wiki/en/u-boot-settings.md

41 lines
1.0 KiB
Markdown

# OpenIPC Wiki
[Table of Content](../README.md)
U-Boot settings
---------------
### bootdelay
Use this to set the delay before we start the kernel, This is the time where you can get into the bootloader.
### bootnfs
To be continued...
### ethaddr
Mandatory setting, available in all OpenIPC bootloaders
### gatewayip
This is the camera's gateway IP address, Mostly used for when you are flasing using TFTP in U-Boot.
### ipaddr
This is the camera's IP address, Mostly used for when you are flasing using TFTP in U-Boot.
### netaddr_fallback
Sets the fallback address on the Ethernet interface if WiFi is enabled
### osmem
Mandatory setting, available in all OpenIPC bootloaders
### sensor
The type of sensor used on the device is set automatically in most cases
### upgrade
Specify the full path to the archive with custom OpenIPC firmware in .tgz format
### wlandev
The Wi-Fi Driver to use for the Wi-Fi interface. ([Learn how to use it here](../en/wireless-settings.md))
### wlanmac
The MAC for the Wi-Fi Interface.