wiki/en/device-lifesmart-ls179.md

OpenIPC Wiki

Table of Content

For LifeSmart cameras: LS179

BOM

SoC: HI3518EV200
Flash: ENQH127A (16MB NOR)
Sensor: soif23 (???)

Installation

Follow the instructions to get access to U-boot.

Back up the flash and install OpenIPC according to the instructions.

Select a 16MB NOR flash, and use the Ultimate firmware if you want to use WiFi.

WiFi

In order to connect to WiFi, you need to configure the wireless device with rtl8188fu-hi3518ev200-lifesmart

fw_setenv wlandev rtl8188fu-hi3518ev200-lifesmart
# also configure your WiFi
fw_setenv wlanssid "MySSID"
fw_setenv wlanpass "password"
# and then...
reboot

This will power up the USB WiFi module (GPO #54), and load the appropriate Kernel driver (8188fu).

LEDs

The LEDs are controlled by the GPO #2.

# turn on
gpio set 2

# turn off
gpio clear 2