mirror of https://github.com/OpenIPC/wiki.git
777 lines
26 KiB
Markdown
777 lines
26 KiB
Markdown
Introduction
|
|
------------
|
|
|
|
This page describes OpenWRT-based firmware variant.
|
|
|
|
|
|
### Firmware features
|
|
|
|
* RTSP, ONVIF, NETIP
|
|
* Native ipeye service support
|
|
* Support squashfs, jffs2, overlayfs, vfat
|
|
* Vlan and bridges support
|
|
* Standard OPKG package system
|
|
* Tiny SNMP daemon
|
|
* Curl with SSL for upload/download files
|
|
* Run arbitrary command from u-boot ENV (linux_cmd=)
|
|
* Simple L2/L3 VPN with traffic shaping and compression (vtun)
|
|
* Simply sender Telegram bot (estgb)
|
|
* Low cost 3G USB modems support in hilink and ppp modes
|
|
* µVPN tunnel service
|
|
* and more ...
|
|
|
|
|
|
### Supported devices
|
|
|
|
We aim to develop **universal**, portable firmware supporting wide range of
|
|
manufacturers and delivering updates and fixes which vendors oftentimes
|
|
unable to deliver.
|
|
|
|
The list is constantly updated, please visit often and/or follow our Telegram
|
|
groups for new release notifications.
|
|
|
|
|
|
#### OpenIPC 1.0 (OpenWRT based)
|
|
|
|
| Processor | Sensor | Vendor | SKU | Board | Status |
|
|
|-------------|-----------------|------------|--------------|---------------------------------|--------|
|
|
| Hi3516Cv100 | IMX222_spi_dc | XM | | [BLK18C-0222-38X38_S-V1.03][1] | test |
|
|
| Hi3518Ev100 | OV9712_i2c_dc | CamHi/Xin | | IPC18E_9712_V2.0/V3.1 | test |
|
|
| | | | | | |
|
|
| Hi3516Cv200 | IMX323_i2c_dc | XM | | BLK16CV-0323-38X38-V1.01 | yes |
|
|
| Hi3516Cv200 | IMX323_i2c_dc | JVT | S323H16VF | IPS323-H16V-38X38-V2 | yes |
|
|
| Hi3516Cv200 | IMX323_i2c_mipi | XM | | | ? |
|
|
| Hi3518Ev200 | AR0130_i2c_dc | XM | | BLK18EV-0732-0035-38X38-V1.01 | yes |
|
|
| Hi3518Ev200 | JXF22_i2c_dc | XM | | BLK18EV-0002-2035-38X38-V1.01 | yes |
|
|
| Hi3518Ev200 | JXF22_i2c_dc | XM | | BLK18EV-0022-0130-38X38-V1.01 | yes |
|
|
| Hi3518Ev200 | OV2735_i2c_dc | Dahua | DH-IPC-C22P | E305654 JX02 94V-0 | wip |
|
|
| Hi3518Ev200 | OV9732_ | XM | | BLK18EV-0732-0035-38X38-V1.01 | yes |
|
|
| Hi3518Ev200 | OV9732_i2c_dc | Longse/HS | LS-IP100/40 | 3518EV200-OV9732-V1.0 | yes |
|
|
| Hi3518Ev200 | OV9732_i2c_dc | Rostelecom | QVC-IPC-136W | E305654 JX02 94V-0 | wip |
|
|
| Hi3518Ev200 | SC2135_i2c_dc | XM | | BLK18EV-0035-0042-38X38_S-V1.01 | yes |
|
|
| Hi3518Ev200 | SC2235_i2c_dc | XM | | BLK18EV-0235-38X38-B-V1.01 | yes |
|
|
| | | | | | |
|
|
| Hi3516Cv300 | AR0237_i2c_dc | XM | | BLK16CV3-0237P-38X38-S-V1.01 | yes |
|
|
| Hi3516Cv300 | IMX307_i2c_lvds | Raysharp | | RS-CM-188D 2018-03-16 E150111 | yes |
|
|
| Hi3516Cv300 | IMX323_i2c_dc | Longse/HS | | HI3516CV300-IMX323-POE-TF V1.1 | yes |
|
|
| Hi3516Cv300 | IMX323_i2c_dc | Sunywo | ZB6323 | IPG5020A-T-N6-V0.1 | yes |
|
|
| Hi3516Cv300 | IMX323_i2c_dc | XM | | [IVG-HP201Y-AE][2] | yes |
|
|
| Hi3516Cv300 | IMX291_i2c_lvds | XM | | [IVG-HP203Y-AE][3] | yes |
|
|
| Hi3516Cv300 | IMX323_spi_dc | JVT | S323H16XF | IPS323-H16X-38X38-V2/V3 | yes |
|
|
| Hi3516Cv300 | JXF22_i2c_dc | XM | | BLK16CV3-0022-38X38-S-V1.01 | yes |
|
|
| Hi3516Ev100 | IMX323_i2c_dc | XM | | BLK16E-0323-38X38-B-V1.01 | yes |
|
|
| Hi3516Ev100 | SC2235P_i2c_dc | XM | 80HE20PS-S | BLK16E-0235-38X38-S-V2.03 | yes |
|
|
|
|
|
|
#### OpenIPC 2.1 (Buildroot based)
|
|
|
|
| Processor | Sensor | Vendor | SKU | Board | Status |
|
|
|-------------|------------------|--------|-----|----------------------|--------|
|
|
| Hi3516Ev200 | IMX307_i2c_mipi | XM | | [IVG-85HF20PY-S][4] | yes |
|
|
| Hi3516Ev200 | SC4239P_i2c_mipi | XM | | [IVG-85HF30PS-S][5] | yes |
|
|
| Hi3516Ev300 | IMX335_i2c_mipi | XM | | [IVG-85HG50PYA-S][6] | yes |
|
|
| SSC335 | SC3335 | | | [Uniview][7] | yes |
|
|
|
|
More information about sensors: [https://cctvsp.ru][8] (translated from Russian
|
|
with Google Translate).
|
|
|
|
|
|
### Web interface
|
|
|
|
* <http://192.168.1.10/> - Standard system interface based on OpenWrt Luci
|
|
|
|
|
|
### Majestic streamer
|
|
|
|
Majestic is a video streaming application, the heart of our firmware (in
|
|
relation to camera/video surveillance functionality). It's configurable via
|
|
file `/etc/majestic.yaml` and by default has many features/services enabled.
|
|
Unneeded options can be turned off for better security and performance.
|
|
|
|
To run `majestic` in debug mode:
|
|
|
|
```
|
|
killall -sigint majestic; export SENSOR=$(ipctool --sensor_id); majestic
|
|
```
|
|
|
|
To run `majestic` in production mode restart the camera or run command:
|
|
|
|
```
|
|
killall -sigint majestic; export SENSOR=$(ipctool --sensor_id); majestic 2>&1 | logger -p daemon.info -t majestic &
|
|
```
|
|
|
|
|
|
### Camera related URLs in firmware
|
|
|
|
Information on streamer URLs and their description can be found in the [Wiki][9].
|
|
|
|
|
|
### Statistical data
|
|
|
|
Software might do product usage data collection including SoC and sensor model
|
|
name to gather statistics used in QA process.
|
|
|
|
We guaranty that the data is fully anonymized, and does not contain anything
|
|
that can arguably be considered data about an individual, that could be
|
|
considered end-user data; or that could be sensitive or confidential to users.
|
|
|
|
|
|
Getting firmware
|
|
----------------
|
|
|
|
### Downloads (latest dev)
|
|
|
|
| Building status | SoC | U-Boot | Kernel | Rootfs |
|
|
|----------------------------|-------------|-------------|---------------|---------------|
|
|
| ![Hi3516Cv100 images][b1] | Hi3516CV100 | [uboot][u1] | [kernel][k1] | [rootfs][r1] |
|
|
| ![Hi3516Cv200 images][b2] | Hi3516CV200 | [uboot][u2] | [kernel][k2] | [rootfs][r2] |
|
|
| ![Hi3516Cv300 images][b3] | Hi3516CV300 | [uboot][u3] | [kernel][k3] | [rootfs][r3] |
|
|
| ![Hi3516Ev100 images][b4] | Hi3516EV100 | [uboot][u4] | [kernel][k4] | [rootfs][r4] |
|
|
| ![Hi3518Av100 images][b5] | Hi3518AV100 | [uboot][u5] | [kernel][k5] | [rootfs][r5] |
|
|
| ![Hi3518Cv100 images][b6] | Hi3518CV100 | [uboot][u6] | [kernel][k6] | [rootfs][r6] |
|
|
| ![Hi3518Ev100 images][b7] | Hi3518EV100 | [uboot][u7] | [kernel][k7] | [rootfs][r7] |
|
|
| ![Hi3518Ev200 images][b8] | Hi3518EV200 | [uboot][u8] | [kernel][k8] | [rootfs][r8] |
|
|
| ![Hi3518Ev201 images][b9] | Hi3518EV201 | [uboot][u9] | [kernel][k9] | [rootfs][r9] |
|
|
| ![Hi3520Dv100 images][b10] | Hi3520DV100 | ! | [kernel][k10] | [rootfs][r10] |
|
|
| ![Hi3520Dv200 images][b11] | Hi3520DV200 | ! | [kernel][k11] | [rootfs][r11] |
|
|
|
|
|
|
### Releases
|
|
|
|
The **releases** of the OpenIPC firmware are hosted at <https://github.com/OpenIPC/chaos_calmer/releases>.
|
|
|
|
|
|
### Source code
|
|
|
|
The **source code** of the OpenIPC firmware is hosted at <https://github.com/openipc/chaos_calmer>.
|
|
|
|
|
|
Building from source
|
|
--------------------
|
|
|
|
### Build on Linux machine
|
|
|
|
Usage example for Debian 8/9
|
|
|
|
```bash
|
|
git clone --depth=1 https://github.com/OpenIPC/chaos_calmer.git OpenIPC
|
|
cd OpenIPC
|
|
./Project_OpenIPC.sh update
|
|
./Project_OpenIPC.sh 16cv300_DEFAULT
|
|
```
|
|
|
|
|
|
### Use Docker for building
|
|
|
|
**Default Dockerfile.openipc**
|
|
|
|
```docker
|
|
FROM debian:stretch
|
|
|
|
RUN DEBIAN_FRONTEND=noninteractive apt-get update \
|
|
&& apt-get --no-install-recommends -y install bc bison build-essential \
|
|
ca-certificates cmake cpio curl dos2unix file flex gawk gcc-multilib \
|
|
gettext gettext-base git intltool libc6-dev liblocale-gettext-perl \
|
|
libncurses-dev libssl-dev locales mc openssl python rsync subversion \
|
|
time tofrodos unzip upx wget zlib1g-dev \
|
|
&& localedef -i en_US -c -f UTF-8 -A /usr/share/locale/locale.alias \
|
|
en_US.UTF-8 && rm -rf /var/lib/apt/lists/*
|
|
|
|
ENV LANG en_US.utf8
|
|
|
|
WORKDIR /src/openipc
|
|
|
|
RUN git clone --depth=1 https://github.com/OpenIPC/chaos_calmer.git /src/openipc
|
|
RUN ./Project_OpenIPC.sh update
|
|
RUN ./Project_OpenIPC.sh 18ev200_DEFAULT # <= Change this ID to you profile
|
|
```
|
|
|
|
**Start building**
|
|
|
|
```bash
|
|
#!/bin/bash
|
|
|
|
docker build -t openipc -f Dockerfile.openipc .
|
|
```
|
|
|
|
|
|
Preparing to install
|
|
--------------------
|
|
|
|
### Get access to U-boot
|
|
|
|
Serial (UART) connection to your camera device is required.
|
|
|
|
* CamHi | Press **Ctrl+C** in U-boot start and access password - HI2105CHIP
|
|
* Dahua | Press **Shift 8** in U-boot start
|
|
* JVT | Press **Ctrl+Q** in U-boot start
|
|
* XM | Press **Ctrl+C** in U-boot start
|
|
* SigmaStar | Press **Ctrl+B** (UNIV) or **Enter** (Anjvision) in U-boot start
|
|
|
|
|
|
### Backup original MAC
|
|
|
|
You should definitely write the original MAC of your device on the eth0 port.
|
|
|
|
This is **important** and will be necessary at the final stage of device configuration.
|
|
|
|
|
|
### Backup original firmware
|
|
|
|
#### 8M Flash
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0
|
|
mw.b 0x82000000 ff 1000000
|
|
sf read 0x82000000 0x0 0x800000
|
|
tftp 0x82000000 fullflash.img 0x800000
|
|
```
|
|
|
|
#### 16M Flash
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0
|
|
mw.b 0x82000000 ff 1000000
|
|
sf read 0x82000000 0x0 0x1000000
|
|
tftp 0x82000000 fullflash.img 0x1000000
|
|
```
|
|
|
|
#### 32M Flash
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0
|
|
mw.b 0x82000000 ff 2000000
|
|
sf read 0x82000000 0x0 0x2000000
|
|
tftp 0x82000000 fullflash.img 0x2000000
|
|
```
|
|
|
|
|
|
### Flash and memory layout
|
|
|
|
We have developed a universal partition system for camera flash chips,
|
|
and it is now available as standard for all types of devices. (Note
|
|
that it means it likely doesn't match vendor flash layout.)
|
|
|
|
#### OpenIPC flash layout
|
|
|
|
```txt
|
|
0x000000000000-0x000000040000 : "boot"
|
|
0x000000040000-0x000000050000 : "env"
|
|
0x000000050000-0x000000250000 : "kernel"
|
|
0x000000250000-0x000000750000 : "rootfs"
|
|
0x000000750000-0x000001000000 : "rootfs_data"
|
|
```
|
|
|
|
#### Kernel Memory Load Addresses
|
|
|
|
```txt
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16cv100) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16cv200) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16cv300) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16dv100) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16ev100) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16ev200) := 0x40008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_16ev300) := 0x40008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_18cv100) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_18ev100) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_18ev200) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_18ev201) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_18ev300) := 0x40008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_20dv100) := 0x80008000
|
|
loadaddr-$(CONFIG_TARGET_hi35xx_20dv200) := 0x80008000
|
|
```
|
|
|
|
|
|
Flashing new firmware
|
|
---------------------
|
|
|
|
**Attention!**
|
|
|
|
All examples indicate the download of firmware components via the TFTP server.
|
|
If your device does not have an Ethernet port, replace all `tftp` commands with
|
|
`fatload mmc 0:1`. For example:
|
|
|
|
```txt
|
|
tftp 0x82000000 openwrt-hi35xx-XXXXX-u-boot.bin
|
|
#
|
|
fatload mmc 0:1 0x82000000 openwrt-hi35xx-XXXXX-u-boot.bin
|
|
```
|
|
|
|
### Hi3516Cv100
|
|
|
|
**This type of board has additional Ethernet control systems via GPIO and
|
|
registers. Consult with experts!**
|
|
|
|
**Experimental devices:**
|
|
|
|
* 00:12:16:FA:F3:52
|
|
* 00:12:12:10:31:54 - BLK18C_0222_38x38_S_v1.03
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv100-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv100-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv100-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3516Cv200
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv200-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv200-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv200-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3516Cv300
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv300-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv300-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv300-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3516Ev100
|
|
|
|
**Experimental devices:**
|
|
|
|
* 00:12:13:02:d7:2c
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16ev100-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv300-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv300-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3518Cv100
|
|
|
|
**This type of board has additional Ethernet control systems via GPIO and
|
|
registers. Consult with experts!**
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18cv100-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv100-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-16cv100-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3518Ev100
|
|
|
|
**This type of board has additional Ethernet control systems via GPIO and
|
|
registers. Consult with experts!**
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18ev100-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18ev100-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18ev100-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3518Ev200
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18ev200-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18ev200-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-18ev200-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3520Dv100
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-20dv100-experimental-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-20dv100-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-20dv100-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
### Hi3520Dv200
|
|
|
|
```txt
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-20dv200-experimental-u-boot.bin
|
|
sf erase 0x0 0x50000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-20dv200-default-uImage
|
|
sf erase 0x50000 0x200000
|
|
sf write 0x82000000 0x50000 ${filesize}
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 openwrt-hi35xx-20dv200-default-root.squashfs
|
|
sf erase 0x250000 0x500000
|
|
sf write 0x82000000 0x250000 ${filesize}
|
|
```
|
|
|
|
|
|
Updating parts of the firmware
|
|
------------------------------
|
|
|
|
If you already have OpenIPC firmware installed, you can update individual
|
|
flash partitions from shell command line:
|
|
|
|
|
|
### Update u-boot
|
|
|
|
```bash
|
|
flashcp -v openwrt-hi35xx-XXXXX-u-boot.bin boot
|
|
```
|
|
|
|
**or**
|
|
|
|
```bash
|
|
flashcp -v openwrt-hi35xx-XXXXX-u-boot.bin /dev/mtd0
|
|
```
|
|
|
|
|
|
### Update kernel
|
|
|
|
```bash
|
|
flashcp -v openwrt-hi35xx-XXXXX-default-uImage kernel
|
|
```
|
|
|
|
|
|
### Update rootfs
|
|
|
|
```bash
|
|
flashcp -v openwrt-hi35xx-XXXXX-default-root.squashfs rootfs
|
|
```
|
|
|
|
|
|
Configuring system after installation
|
|
--------------------------------------
|
|
|
|
### Format overlayfs partition
|
|
|
|
**Must be executed on the first run!**
|
|
|
|
```txt
|
|
flash_eraseall -j /dev/$(awk -F ':' '/rootfs_data/ {print $1}' /proc/mtd)
|
|
reboot
|
|
```
|
|
|
|
|
|
### Installing the original MAC
|
|
|
|
**U-boot ENV and Linux UCI**
|
|
|
|
```txt
|
|
fw_setenv ethaddr 00:01:02:03:04:05
|
|
uci set network.lan.macaddr=00:01:02:03:04:05
|
|
uci commit
|
|
```
|
|
|
|
|
|
### Installing the correct sensor
|
|
|
|
**Specify your correct sensor, control type, and data bus**
|
|
|
|
```txt
|
|
fw_setenv sensor imx291_i2c_lvds
|
|
```
|
|
|
|
|
|
Resetting configuration
|
|
-----------------------
|
|
|
|
If something went wrong, you can reset configuration to defaults.
|
|
|
|
|
|
### Clean overlayfs (reset)
|
|
|
|
**Restore to default Linux settings**
|
|
|
|
```txt
|
|
firstboot
|
|
reboot
|
|
```
|
|
|
|
|
|
### Clean u-boot env
|
|
|
|
**Restore to default u-boot env**
|
|
|
|
```txt
|
|
flash_eraseall -j /dev/$(awk -F ':' '/env/ {print $1}' /proc/mtd)
|
|
reboot
|
|
```
|
|
|
|
|
|
### Recover backup firmware
|
|
|
|
If something goes horribly wrong and you want back your backed up firmware
|
|
|
|
**Restore backup up firmware via serial**
|
|
|
|
Install kermit using [this instruction](https://glasstty.com/?p=662) or similar.
|
|
Here are the sample commands for 8MB Flash.
|
|
|
|
```
|
|
kermit
|
|
Linux Kermit> CONNECT
|
|
Connecting to /dev/ttyUSB0, speed 115200
|
|
Escape character: Ctrl-\ (ASCII 28, FS): enabled
|
|
Type the escape character followed by C to get back,
|
|
or followed by ? to see other options.
|
|
----------------------------------------------------
|
|
## Total Size = 0x002fb3f1 = 3126257 Bytes
|
|
## Start Addr = 0x82000000
|
|
OpenIPC # sf probe 0
|
|
8192 KiB hi_sfc at 0:0 is now current device
|
|
OpenIPC # mw.b 0x82000000 ff 1000000
|
|
OpenIPC # loadb 0x82000000
|
|
## Ready for binary (kermit) download to 0x82000000 at 115200 bps...
|
|
|
|
(Back at alex-B85M-D3H)
|
|
----------------------------------------------------
|
|
Linux Kermit> SEND /srv/tftp/fullflash.img
|
|
Linux Kermit> CONNECT
|
|
Connecting to /dev/ttyUSB0, speed 115200
|
|
Escape character: Ctrl-\ (ASCII 28, FS): enabled
|
|
Type the escape character followed by C to get back,
|
|
or followed by ? to see other options.
|
|
----------------------------------------------------
|
|
## Total Size = 0x00800000 = 8388608 Bytes
|
|
## Start Addr = 0x82000000
|
|
OpenIPC # sf erase 0x0 0x00800000
|
|
Erasing at 0x800000 -- 100% complete.
|
|
OpenIPC # sf write 0x82000000 0x0 ${filesize}
|
|
Writing at 0x800000 -- 100% complete.
|
|
OpenIPC #
|
|
```
|
|
**Restore backup up firmware via TFTP**
|
|
|
|
Here are the commands for 8MB Flash.
|
|
|
|
```
|
|
setenv ipaddr 192.168.1.10
|
|
setenv serverip 192.168.1.254
|
|
sf probe 0; sf lock 0
|
|
|
|
mw.b 0x82000000 ff 1000000
|
|
tftp 0x82000000 fullflash.img
|
|
sf erase 0x0 0x00800000
|
|
sf write 0x82000000 0x0 ${filesize}
|
|
```
|
|
|
|
|
|
## Reference Book
|
|
|
|
To be written...
|
|
|
|
### Vendors
|
|
|
|
* [ACTi](https://www.acti.com/)
|
|
* [Anjvision](http://www.anjvision.com/), <http://icamra.cn/>
|
|
* [Ansjer](https://www.ansjer.com/)
|
|
* [Anviz](http://www.anviz.com/)
|
|
* [Brovotech](https://brovotech.com/)
|
|
* [Cantonk](http://cantonk.com/)
|
|
* [CCDCAM](http://www.ccdcam.com/) th?
|
|
* [Filsion/Camasmart](http://www.camasmart.com/)
|
|
* [FSAN](http://www.fsan.cn/)
|
|
* [Herospeed](http://www.herospeed.net/en/)
|
|
* [IPCAM](http://www.ipcam.xin/)
|
|
* [Jovision](http://www.jovision.com/)
|
|
* [JVT](http://www.jvt.cc/)
|
|
* [LENOTEL](http://www.lenoteltechnology.com/) th?
|
|
* [Longse](http://www.longse.com/)
|
|
* [Milesight](http://www.milesight.com/)
|
|
* [Raysharp](http://raysharp.cn/en/)
|
|
* [Ruision](http://www.ruision.com/?lang=en)
|
|
* [Safer](http://www.safer.net.cn/) th?
|
|
* [Synuwo](http://www.sunywo.com/)
|
|
* [Tiandy](http://en.tiandy.com/)
|
|
* [Topsee](http://www.en.tpsee.com/)
|
|
* [TVT](http://www.tvt.net.cn/)
|
|
* [UNIVIEW](http://uniview.com/)
|
|
* [VandSec/Yoosee](http://vandsec.com/) th?
|
|
* [VStarcam](http://www.vstarcam.com/) th?
|
|
* [Wansview](http://wansview.com/)
|
|
* [XM](http://www.xiongmaitech.com/en/)
|
|
* [Z-BEN](http://www.z-ben.cn/) th?
|
|
* [ZOSI](https://www.zositech.com/)
|
|
|
|
_th? -- possibly a trading house_
|
|
|
|
[1]: https://aliexpress.com/item/32493067946.html
|
|
[2]: https://aliexpress.com/item/32851596596.html
|
|
[3]: https://aliexpress.com/item/1005002315913099.html
|
|
[4]: https://aliexpress.com/item/1005002298832047.html
|
|
[5]: https://aliexpress.com/item/4000119561119.html
|
|
[6]: https://aliexpress.com/item/4000054902736.html
|
|
[7]: https://aliexpress.com/item/1005001933429701.html
|
|
[8]: https://translate.google.com/translate?sl=ru&tl=en&u=https://www.cctvsp.ru/articles/obzor-i-sravnenie-matrits-dlya-kamer-videonablyudeniya
|
|
[9]: https://github.com/OpenIPC/firmware/wiki/majestic_streamer
|
|
|
|
[b1]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv100_images.yml/badge.svg?branch=master
|
|
[b2]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv200_images.yml/badge.svg?branch=master
|
|
[b3]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv300_images.yml/badge.svg?branch=master
|
|
[b4]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv300_images.yml/badge.svg?branch=master
|
|
[b5]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv100_images.yml/badge.svg?branch=master
|
|
[b6]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv100_images.yml/badge.svg?branch=master
|
|
[b7]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv100_images.yml/badge.svg?branch=master
|
|
[b8]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv200_images.yml/badge.svg?branch=master
|
|
[b9]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3516cv200_images.yml/badge.svg?branch=master
|
|
[b10]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3520dv200_images.yml/badge.svg?branch=master
|
|
[b11]: https://github.com/openipc/chaos_calmer/actions/workflows/hi3520dv200_images.yml/badge.svg?branch=master
|
|
|
|
[u1]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv100-u-boot.bin
|
|
[u2]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv200-u-boot.bin
|
|
[u3]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv300-u-boot.bin
|
|
[u4]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16ev100-u-boot.bin
|
|
[u5]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18av100-u-boot.bin
|
|
[u6]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18cv100-u-boot.bin
|
|
[u7]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev100-u-boot.bin
|
|
[u8]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev200-u-boot.bin
|
|
[u9]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev201-u-boot.bin
|
|
|
|
[k1]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv100-default-uImage
|
|
[k2]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv200-default-uImage
|
|
[k3]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv300-default-uImage
|
|
[k4]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16ev100-default-uImage
|
|
[k5]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18av100-default-uImage
|
|
[k6]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18cv100-default-uImage
|
|
[k7]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev100-default-uImage
|
|
[k8]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev200-default-uImage
|
|
[k9]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev201-default-uImage
|
|
[k10]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-20dv100-default-uImage
|
|
[k11]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-20dv200-default-uImage
|
|
|
|
[r1]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv100-default-root.squashfs
|
|
[r2]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv200-default-root.squashfs
|
|
[r3]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16cv300-default-root.squashfs
|
|
[r4]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-16ev100-default-root.squashfs
|
|
[r5]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18av100-default-root.squashfs
|
|
[r6]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18cv100-default-root.squashfs
|
|
[r7]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev100-default-root.squashfs
|
|
[r8]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev200-default-root.squashfs
|
|
[r9]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-18ev201-default-root.squashfs
|
|
[r10]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-20dv100-default-root.squashfs
|
|
[r11]: https://github.com/OpenIPC/chaos_calmer/releases/download/latest/openwrt-hi35xx-20dv200-default-root.squashfs
|