add sensor install example

README.md

@@ -31,7 +31,7 @@ OpenIPC Wiki
 - [Network perversions](en/network-perversions.md)
 - [System features](en/system-features.md)
 - [Majestic streamer](en/majestic-streamer.md)
-- [Microbe web interface](en/microbe-web.md)
+- [Web interface](en/web-interface.md)
 - [Upgrade firmware](en/sysupgrade.md)
 - [Image quality tuning](en/image-quality-tuning.md)
 - [Memory tuning](en/memory-tuning.md)

en/firmware-sensor-install-sc223a.md

@@ -0,0 +1,28 @@
+# OpenIPC Wiki
+[Table of Content](../README.md)
+
+Install Image Sensors
+-----------------------
+
+If your image sensor driver is not included in the firmware image, you can install it manually.
+You need a sensor library and one sensor configuration file.
+You can find the files for your sensor following [this list](https://github.com/OpenIPC/wiki/blob/master/en/firmware-sensors.md).
+
+As an example the image sensor "sc223a" will be installed to a gk7205v210 board ( with openipc-gk7205v210-fpv-8mb.bin flashed).
+Install the files by downloading them directly from github to your device:
+```
+curl -s -L -o /usr/lib/sensors/libsns_sc223a.so https://github.com/OpenIPC/firmware/raw/master/general/package/goke-osdrv-gk7205v200/files/sensor/libsns_sc223a.so
+curl -s -L -o /etc/sensors/sc223a_i2c_1080p.ini https://github.com/OpenIPC/firmware/raw/master/general/package/goke-osdrv-gk7205v200/files/sensor/config/sc223a_i2c_1080p.ini
+```
+
+Adjust the fps value in /etc/majestic.yaml according to your sensor specs:
+
+```
+cli -s .video0.fps 25
+```
+
+Restart streamer:
+
+```
+killall -1 majestic
+```

en/web-interface.md

@@ -1,7 +1,7 @@
 # OpenIPC Wiki
 [Table of Content](../README.md)
 
-Microbe web interface
+Web interface
 ---------------------
 
 Web Interface is available on port 85 as _http://camera-ip:85_.