mirror of https://github.com/OpenIPC/wiki.git
63 lines
2.7 KiB
Markdown
63 lines
2.7 KiB
Markdown
# OpenIPC Wiki
|
||
[Table of Content](../README.md)
|
||
|
||
Selecting hardware to complete OpenIPC FPV kits
|
||
-----------------------------------------------
|
||
|
||
<p align="center">
|
||
<img src="https://github.com/OpenIPC/wiki/blob/master/images/fpv-logo.jpg?raw=true" alt="Logo"/>
|
||
</p>
|
||
|
||
|
||
### Upgrade HI3536 NVR board to OpenIPC FPV firmware
|
||
|
||
- download actual [firmware](https://github.com/OpenIPC/firmware/releases/download/latest/openipc.hi3536dv100-nor-fpv.tgz) from OpenIPC site
|
||
- unpack firmware archive to your TFTP server
|
||
- connect UART adapter to NVR board
|
||
- go to u-boot (press Ctrl+C)
|
||
- execute a set of commands each line separately, changing the ip address of the nvr board and the ip address of your tftp server
|
||
|
||
```
|
||
setenv ipaddr 192.168.0.222
|
||
setenv serverip 192.168.0.8
|
||
setenv netmask 255.255.255.0
|
||
setenv bootcmd 'sf probe 0; sf read 0x82000000 0x50000 0x300000; bootm 0x82000000'
|
||
setenv uk 'mw.b 0x82000000 ff 1000000; tftp 0x82000000 uImage.${soc}; sf probe 0; sf erase 0x50000 0x300000; sf write 0x82000000 0x50000 ${filesize}'
|
||
setenv ur 'mw.b 0x82000000 ff 1000000; tftp 0x82000000 rootfs.squashfs.${soc}; sf probe 0; sf erase 0x350000 0x800000; sf write 0x82000000 0x350000 ${filesize}'
|
||
setenv bootargs 'mem=192M console=ttyAMA0,115200 panic=20 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:256k(boot),64k(env),3072k(kernel),10240k(rootfs),-(rootfs_data)'
|
||
setenv osmem '192M'
|
||
setenv totalmem '256M'
|
||
setenv soc 'hi3536dv100'
|
||
setenv da; setenv du; setenv dr; setenv dw; setenv dl; setenv dc; setenv up; setenv tk; setenv dd; setenv de; setenv jpeg_addr
|
||
setenv jpeg_size; setenv vobuf; setenv loadlogo; setenv appVideoStandard; setenv appSystemLanguage; setenv appCloudExAbility
|
||
saveenv
|
||
|
||
run uk
|
||
run ur
|
||
|
||
reset
|
||
```
|
||
|
||
### Alternative variant not ready yet !
|
||
|
||
Guideline flash Hi3536DV100 NVR board from original to OpenIPC FPV firmware
|
||
|
||
- Install [PUTTY](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html) and [TFTP](https://pjo2.github.io/tftpd64/) server
|
||
- Download actual [image](https://openipc.org/cameras/vendors/hisilicon/socs/hi3536dv100/download_full_image?flash_size=16&flash_type=nor&fw_release=fpv) for NVR from OpenIPC site
|
||
- Upload this image to your TFTP server
|
||
- Turn off NVR power, connect USB adapter to your NVR UART, specify which COM port on your PC
|
||
- Go to U-Boot with quick press Ctrl+C at power on
|
||
- Execute a set of commands each line separately
|
||
|
||
```
|
||
# Сhanging the ip address of the NVR board and the ip address of your TFTP server
|
||
setenv ipaddr 192.168.1.10; setenv serverip 192.168.1.254
|
||
mw.b 0x82000000 0xff 0x1000000
|
||
tftp 0x82000000 openipc-hi3536dv100-fpv-16mb.bin
|
||
sf probe 0; sf lock 0;
|
||
sf erase 0x0 0x1000000; sf write 0x82000000 0x0 0x1000000
|
||
reset
|
||
```
|
||
|
||
|