OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity

minor edits

pull/343/head
Pun0110 2024-03-20 00:04:33 +03:00
parent f763c0ab8a
commit d8839b294c
1 changed files with 10 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
en/device-IPC-RM1-BLK7202V3-M43A-WIFI.md
View File

@ -13,7 +13,9 @@
- [TODO](#TODO) - [TODO](#TODO)
# Overview # Overview
Board found in cheap indoor Cootli WiFi PTZ cam. Looks very similar to XM IPG-G4-WR-BL but PCB layout a bit different. Board found in cheap indoor Cootli WiFi PTZ cam. Board looks very similar to [XM IPG-G4-WR-BL](http://baike.xm030.cn:81/%E4%BA%A7%E5%93%81%E5%8F%82%E6%95%B0/English/IPG%E6%A8%A1%E7%BB%84/Parameters%20for%20IPG-G4-WR.pdf) but PCB layout a bit different.
All tests are complete on [gk7202v300_lite_cootli_camv0103-nor](https://github.com/OpenIPC/builder/releases/download/latest/gk7202v300_lite_cootli_camv0103-nor.tgz) firmware (build Feb 8 2024).
## Device info ## Device info
| System | Description | Comments | | System | Description | Comments |
@ -41,12 +43,10 @@ PCB markings
![PCB markings](../images/device-IPC-RM1-BLK7202V3-M43A-WIFI_markings.jpg) ![PCB markings](../images/device-IPC-RM1-BLK7202V3-M43A-WIFI_markings.jpg)
# Connectors # Connectors
Connectors type JST 1.25mm Connectors type JST 1.25mm
![JST Connector](../images/device-IPC-RM1-BLK7202V3-M43A-WIFI_connectors.jpg) ![JST Connector](../images/device-IPC-RM1-BLK7202V3-M43A-WIFI_connectors.jpg)
## Front side ## Front side
| Connector | Description | | Connector | Description |
|:-:|:-| |:-:|:-|
| IRCUT | 2pin JST | | IRCUT | 2pin JST |
@ -54,7 +54,6 @@ Connectors type JST 1.25mm
| MIC | 2pin JST | | MIC | 2pin JST |
## Back side ## Back side
- Micro SD Card Socket - Micro SD Card Socket
- UART (unsoldered, to the left of SPK, pin1 RX, pin2 TX) - UART (unsoldered, to the left of SPK, pin1 RX, pin2 TX)
@ -67,7 +66,6 @@ Connectors type JST 1.25mm
| RF | UF.L (IPX) | | RF | UF.L (IPX) |
# GPIOs # GPIOs
| GPIO | Connector | Description | | GPIO | Connector | Description |
|:-:|:-:|:-:| |:-:|:-:|:-:|
| 0* | - | Reset button | | 0* | - | Reset button |
@ -91,13 +89,14 @@ Connectors type JST 1.25mm
\* - unconfirmed. \* - unconfirmed.
## Muxing ## Muxing
If Majestic takes control over pins, no unmuxing required. Otherwise, this can be done using the following commands. If Majestic takes control over pins, no muxing required. Otherwise, muxing can be done using the following commands.
Unmuxing GPIO16 for enabling IRLED control: Muxing GPIO16 for taking control over IRLED pin:
```sh ```sh
devmem 0x120c0020 32 0x432 # GPIO2_0 (GPIO16) devmem 0x120c0020 32 0x432 # GPIO2_0 (GPIO16)
``` ```
Also for motors.
Unmuxing GPIO12, GPIO14, GPIO15 (motors H connector): Unmuxing GPIO12, GPIO14, GPIO15 (motors H connector):
```sh ```sh
devmem 0x120c0010 32 0x1e02 # GPIO1_4 (GPIO12) devmem 0x120c0010 32 0x1e02 # GPIO1_4 (GPIO12)
@ -133,9 +132,9 @@ mmc rescan
``` ```
## Speaker ## Speaker
Device supports playing PCM signed 16-bit little-endian, 8000 Hz, 1CH by sending data to http://192.168.0.10/play_audio endpoint.
Device support playing PCM signed 16-bit little-endian, 8000 Hz, mono. Audio file can be encoded like this:
Audio can be encoded like this:
```sh ```sh
ffmpeg -i input.wav -f s16le -ar 8000 -ac 1 output.pcm ffmpeg -i input.wav -f s16le -ar 8000 -ac 1 output.pcm
``` ```
@ -146,14 +145,13 @@ curl -v -u user:pass -H "Content-Type: application/json" -X POST --data-binary @
``` ```
# Flashing # Flashing
Stock firmware is pwd locked, LAN interface does not present, so I'm guessing following methods are available to flash this board:
Stock firmware is pwd locked, LAN does not presend, so I'm guessing following methods are available to flash this board:
- [burn](https://github.com/OpenIPC/burn) + [u-boot-gk7202v300-universal.bin](https://github.com/OpenIPC/firmware/releases/download/latest/u-boot-gk7202v300-universal.bin) and loading FW thru X/Y/ZMODEM (e.g. loady. Tip: use baud option for speed up) - [burn](https://github.com/OpenIPC/burn) + [u-boot-gk7202v300-universal.bin](https://github.com/OpenIPC/firmware/releases/download/latest/u-boot-gk7202v300-universal.bin) and loading FW thru X/Y/ZMODEM (e.g. loady. Tip: use baud option for speed up)
- load FW from SD card (need power ON, see above) - load FW from SD card (need power ON, see above)
- load full image thru stock web interface (untested) - load full image thru stock web interface (untested)
- Flash programmer
# Symmary # Symmary
- [X] WiFi works - [X] WiFi works
- [X] Video tested/streamed - [X] Video tested/streamed
- [X] Day/night works (IRCUT and IRLED) - [X] Day/night works (IRCUT and IRLED)