54 -05:00
Igor Zalatov	dab6f54d1b	Moving YouTube links for OpenIPC FPV to a separate file	2024-01-05 23:55:05 +03:00
reav89	f554278439	Added T31L_F37_V1.1	2024-01-05 10:02:21 +01:00
Berobloom	a57734e46b	Update device-lsc-smart-connect-video-doorbell-2021.md ... - Fix hex for doorbell button - Add home assistant support	2024-01-01 16:56:45 +01:00
Signor Pellegrino	6777db9ebb	Merge pull request #291 from CurryKitten/master ... Create step-by-step FPV setup guide	2023-12-31 17:55:47 +03:00
CurryKitten	c437721092	Create a basic step-by-step guide for setting up a video link for FPV ... I've attempted to create a basic document to make things a little easier for new users. The idea is to take them through the flashing of the camera and ground station, setting up the wifi adapters, and configuring the software. This will get them to getting a basic video stream working. There's more to come when I document the rest of the FPV setup	2023-12-31 01:05:46 +00:00
Berobloom	b3e7e40033	Add device: LSC Smart Connect video doorbell 2021	2023-12-30 22:32:44 +01:00
thegroove	f875288b99	Create adding-wifi-driver.md	2023-12-30 00:59:26 +01:00
Signor Pellegrino	154973aeeb	Merge pull request #288 from thegroove/auto-night-mode ... Auto night mode	2023-12-29 20:59:31 +03:00
gtxaspec	a235ce3ade	Update device-wyze-integration.md ... update v3 gpio wifi	2023-12-27 21:14:42 -08:00
thegroove	a50e5c120b	Create auto-night-mode-without-light-sensor.md	2023-12-27 17:52:46 +01:00
Ystinia Zalatova	10c527ea0a	Update software-video-recording.md, update list ... Update and sync list	2023-12-24 20:59:09 +03:00
Signor Pellegrino	a4999bb081	Update faq.md	2023-12-24 00:14:49 +03:00
Paul Philippov	1f24986a8e	typos	2023-12-22 16:03:47 -05:00
Signor Pellegrino	841550fa2b	Merge pull request #284 from lucasdellasantina/master ... ADD pin out	2023-12-22 16:24:15 +03:00
gitgayhub	c90e066eae	Add homekit integration	2023-12-22 13:05:15 +00:00
Lucas Della Santina	7f54109d34	Merge branch 'OpenIPC:master' into master	2023-12-21 10:07:27 -03:00
gtxaspec	0838a723f9	Update device-wyze-integration.md	2023-12-21 00:44:44 -08:00
gtxaspec	a3e1432917	Update ingenic-t31-unbrick-with-sd-card.md	2023-12-21 00:24:28 -08:00
Lucas Della Santina	b07019e55c	Merge pull request #2 from OpenIPC/master ... Add example	2023-12-18 01:46:54 -03:00
gtxaspec	bea49c316f	Update ingenic-ptz.md	2023-12-17 20:44:36 -08:00
Lucas Della Santina	2fd257965a	add img	2023-12-18 01:43:44 -03:00
gtxaspec	bb1a2b74f0	Rename research-ingenic.md to ingenic-research.md	2023-12-17 20:39:47 -08:00
gtxaspec	e73fa350a7	Rename unbrick-ingenic-t31-with-sd-card.md to ingenic-t31-unbrick-with-sd-card.md	2023-12-17 20:39:18 -08:00
Lucas Della Santina	053c7d726b	Update serial_pins_uart.md	2023-12-18 01:35:27 -03:00
Lucas Della Santina	9648b6478a	Quick test	2023-12-18 01:32:49 -03:00
Lucas Della Santina	1ff47bd995	ADD Top View	2023-12-18 01:28:50 -03:00
Lucas Della Santina	b6a259317d	Update serial_pins_uart.md	2023-12-18 00:55:18 -03:00
Lucas Della Santina	1964b241c9	ADD pin out of T31 chip	2023-12-18 00:49:12 -03:00
gtxaspec	56d9c249e8	Update ingenic-ptz.md	2023-12-14 09:48:52 -08:00
Signor Pellegrino	8be6272590	Update majestic-streamer.md, add control signals	2023-12-14 15:48:00 +03:00
gtxaspec	ac294949f0	Update ingenic-ptz.md	2023-12-13 22:55:25 -08:00
HKR1987	5941e875fe	Update fpv-from-buy-to-fly.md	2023-12-12 13:24:18 +01:00
HKR1987	6b552fc0f7	Update fpv-from-buy-to-fly.md	2023-12-12 13:21:19 +01:00
HKR1987	a331231949	Update fpv-from-buy-to-fly.md	2023-12-12 13:12:07 +01:00
Signor Pellegrino	5c29b882ea	Merge pull request #280 from HKR1987/master ... Add steps from buy to fly (FPV)	2023-12-12 14:29:07 +03:00
HKR1987	38d78bf4cc	Update fpv-from-buy-to-fly.md	2023-12-12 11:35:53 +01:00
HKR1987	c95e5994da	Update fpv-from-buy-to-fly.md	2023-12-12 11:31:01 +01:00
HKR1987	3089a3e34f	Update fpv-from-buy-to-fly.md	2023-12-12 11:10:59 +01:00
HKR1987	48d52b733d	Update fpv-from-buy-to-fly.md	2023-12-12 11:09:14 +01:00
HKR1987	05ed6a578b	Create fpv-from-buy-to-fly.md	2023-12-12 11:05:14 +01:00
HKR1987	abe46810c7	Update fpv.md ... Add new youtube link (HKR)	2023-12-12 07:14:08 +01:00
GitNiKO	dc96744034	Update fpv.md ... Доб. видео от NiKO	2023-12-10 16:46:41 +03:00
cronyx	45210a91ca	Update gpio-settings.md	2023-12-09 23:46:10 +03:00
cronyx	0926c8de63	Update gpio-settings.md	2023-12-09 16:01:27 +03:00
cronyx	3632983bdf	Update gpio-settings.md	2023-12-09 16:00:44 +03:00
cronyx	e9b057b81b	Update gpio-settings.md	2023-12-09 15:50:15 +03:00
Signor Pellegrino	71eaf5e39d	Update fpv.md	2023-12-08 23:39:44 +03:00
Signor Pellegrino	8f12513e7f	Create fpv-qa.md	2023-12-07 18:15:29 +03:00
Paul Philippov	2626cf257a	Another model of T10 with different GPIO pins	2023-12-07 06:48:39 -05:00
Igor Zalatov	326d09a763	Remove personal note file	2023-12-06 19:06:02 +03:00
Signor Pellegrino	7e214005ca	Update fpv.md, add more video from YouTube	2023-12-06 18:38:50 +03:00
Igor Zalatov	a1bd8eb298	Update tp-link.md, add Tapo C110 info	2023-12-06 18:13:32 +03:00
cronyx	7d4cbbfc00	Update gpio-settings.md	2023-12-04 18:30:28 +03:00
cronyx	fbd0b2e2f5	Update gpio-settings.md	2023-12-04 18:29:31 +03:00
cronyx	d46c7933b1	Update gpio-settings.md	2023-12-04 18:25:04 +03:00
gtxaspec	aa312fd9ab	Update device-wyze-integration.md	2023-12-03 10:08:58 -08:00
gtxaspec	252b6bf96d	Update device-wyze-integration.md	2023-12-03 09:57:32 -08:00
gtxaspec	0b25f35850	Update device-wyze-integration.md ... update pan v1 info	2023-12-03 09:56:30 -08:00
Signor Pellegrino	8b46c71c3f	Update u-boot-settings.md	2023-12-03 13:06:27 +03:00
gtxaspec	d98db3aec0	Update ingenic-ptz.md	2023-12-02 12:44:48 -08:00
gtxaspec	334a983cbd	Update ingenic-ptz.md	2023-12-02 12:44:02 -08:00
gtxaspec	e5b0d278e8	Update ingenic-ptz.md	2023-12-02 12:41:27 -08:00
gtxaspec	396f89baa2	Create ingenic-ptz.md	2023-12-02 12:39:35 -08:00
Signor Pellegrino	8fd58c3273	Update u-boot-settings.md	2023-12-02 21:34:50 +03:00
gtxaspec	5654c62125	Update device-wyze-integration.md ... update panv2 IRCUT gpio	2023-12-01 22:29:47 -08:00
sanjy666	07b39b329b	Update gpio-settings.md ... Rostelecom IPC8232SWC-WE-B pins	2023-12-02 01:35:56 +05:00
gtxaspec	e9cea93d85	Update research-ingenic.md ... add imp-control	2023-11-28 11:00:20 -08:00
cronyx	c9f098fbc1	Update tp-link.md	2023-11-25 22:05:15 +03:00
Paul Philippov	31a4acb859	Update research-security.md	2023-11-25 13:10:49 -05:00
Signor Pellegrino	c983a301b5	Update fpv.md	2023-11-23 21:02:00 +03:00
Fobaz Dekanser	14f9df5fbe	Update fpv-gs-ubuntu.md ... typo	2023-11-22 21:32:43 +00:00
Signor Pellegrino	92d02230be	Merge branch 'master' into patch-4	2023-11-23 00:20:37 +03:00