OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity
wiki/en/device-wyze-integration.md

3.2 KiB
Raw Blame History

OpenIPC Wiki

Table of Content

Wyze integration

This is where we'll be writing down our guide to flashing new devices and reports on our experiments.

Known camera modifications

MODEL IC FCC ID PCB VER SoC WIFI NOTES
WYZEC3 25466-WYZEC3 2AUIUWYZEC3 WYZEV3_T31GC2053 V1.4_20201010 T31ZX SDIO: Realtek 8189FTV MAC: 7C:78:B2:69:95:C9 https://t.me/openipc/49957 https://youtu.be/t7Nzo-KXTH0
WYZEC3 25466-WYZEC3A 2AUIUWYZEC3A WYZEV3_T31GC2053 V1.2_20200715 T31X SDIO: Realtek 8189FTV MAC: 7C:78:B2:99:6E:BA https://youtu.be/jm4wze_HY78
WYZEC3 25466-WYZEC3A 2AUIUWYZEC3A WYZEV3_T31GC2053 V2.02_20210523 T31ZX SDIO: AltoBeam 6031 https://t.me/openipc/49049 https://t.me/openipc/49050
WYZEC3 25466-WYZEC3A 2AUIUWYZEC3A WYZEV3_T31GC2053 V2.03_20211206 T31X SDIO: AltoBeam 6031 https://t.me/openipc/45444 https://t.me/openipc/48942
WYZEC3 25466-WYZEC3B 2AUIUWYZEC3B WYZEV3_T31GC2053 V2.02_20210523 T31ZX SDIO: Realtek 8189FTV MAC: D0:3F:27:46:A7:7B https://t.me/openipc/38728 https://t.me/openipc/38753
WYZEC3 25466-WYZEC3B 2AUIUWYZEC3B WYZEV3_T31GC2053 V2.03_20211206 T31X SDIO: Realtek 8189FTV MAC: D0:3F:27:AD:72:51 https://t.me/openipc/76036
WYZEC3 25466-WYZEC3F 2AUIUWYZEC3F WYZEV3_T31AGC2053 V3.2_20210714 T31A BGA SDIO: AltoBeam 6031 https://t.me/openipc/43299 https://t.me/openipc/38755 https://t.me/openipc/38757
WYZEC3 25466-WYZEC3F 2AUIUWYZEC3F WYZEV3_T31AGC2053 V3.2_20210714 T31A BGA SDIO: AltoBeam 6031 MAC: D0:3F:27:4F:23:19 https://youtu.be/VkqX9yg0odU

Wyze Cam Pan v3 cameras have hardware lock in secureboot and cannot be upgraded to OpenIPC!

OpenIPC installation

Use these scripts to convert your Wyze Cam V3 to OpenIPC.

Current issues

  • Exposure does not work well https://github.com/OpenIPC/majestic/issues/102
  • SD card does not work in the U-Boot (power is available) fixed
  • Problem with loading u-boot from an microSD card. It doesn't reach the promt. Not only on wyze v3 (https://t.me/openipc_modding/179369), but also on another board T31L (https://t.me/openipc/47739). Most likely it will be IMPOSSIBLE, because in the camera there is a microSD power management MOSFET, which must be turned on BEFORE booting from the card (the experiment with not fully loaded u-boot was possible due to direct power supply to the microSD card, bypassing the transistor). Please confirm my version if it is not possible otherwise. impossible without modification (direct 3.3V power supply to the microSD card reader)