wiki/en/fpv-nvr.md

OpenIPC Wiki

Table of Content

Selecting hardware to complete OpenIPC FPV kits

Upgrade HI3536 NVR board to OpenIPC FPV firmware

• download actual firmware from OpenIPC site
• unpack firmware archive to your TFTP server
• connect UART adapter to NVR board
• go to u-boot (press Ctrl+C)
• execute a set of commands each line separately, changing the ip address of the nvr board and the ip address of your tftp server

setenv ipaddr 192.168.0.222
setenv serverip 192.168.0.8
setenv netmask 255.255.255.0
setenv bootcmd 'sf probe 0; sf read 0x82000000 0x50000 0x200000; bootm 0x82000000'
setenv uk 'mw.b 0x82000000 ff 1000000; tftp 0x82000000 uImage.${soc}; sf probe 0; sf erase 0x50000 0x200000; sf write 0x82000000 0x50000 ${filesize}'
setenv ur 'mw.b 0x82000000 ff 1000000; tftp 0x82000000 rootfs.squashfs.${soc}; sf probe 0; sf erase 0x250000 0x800000; sf write 0x82000000 0x250000 ${filesize}'
setenv bootargs 'mem=192M console=ttyAMA0,115200 panic=20 root=/dev/mtdblock3 rootfstype=squashfs init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel),8192k(rootfs),-(rootfs_data)'
setenv osmem '192M'
setenv totalmem '256M'
setenv soc 'hi3536dv100'
setenv da; setenv du; setenv dr; setenv dw; setenv dl; setenv dc; setenv up; setenv tk; setenv dd; setenv de; setenv jpeg_addr
setenv jpeg_size; setenv vobuf; setenv loadlogo; setenv appVideoStandard; setenv appSystemLanguage; setenv appCloudExAbility
saveenv

run uk
run ur

reset