Merge pull request #387 from KennyPlus/master

Sync

en/fpv-openipc-aio-mario.md

@@ -5,3 +5,89 @@ OpenIPC AIO "Mario"
 -------------------
 
 https://store.openipc.org/OpenIPC-AIO-Mario-v1-0-p633320808
+
+![image](https://github.com/user-attachments/assets/ad675599-61ce-4cec-a9bf-5933d907c53a)
+
+
+**LED function**
+Red glimmering	Power on with Battery
+
+Red 	Wired linked
+
+Blue flash	RF transmitter
+
+Green	TBD
+
+Board Size 30*32mm with 4*M2 mount holes.
+
+Heat Sink with 20mmx20mm mount holes.
+
+![image](https://github.com/user-attachments/assets/1c7e34c1-76a9-45ee-9caf-ffd33261e154)
+
+
+
+
+**Power Section**
+
+Power input:
+
+2S-6S
+
+The on board dualway BEC Capacity:
+
+RF BEC on board is up to 3A 5V output
+
+MSIC BEC on board is up to 2A 5V output
+
+enter uboot use  uart device connect to top of AIO board(R0,T0)pad.
+
+
+**connect usb debug port:**
+
+power on AIO with Battery connector(GH1.25* 6 pin), after the blue LED flashing, plug in usb cable and connect to PC
+
+in windows:
+
+go to control panel- internet -network:
+
+find a usb2.0 to fast Ethernet Adapter
+
+set this card ipv4 address to 192.168.1.11 mask:255.255.255.0
+
+apply
+
+then open ssh to connect AIO address:192.168.1.10
+
+user:root password:12345
+
+
+**RF section**
+
+Default Antenna is ANT1 for 1T1R, ANT0+ANT1 is 2T2R
+
+Reconmand RF setting 
+  
+  RF Power 1~30dbm
+  
+  MCS index 1,3(0-7 is 1T1R, 8+ is 2T2R)
+  
+  stbc=1,ldpc=1
+  
+  Video biterate:4096 /12688(mcs 3+)
+  
+**SD solt for Air camera record**
+
+on bench test or debug is disable the record function defaultly
+
+To enable the recording function set (record value)true in majestic.yaml
+
+**Todo**
+
+On board heat sink and cooling fan:
+
+USB only for debug mode
+
+Power limited 5W input.
+
+Extend connector
+