OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity
wiki/en/device-wyze-integration.md

273 lines
11 KiB
Markdown
Raw Blame History

# OpenIPC Wiki
[Table of Content](../README.md)
Wyze integration
----------------
This is where we'll be writing down our guide to flashing new devices and reports on our experiments.
### Current issues
* Exposure does not work well https://github.com/OpenIPC/majestic/issues/102
* ~~SD card does not work in the U-Boot (power is available)~~ fixed
* ~~Problem with loading u-boot from an microSD card. It doesn't reach the promt. Not only on wyze v3 (https://t.me/openipc_modding/179369), but also on another board T31L (https://t.me/openipc/47739). Most likely it will be IMPOSSIBLE, because in the camera there is a microSD power management MOSFET, which must be turned on BEFORE booting from the card (the experiment with not fully loaded u-boot was possible due to direct power supply to the microSD card, bypassing the transistor). Please confirm my version if it is not possible otherwise.~~ impossible without modification (direct 3.3V power supply to the microSD card reader)
### Known camera modifications
* WYZE Cam v3 and WYZE Cam Pan v3
| MODEL | IC | FCC ID | PCB VER | SoC | WIFI | NOTES |
|------------|------------------|------------------|---------------------------------|----------|-----------------------|----------------------------------------------------------------------------------|
| WYZEC3 | 25466-WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V1.2_20200715 | T31X | SDIO: Realtek 8189FTV | MAC: 7C:78:B2:99:6E:BA https://youtu.be/jm4wze_HY78 |
| WYZEC3 | 25466-WYZEC3 | 2AUIUWYZEC3 | WYZEV3_T31GC2053 V1.4_20201010 | T31ZX | SDIO: Realtek 8189FTV | MAC: 7C:78:B2:69:95:C9 https://t.me/openipc/49957 https://youtu.be/t7Nzo-KXTH0 |
| WYZEC3 | 25466-WYZEC3B | 2AUIUWYZEC3B | WYZEV3_T31GC2053 V2.02_20210523 | T31ZX | SDIO: Realtek 8189FTV | MAC: D0:3F:27:46:A7:7B https://t.me/openipc/38728 https://t.me/openipc/38753 |
| WYZEC3 | 25466-WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V2.02_20210523 | T31ZX | SDIO: AltoBeam 6031 | https://t.me/openipc/49049 https://t.me/openipc/49050 |
| WYZEC3 | 25466-WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V2.03_20211206 | T31X | SDIO: AltoBeam 6031 | https://t.me/openipc/45444 https://t.me/openipc/48942 |
| WYZEC3 | 25466-WYZEC3F | 2AUIUWYZEC3F | WYZEV3_T31AGC2053 V3.2_20210714 | T31A BGA | SDIO: AltoBeam 6031 | https://t.me/openipc/43299 https://t.me/openipc/38755 https://t.me/openipc/38757 |
| WYZEC3 | 25466-WYZEC3F | 2AUIUWYZEC3F | WYZEV3_T31AGC2053 V3.2_20210714 | T31A BGA | SDIO: AltoBeam 6031 | MAC: D0:3F:27:4F:23:19 https://youtu.be/VkqX9yg0odU |
| WYZECPAN3 | 25466-WYZECPAN3 | 2AUIUWYZECPAN3 | WYZE PAN V3 MB V1.3 | T31X | SDIO: AltoBeam 6031 | MAC: D0:3F:27:9C:0D:E7 https://youtu.be/hXTbDsnN9IY |
### OpenIPC installation
* Disassemble camera and connect UART adapter or your camera should be already connected to network.
* Backup
Downgrade original firmware version to (Jun 2021 w-o internet)demo_wcv3_4.36.2.5.bin
[(WYom20200 Jun 2021 w-o internet)demo_wcv3_4.36.2.5.bin.zip](https://github.com/OpenIPC/wiki/files/10755387/WYom20200.Jun.2021.w-o.internet.demo_wcv3_4.36.2.5.bin.zip)
Login with user `root` password `WYom20200` via telnet or UART console.
Insert microSD card to camera and issue command:
`for mtd in $(ls /dev/mtdblock*); do dd if=${mtd} of=/media/mmc/${mtd##/*/}.bin; done`
Output sample:
```
[root@WCV3:~]# for mtd in $(ls /dev/mtdblock*); do dd if=${mtd} of=/media/mmc/${mtd##/*/}.bin; done
512+0 records in
512+0 records out
262144 bytes (256.0KB) copied, 0.122976 seconds, 2.0MB/s
3968+0 records in
3968+0 records out
2031616 bytes (1.9MB) copied, 0.975797 seconds, 2.0MB/s
7808+0 records in
7808+0 records out
3997696 bytes (3.8MB) copied, 1.955184 seconds, 1.9MB/s
7808+0 records in
7808+0 records out
3997696 bytes (3.8MB) copied, 2.808704 seconds, 1.4MB/s
3968+0 records in
3968+0 records out
2031616 bytes (1.9MB) copied, 0.972091 seconds, 2.0MB/s
7808+0 records in
7808+0 records out
3997696 bytes (3.8MB) copied, 2.299745 seconds, 1.7MB/s
768+0 records in
768+0 records out
393216 bytes (384.0KB) copied, 0.186963 seconds, 2.0MB/s
128+0 records in
128+0 records out
65536 bytes (64.0KB) copied, 0.027560 seconds, 2.3MB/s
```
If there wasn't errors, then you backed up such partitions:
```
[root@WCV3:~]# cat /proc/mtd
dev: size erasesize name
mtd0: 00040000 00008000 "boot"
mtd1: 001f0000 00008000 "kernel"
mtd2: 003d0000 00008000 "rootfs"
mtd3: 003d0000 00008000 "app"
mtd4: 001f0000 00008000 "kback"
mtd5: 003d0000 00008000 "aback"
mtd6: 00060000 00008000 "cfg"
mtd7: 00010000 00008000 "para"
```
Check if files on microSD card with command `ls -la /media/mmc/`
```
[root@WCV3:~]# ls -la /media/mmc/
drwxr-xr-x 7 root root 8192 May 14 01:52 .
drwxrwxrwt 3 root root 60 May 14 01:50 ..
-rwxr-xr-x 1 root root 262144 May 14 01:52 mtdblock0.bin
-rwxr-xr-x 1 root root 2031616 May 14 01:52 mtdblock1.bin
-rwxr-xr-x 1 root root 3997696 May 14 01:52 mtdblock2.bin
-rwxr-xr-x 1 root root 3997696 May 14 01:52 mtdblock3.bin
-rwxr-xr-x 1 root root 2031616 May 14 01:52 mtdblock4.bin
-rwxr-xr-x 1 root root 3997696 May 14 01:52 mtdblock5.bin
-rwxr-xr-x 1 root root 393216 May 14 01:52 mtdblock6.bin
-rwxr-xr-x 1 root root 65536 May 14 01:52 mtdblock7.bin
```
Save and keep this files in safe place.
In case of any errors you should perform this operation once again, probably with microSD card replacement.
* Determine SoC model
Download `ipctool-mips32` to microSD card (https://github.com/OpenIPC/ipctool/releases/download/latest/ipctool-mips32) and insert microSD card in camera.
Login to camera and issue command `/media/mmc/ipctool-mips32`
There should be something like `model: T31ZX` in console output. Important part is `ZX`
Output sample:
```
[root@WCV3:~]# /media/mmc/ipctool-mips32
---
chip:
vendor: Ingenic
model: T31ZX
rom:
- type: nor
block: 32K
partitions:
- name: boot
size: 0x40000
sha1: 20776e92
- name: kernel
size: 0x1f0000
sha1: 6887b828
- name: rootfs
size: 0x3d0000
sha1: d368892a
- name: app
size: 0x3d0000
path: /system,squashfs
sha1: 04b813a8
- name: kback
size: 0x1f0000
sha1: 83ccf23a
- name: aback
size: 0x3d0000
sha1: 48bbe705
- name: cfg
size: 0x60000
path: /configs,jffs2,rw
- name: para
size: 0x10000
sha1: 472a55b0
size: 16M
ram:
total: 128M
media: 32M
firmware:
kernel: "3.10.14__isvp_swan_1.0__ (PREEMPT Wed Apr 14 17:44:51 CST 2021)"
toolchain: gcc version 4.7.2 (Ingenic r2.3.3 2016.12)
libc: uClibc 0.9.33.2
main-app: /system/bin/iCamera
```
* Flash OpenIPC U-boot
Open https://openipc.org/cameras/vendors/ingenic and choose appropriate SoC model from list.
In this case our choice Ingenic T31X.
In Downloads section find `OpenIPC Bootloader for Ingenic T31X` and download it.
https://github.com/OpenIPC/firmware/releases/download/latest/u-boot-t31x-universal.bin
Copy `u-boot-t31x-universal.bin` to microSD card and insert microSD card in camera.
`telnet` would be unavailable after the command below (`flashcp`) !
Login to camera and issue command:
`flashcp -v /media/mmc/u-boot-t31x-universal.bin /dev/mtd0`
Output sample:
```
[root@WCV3:~]# flashcp -v /media/mmc/u-boot-t31x-universal.bin /dev/mtd0
Erasing block: 8/8 (100%)
Writing kb: 242/242 (100%)
Verifying kb: 242/242 (100%)
```
Now your camera flashed with OpenIPC U-boot, but whole system is still stock.
So, next re/boot will load OpenIPC U-boot only (in cycling mode, until stop with `Ctrl+C` in UART console).
* Flash kernel and rootfs
Since we identified our chip as Ingenic T31X open https://openipc.org/cameras/vendors/ingenic and choose T31X.
In Downloads section find `OpenIPC Linux (Lite) for Ingenic T31X` and download it.
https://github.com/OpenIPC/firmware/releases/download/latest/openipc.t31-nor-lite.tgz
Power off the camera.
Extract and copy `rootfs.squashfs.t31` `uImage.t31` to microSD card. Insert microSD card in camera.
Power on the camera.
During power on the camera press `Ctrl+C` several times until it shows OpenIPC prompt like this `OpenIPC #`
Then issue command `run setnor16m`
After you press the Enter key the camera will almost immediately restart and you will have to catch the prompt again.
Then issue command:
```bash
mw.b ${baseaddr} ff 1000000; fatload mmc 0:1 ${baseaddr} uImage.${soc} ; sf probe 0; sf erase 0x50000 0x300000; sf write ${baseaddr} 0x50000 ${filesize}
```
and next:
```bash
mw.b ${baseaddr} ff 1000000; fatload mmc 0:1 ${baseaddr} rootfs.squashfs.${soc} ; sf probe 0; sf erase 0x350000 0xa00000; sf write ${baseaddr} 0x350000 ${filesize}
```
Output sample:
```shell
OpenIPC # mw.b ${baseaddr} ff 1000000; fatload mmc 0:1 ${baseaddr} uImage.${soc} ; sf probe 0; sf erase 0x50000 0x300000; sf write ${baseaddr} 0x50000 ${filesize}
reading uImage.t31
1855437 bytes read in 89 ms (19.9 MiB/s)
the manufacturer 5e
SF: Detected ZB25VQ128
--->probe spend 5 ms
SF: 3145728 bytes @ 0x50000 Erased: OK
--->erase spend 9871 ms
SF: 1855437 bytes @ 0x50000 Written: OK
--->write spend 3286 ms
OpenIPC # mw.b ${baseaddr} ff 1000000; fatload mmc 0:1 ${baseaddr} rootfs.squashfs.${soc} ; sf probe 0; sf erase 0x350000 0xa00000; sf write ${baseaddr} 0x350000 ${filesize}
reading rootfs.squashfs.t31
5079040 bytes read in 236 ms (20.5 MiB/s)
the manufacturer 5e
SF: Detected ZB25VQ128
--->probe spend 4 ms
SF: 10485760 bytes @ 0x350000 Erased: OK
--->erase spend 31730 ms
SF: 5079040 bytes @ 0x350000 Written: OK
--->write spend 8949 ms
```
If everything went well, issue the command `reset` and camera should start boot OpenIPC.
```console
Welcome to OpenIPC
openipc-t31 login: root
/###### /###### /####### /######
/##__ ## |_ ##_/ | ##__ ## /##__ ##
| ## \ ## /###### /###### /####### | ## | ## \ ## | ## \__/
| ## | ## /##__ ## /##__ ## | ##__ ## | ## | #######/ | ##
| ## | ## | ## \ ## | ######## | ## \ ## | ## | ##____/ | ##
| ## | ## | ## | ## | ##_____/ | ## | ## | ## | ## | ## ##
| ######/ | #######/ | ####### | ## | ## /###### | ## | ######/
\______/ | ##____/ \_______/ |__/ |__/ |______/ |__/ \______/
| ##
| ## build
|__/ master+98e3bca7, 2023-02-11
Please help the OpenIPC Project to cover the cost of development and
long-term maintenance of what we believe is going to become a stable,
flexible Open IP Network Camera Framework for users worldwide.
Your contributions could help us to advance the development and keep
you updated on improvements and new features more regularly.
Please visit https://openipc.org/sponsor/ to learn more. Thank you.
root@openipc-t31:~#
```
View Git Blame Copy Permalink