mirror of https://github.com/OpenIPC/wiki.git
Sync with PR #422
Igor Zalatov
parent
f25839cba9
commit
8c8d6abe72
|
|
@ -1,222 +1,175 @@
|
||||||
# OpenIPC Wiki
|
# OpenIPC Wiki
|
||||||
[Table of Content](../README.md)
|
[Table of Contents](../README.md)
|
||||||
|
|
||||||
OpenIPC AIO "Mario"
|
## OpenIPC AIO "Mario"
|
||||||
-------------------
|
### [Product Link](https://store.openipc.org/OpenIPC-AIO-Mario-v1-0-p633320808)
|
||||||
|
|
||||||
https://store.openipc.org/OpenIPC-AIO-Mario-v1-0-p633320808
|
|
||||||
|
|
||||||
|
**Note:** Remove the lens cover film before use.
|
||||||
|
|
||||||
Remove the lens cover film befor use
|
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
### Installation Overview
|
||||||
|
The OpenIPC AIO "Mario" integrates seamlessly with various RC planes and drones. To ensure proper functionality, follow these installation steps carefully:
|
||||||
|
|
||||||
|
#### Step 1: Secure the Camera Case
|
||||||
|
- **Mounting:** Use the provided four M1.2 screws to secure the camera case. The side mount holes are compatible with M2 screws.
|
||||||
|
|
||||||
The Mario camera case with 4x M1.2 screws.
|
#### Step 2: Antenna Installation
|
||||||
|
- **Install Antennas:** Attach the antennas designed for AIO to ensure optimal signal reception.
|
||||||
|
|
||||||
Side mount holes are M2 x2 screw thread.
|
|
||||||
|
|
||||||
Install atennas for AIO.
|
#### Step 3: Cable Connections
|
||||||
|
Connect the following cables from the OpenIPC AIO "Mario" to your flight controller (e.g., SpeedyBee F405 WING):
|
||||||
|
|
||||||
|
- **GND (Ground):** Connect to the ground pin on the flight controller. This is crucial for stable power and signal integrity.
|
||||||
|
- **VCC (Power):** Connect to the VCC pin on the flight controller. This pin typically provides the necessary power supply (make sure the voltage matches your flight controller specifications).
|
||||||
|
- **RX (Receive):** Connect to the TX pin on the flight controller. This allows the AIO to receive data from the flight controller.
|
||||||
|
- **TX (Transmit):** Connect to the RX pin on the flight controller. This enables the AIO to send data back to the flight controller.
|
||||||
|
|
||||||
|
Ensure that all connections are secure and insulated to prevent any shorts or signal interference.
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
### LED function
|
### Additional Setup Considerations
|
||||||
|
- Before powering on, double-check all connections for correctness.
|
||||||
|
- Refer to your flight controller's manual for specific pin locations and configurations.
|
||||||
|
- If applicable, configure your flight controller to recognize the AIO camera in its settings for optimal performance.
|
||||||
|
|
||||||
Red glimmering Power on with Battery
|
---
|
||||||
|
|
||||||
Red Wired linked
|
### LED Functions
|
||||||
|
The status LEDs indicate different power states:
|
||||||
Blue flash RF transmitter
|
- **Red (Glimmering):** Power on with battery
|
||||||
|
- **Red:** Wired connection established
|
||||||
Green TBD
|
- **Blue (Flashing):** RF transmitter active
|
||||||
|
- **Green:** To Be Determined (TBD)
|
||||||
Board Size 30mmx32mm with 4*M2 mount holes.
|
|
||||||
|
|
||||||
Heat Sink with 20mmx20mm mount holes.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#### Board Specifications
|
||||||
|
- **Board Size:** 30mm x 32mm with 4 M2 mount holes
|
||||||
|
- **Heat Sink Size:** 20mm x 20mm mount holes
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
### Power Section
|
### Power Section
|
||||||
|
#### Power Input:
|
||||||
|
- Accepts 2S-6S battery input.
|
||||||
|
|
||||||
Power input:
|
#### On-Board BEC Capacity:
|
||||||
|
- **RF BEC:** Up to 3A, 5V output
|
||||||
|
- **MSIC BEC:** Up to 2A, 5V output
|
||||||
|
|
||||||
2S-6S
|
To enter U-Boot, connect a UART device to the top of the AIO board (R0, T0 pads).
|
||||||
|
|
||||||
The on board dualway BEC Capacity:
|
#### Adjusting Voltage Input
|
||||||
|
To achieve lower voltage input for DC:
|
||||||
|
- A 2S-3S battery requires four wires connected for adequate current. Higher voltage (4S+) may only need a two-wire connection.
|
||||||
|
- Remove two resistors to lower the input voltage to as low as 5.4V.
|
||||||
|
|
||||||
RF BEC on board is up to 3A 5V output
|
|
||||||
|
|
||||||
MSIC BEC on board is up to 2A 5V output
|
---
|
||||||
|
|
||||||
enter uboot use uart device connect to top of AIO board(R0,T0)pad.
|
### Connecting USB Debug Port
|
||||||
|
1. **Connect USB Cable:** Attach the USB cable between the AIO and your PC.
|
||||||
|
2. **Power On:** Turn on the DC or use USB power only.
|
||||||
|
|
||||||
How to get lower voltage input for DC input
|
If your computer detects unknown USB devices, install the required [corechip-sr9900 drivers](https://github.com/user-attachments/files/16829005/corechip-sr9900-usb20-to-fast-ethernet-adapter-1750095.zip).
|
||||||
|
|
||||||
AIO power supply from 2s-3S battery needed more current and required 4wires connected, but higher voltage 4S+ may works 2wire connection.
|
#### Mac OS Operations
|
||||||
|
|
||||||
|
|
||||||
Remove two resistors then you can get input as low as 5.4V input available.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
### Auto Setup on Windows
|
||||||
|
1. Download the [Auto_Set_Mario_CDC.zip](https://github.com/user-attachments/files/17010487/Auto_Set_Mario_CDC.zip) file, unzip it, and run it as an administrator.
|
||||||
|
2. Alternatively, set it up manually:
|
||||||
|
- Go to **Control Panel** > **Internet** > **Network**.
|
||||||
|
- Find the USB 2.0 to Fast Ethernet Adapter.
|
||||||
|
- Set the IPv4 address to `192.168.1.11` and mask to `255.255.255.0`.
|
||||||
|
- Apply the settings.
|
||||||
|
3. Open SSH to connect to the AIO at address `192.168.1.10` with the following credentials:
|
||||||
|
- **User:** root
|
||||||
|
- **Password:** 12345
|
||||||
|
|
||||||
|
#### Internet Access for AIO
|
||||||
|
1. Open **Network Connections** on Windows.
|
||||||
|
2. Right-click your main network adapter and select **Properties**.
|
||||||
|
3. Under **Sharing**, allow other network users to choose USB CDC.
|
||||||
|
|
||||||
### Connect usb debug port
|
|
||||||
|
|
||||||
Plug USB cable to connect AIO and PC first, then power on DC, or usb power only.
|
Apply settings, and the CDC Ethernet will automatically receive an IP address of `192.168.137.1`.
|
||||||
|
|
||||||
If there are unknown USB devices in the computer, the following [corechip-sr9900](https://github.com/user-attachments/files/16829005/corechip-sr9900-usb20-to-fast-ethernet-adapter-1750095.zip) drivers need to be installed.
|
|
||||||
|
|
||||||
Operations on Mac OS
|
4. Open an admin terminal and use `arp -a` to find the AIO's IP.
|
||||||
|
|
||||||
<img width="686" alt="Screenshot 2024-09-21 at 10 07 24 AM" src="https://github.com/user-attachments/assets/15fde52d-8f14-4377-87ed-cec6e05dc70a">
|
|
||||||
|
|
||||||
<img width="714" alt="Screenshot 2024-09-21 at 10 09 18 AM" src="https://github.com/user-attachments/assets/ce029aab-7505-41f8-81fc-283e41dfe84a">
|
*Example AIO IP:* `192.168.137.147`
|
||||||
|
|
||||||
<img width="544" alt="Screenshot 2024-09-21 at 10 11 31 AM" src="https://github.com/user-attachments/assets/97aff8d8-1a1b-4682-a304-4af58a29e68a">
|
Now you can use SSH to connect to AIO.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
You can now execute `sysupgrade -r -k -n --force_ver` to update your firmware.
|
||||||
|
|
||||||
#### Autosetup in windows
|
---
|
||||||
Please download [Auto_Set_Mario_CDC.zip](https://github.com/user-attachments/files/17010487/Auto_Set_Mario_CDC.zip) file, unzip it and run as administrator.
|
|
||||||
|
|
||||||
or setting manually as follows:
|
### Firmware Upgrade
|
||||||
|
Firmware updates can be performed via SD card or using WinSCP to drag the root filesystem and kernel files to `/tmp`.
|
||||||
|
|
||||||
go to control panel- internet -network:
|
Use the following command to upgrade:
|
||||||
|
You can download firmware for updates [here](https://github.com/OpenIPC/wiki/blob/master/en/fpv-openipc-aio-ultrasight.md#software).
|
||||||
|
|
||||||
find a usb2.0 to fast Ethernet Adapter
|
For discussions and suggestions, visit:
|
||||||
|
- [Telegram Discussion 1](https://t.me/c/1809358416/98818/103632)
|
||||||
|
- [Telegram Discussion 2](https://t.me/c/1809358416/98818/108052)
|
||||||
|
|
||||||
set this card ipv4 address to 192.168.1.11 mask:255.255.255.0
|
You may also use the configurator available at: [OpenIPC Configurator](https://github.com/OpenIPC/configurator).
|
||||||
|
|
||||||
apply
|
---
|
||||||
|
|
||||||
then open ssh to connect AIO address:192.168.1.10
|
### RF Section
|
||||||
|
#### RF Antenna Characteristics
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
user:root password:12345
|
#### Recommended RF Settings
|
||||||
|
- **Max RF Power:** 18dBm for onboard PA input.
|
||||||
|
- For **1T1R RF settings:** Range from 1-63; ensure firmware is updated to the latest version.
|
||||||
|
- Set `stbc=0` and `ldpc=0` with recommended RF power values below 45.
|
||||||
|
- Use MCS index 1,3 (0-7 for 1T1R; 8+ for 2T2R).
|
||||||
|
- **Video Bitrate Options:** 4096 / 8192 / 12688 (for MCS 3+).
|
||||||
|
- When using `stbc=1` and `ldpc=1`, recommend RF power settings for MCS3 between 8-15 for testing.
|
||||||
|
- Keep RF power at or below 15 during bench tests (when only USB is connected).
|
||||||
|
|
||||||
**How to get internet for AIO**
|
---
|
||||||
|
|
||||||
1.Open network connections on you windows, right click your main network adapter properties---Sharing: Allow other network users choose USB CDC
|
### SD Slot for Air Camera Record
|
||||||
|
During bench testing or debugging, the recording function is disabled by default. To enable recording, set the `record value` to `true` in `majestic.yaml`. Ensure the SD card is inserted before powering on.
|
||||||
|
|
||||||
|
**Onboard Heat Sink and Cooling Fan:**
|
||||||
|
- Cooling fan output power is up to 500mA max.
|
||||||
|
- Adjust `thermal throttle` as needed.
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
Apply,then the CDC ethernet will got a ip address 192.168.137.1 automaticlly
|
### Additional Resources
|
||||||
|
For further assistance and updates, refer to:
|
||||||
|
- [OpenIPC Wiki](https://github.com/OpenIPC/wiki)
|
||||||
|
- [OpenIPC Community](https://t.me/OpenIPC)
|
||||||
|
|
||||||
open admin terminal
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
using arp -a to find AIO's IP
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
here 192.168.137.147 is my AIO's ip address.
|
|
||||||
|
|
||||||
open ssh connect to AIO,Done.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Now you can use sysupgrade -r -k -n --force_ver to update your firmware.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
### Upgrade firmware
|
|
||||||
|
|
||||||
Update firmware possible via SD card or just use win scp drug the rootfs and kernel files to /tmp
|
|
||||||
|
|
||||||
```
|
|
||||||
sysupgrade -n -z --kernel=/tmp/uImage.ssc338q --rootfs=/tmp/rootfs.squashfs.ssc338q
|
|
||||||
```
|
|
||||||
|
|
||||||
You can [download](https://github.com/OpenIPC/wiki/blob/master/en/fpv-openipc-aio-ultrasight.md#software) firmware via the link that is used for online updates.
|
|
||||||
|
|
||||||
You can also read the current discussions and suggestions here:
|
|
||||||
|
|
||||||
- https://t.me/c/1809358416/98818/103632
|
|
||||||
- https://t.me/c/1809358416/98818/108052
|
|
||||||
|
|
||||||
Or just use the configurator - https://github.com/OpenIPC/configurator
|
|
||||||
|
|
||||||
|
|
||||||
### RF section
|
|
||||||
|
|
||||||
RF antenna characteristics
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Default Antenna is ANT1 for 1T1R, ANT0+ANT1 is 2T2R
|
|
||||||
|
|
||||||
Reconmand RF setting
|
|
||||||
|
|
||||||
RF Power max 18dbm for onbard PA input.
|
|
||||||
For 1T1R rf setting range: 1-63 firmware update to latest!
|
|
||||||
stbc=0,ldpc=0 Recommand RF power value < 45
|
|
||||||
|
|
||||||
MCS index 1,3(0-7 is 1T1R, 8+ is 2T2R)
|
|
||||||
|
|
||||||
Video bitrate:4096 /8192/12688(mcs 3+)
|
|
||||||
|
|
||||||
when you use stbc=1,ldpc=1 we recommand RF power setting for MCS3 from 8-15 for test.
|
|
||||||
|
|
||||||
Keep RF power < = 15 when on bench test(when only usb connect)
|
|
||||||
|
|
||||||
|
|
||||||
### SD solt for Air camera record
|
|
||||||
|
|
||||||
On bench test or debug the record function is disabled by default.
|
|
||||||
|
|
||||||
To enable the recording function set (record value)true in majestic.yaml
|
|
||||||
|
|
||||||
SD card must be inserted before Powering.
|
|
||||||
|
|
||||||
|
|
||||||
**On board heat sink and cooling fan:**
|
|
||||||
|
|
||||||
cooling fan out put power up to 500mA max
|
|
||||||
|
|
||||||
all heat sink mount holes are M2 screws thread.
|
|
||||||
|
|
||||||
|
|
||||||
### Extend connector**
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
**NOTE**
|
|
||||||
|
|
||||||
USB only for debug mode, when DC power only, the cdc ethernet works in sleep mode to save energy.
|
|
||||||
|
|
||||||
In USB power only mode, the Power is limited to 5W input.
|
|
||||||
|
|
||||||
**Upgrade Firmware to Ruby FPV**
|
|
||||||
|
|
||||||
plug usb cable and setting cdc ethernet ipv4: 192.168.1.11 255.255.255.0
|
|
||||||
|
|
||||||
use winscp drag unzip files to /tmp
|
|
||||||
|
|
||||||
use ssh login and copy following command:
|
|
||||||
|
|
||||||
sysupgrade --kernel=/tmp/uImage.ssc338q --rootfs=/tmp/rootfs.squashfs.ssc338q -z -n
|
|
||||||
|
|
||||||
after update and reboot
|
|
||||||
|
|
||||||
use ssh login and set command:
|
|
||||||
|
|
||||||
fw_setenv sensor imx335 && fw_setenv upgrade https://github.com/OpenIPC/firmware/releases/download/latest/openipc.ssc338q-nor-rubyfpv.tgz && reboot
|
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue