OpenIPC Wiki

OpenIPC AIO "Mario"

LED function Red glimmering Power on with Battery

Red Wired linked

Blue flash RF transmitter

Green TBD

Board Size 3032mm with 4M2 mount holes.

Heat Sink with 20mmx20mm mount holes.

Power Section 2S-6S

enter uboot use uart device connect to top of AIO board(R0,T0)pad.

connect usb debug port:

power on AIO with Battery connector(GH1.25* 6 pin), after the blue LED flashing, plug in usb cable and connect to PC

in windows:

go to control panel- internet -network:

find a usb2.0 to fast Ethernet Adapter

set this card ipv4 address to 192.168.1.11 mask:255.255.255.0

apply

then open ssh to connect AIO address:192.168.1.10

user:root password:12345

RF section

Default Antenna is ANT1 for 1T1R, ANT0+ANT1 is 2T2R

Reconmand RF setting

RF Power 1~30dbm

MCS index 1,3(0-7 is 1T1R, 8+ is 2T2R)

stbc=1,ldpc=1

Video biterate:4096 /12688(mcs 3+)

SD solt for Air camera record

on bench test or debug is disable the record function defaultly

To enable the recording function set (record value)true in majestic.yaml