mirror of https://github.com/OpenIPC/wiki.git
Merge pull request #337 from thegroove/network-perversions-2
Network trouble on hi35xx rewrite and consolidationpull/339/head
Signor Pellegrino
GitHub
commit
793f09e644
|
|
@ -29,7 +29,6 @@ OpenIPC Wiki
|
|||
- [Network settings](en/network-settings.md)
|
||||
- [Adding a wifi driver to your firmware](en/adding-wifi-driver.md)
|
||||
- [Wireless settings](en/wireless-settings.md)
|
||||
- [Network perversions](en/network-perversions.md)
|
||||
- [System features](en/system-features.md)
|
||||
- [Majestic streamer](en/majestic-streamer.md)
|
||||
- [Web interface](en/web-interface.md)
|
||||
|
|
@ -57,7 +56,7 @@ OpenIPC Wiki
|
|||
|
||||
### Troubleshooting
|
||||
|
||||
- [Network does not work](en/trouble-network.md)
|
||||
- [Network does not work on hi35xx](en/trouble-network-hi35xx.md)
|
||||
- [Majestic does not work, camera reboots](en/trouble-majestic.md)
|
||||
- [Sigmastar unbrick instructions](en/sigmastar-unbrick.md)
|
||||
- [Ingenic T31 unbrick with SD card](en/ingenic-t31-unbrick-with-sd-card.md)
|
||||
|
|
|
|||
|
|
@ -1,47 +0,0 @@
|
|||
# OpenIPC Wiki
|
||||
[Table of Content](../README.md)
|
||||
|
||||
A collection of practical networking perversions
|
||||
------------------------------------------------
|
||||
|
||||
|
||||
### XiongMai, HI3518EV100
|
||||
On some cameras it's required to do the U-boot network configuration to get it to work in Linux
|
||||
```
|
||||
For U-boot network
|
||||
setenv phyaddru 1
|
||||
setenv phyaddrd 2
|
||||
setenv mdio_intf rmii
|
||||
saveenv
|
||||
|
||||
For Linux network
|
||||
setenv extras 'hieth.phyaddru=1 hieth.phyaddrd=2'; saveenv
|
||||
```
|
||||
|
||||
### CamHi/HiChip/Xin, HI3518EV200
|
||||
|
||||
```
|
||||
For U-boot network
|
||||
setenv phyaddru 0
|
||||
setenv phyaddrd 1
|
||||
saveenv
|
||||
```
|
||||
### HiWatch, HI3518CV100
|
||||
|
||||
```
|
||||
For U-boot network
|
||||
setenv phyaddru 3
|
||||
saveenv
|
||||
|
||||
For Linux network
|
||||
setenv extras 'hieth.phyaddru=3 hieth.mdioifu=0'
|
||||
saveenv
|
||||
```
|
||||
|
||||
### Harex (5013A-CF/5020A-FF), HI3516CV100
|
||||
|
||||
```
|
||||
For U-boot network
|
||||
setenv extras 'hieth.phyaddru=1 hieth.mdioifu=0'
|
||||
saveenv
|
||||
```
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
# OpenIPC Wiki
|
||||
[Table of Content](../README.md)
|
||||
|
||||
## Troubleshooting: Network does not work on hi35xx
|
||||
If network is not working on your hi35xx device after installing OpenIPC (no link), you may have to tune the MII (Media Independent Interface) settings.
|
||||
For U-Boot, this is done by setting values for `phyaddru`, `phyaddrd` and `mdio_intf`.
|
||||
Possible values for `phyaddru` and `phyaddrd` are: `0-3`, possible values for `mdio_intf` are: `rmii`, `rgmii`, `gmii`.
|
||||
For the Linux kernel / OS, values can be set through the `extras` boot variables `hieth.phyaddru`, `hieth.phyaddrd`, `hieth.mdioifu` and `hieth.mdioifd`.
|
||||
|
||||
Often the correct values can be found in your stock firmware. Viewing the boot logs or running [ipctool](https://github.com/OpenIPC/ipctool) on your stock firmware may provide clues.
|
||||
|
||||
Below are some combinations you can try:
|
||||
|
||||
### For ethernet in Linux:
|
||||
|
||||
In Linux console run this:
|
||||
```
|
||||
fw_setenv extras 'hieth.phyaddru=0 hieth.phyaddrd=1' && reboot
|
||||
```
|
||||
If the above settings did not work, try this instead:
|
||||
```
|
||||
fw_setenv extras 'hieth.phyaddru=1 hieth.phyaddrd=0' && reboot
|
||||
```
|
||||
Or:
|
||||
```
|
||||
fw_setenv extras 'hieth.mdioifu=0 hieth.mdioifd=0' && reboot
|
||||
```
|
||||
Or:
|
||||
```
|
||||
fw_setenv extras 'hieth.mdioifu=1 hieth.mdioifd=1' && reboot
|
||||
```
|
||||
Or:
|
||||
```
|
||||
fw_setenv extras hieth.mdioifu=0 hieth.mdioifd=0 hieth.phyaddru=1 hieth.phyaddrd=2 && reboot
|
||||
```
|
||||
Or:
|
||||
```
|
||||
fw_setenv extras hieth.phyaddru=3 hieth.mdioifu=0 && reboot
|
||||
```
|
||||
|
||||
*Note: if a certain combination causes your device to fail to boot, you can clear the variable(s) in the U-Boot prompt by calling `setenv <variable>`, i.e. set the variable using an empty argument, followed by `saveenv`.*
|
||||
|
||||
### For ethernet in U-boot:
|
||||
|
||||
Set `phyaddru` and `phyaddrd` variables from U-Boot console:
|
||||
```
|
||||
setenv phyaddru 0; setenv phyaddrd 1; saveenv; reset
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
setenv phyaddru 1; setenv phyaddrd 0; saveenv; reset
|
||||
```
|
||||
Or:
|
||||
```
|
||||
setenv phyaddru 0; setenv phyaddrd 0; saveenv; reset
|
||||
```
|
||||
Or:
|
||||
```
|
||||
setenv phyaddru 1; setenv phyaddrd 1; saveenv; reset
|
||||
```
|
||||
|
||||
*Note: to initialize and test network connectivity in U-Boot, the `ping` command can be used.*
|
||||
|
||||
Some known combinations for specific boards:
|
||||
|
||||
### XiongMai, HI3518EV100
|
||||
*For U-boot network:*
|
||||
```
|
||||
setenv phyaddru 1
|
||||
setenv phyaddrd 2
|
||||
setenv mdio_intf rmii
|
||||
saveenv
|
||||
```
|
||||
*For Linux network:*
|
||||
```
|
||||
setenv extras 'hieth.phyaddru=1 hieth.phyaddrd=2'
|
||||
saveenv
|
||||
```
|
||||
|
||||
### XiongMai IPG-53H20AF, HI3516CV100
|
||||
|
||||
*For Linux network:*
|
||||
```
|
||||
setenv hieth.mdioifu=0 hieth.mdioifd=0 hieth.phyaddru=1 hieth.phyaddrd=2
|
||||
saveenv
|
||||
```
|
||||
|
||||
### CamHi/HiChip/Xin, HI3518EV200
|
||||
|
||||
*For U-boot network:*
|
||||
```
|
||||
setenv phyaddru 0
|
||||
setenv phyaddrd 1
|
||||
saveenv
|
||||
```
|
||||
|
||||
### HiWatch, HI3518CV100
|
||||
|
||||
*For U-boot network:*
|
||||
```
|
||||
setenv phyaddru 3
|
||||
saveenv
|
||||
```
|
||||
|
||||
*For Linux network:*
|
||||
```
|
||||
setenv extras 'hieth.phyaddru=3 hieth.mdioifu=0'
|
||||
saveenv
|
||||
```
|
||||
|
||||
### Harex (5013A-CF/5020A-FF), HI3516CV100
|
||||
|
||||
*For U-boot network:*
|
||||
```
|
||||
setenv extras 'hieth.phyaddru=1 hieth.mdioifu=0'
|
||||
saveenv
|
||||
```
|
||||
|
||||
If nothing of the above worked for you, please ask in [our Telegram channel](https://t.me/openipc).
|
||||
|
|
@ -1,47 +0,0 @@
|
|||
# OpenIPC Wiki
|
||||
[Table of Content](../README.md)
|
||||
|
||||
## Troubleshooting: Network does not work
|
||||
|
||||
Some IP-cameras require additional parameters set to make the network interface work.
|
||||
|
||||
### For recent firmware
|
||||
|
||||
Use `extras` boot variable. In Linux console run this
|
||||
```
|
||||
fw_setenv extras 'hieth.phyaddru=0 hieth.phyaddrd=1' && reboot
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
fw_setenv extras 'hieth.phyaddru=1 hieth.phyaddrd=0' && reboot
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
fw_setenv extras 'hieth.mdioifu=0 hieth.mdioifd=0' && reboot
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
fw_setenv extras 'hieth.mdioifu=1 hieth.mdioifd=1' && reboot
|
||||
```
|
||||
If nothing of the above worked for you, seek help on [our Telegram channel](https://t.me/openipc).
|
||||
|
||||
|
||||
### For older firmware
|
||||
|
||||
Set `phyaddru` and `phyaddrd` variables from U-Boot console:
|
||||
```
|
||||
setenv phyaddru 0; setenv phyaddrd 1; saveenv; reset
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
setenv phyaddru 1; setenv phyaddrd 0; saveenv; reset
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
setenv phyaddru 0; setenv phyaddrd 0; saveenv; reset
|
||||
```
|
||||
If the above settings did not work, try this instead
|
||||
```
|
||||
setenv phyaddru 1; setenv phyaddrd 1; saveenv; reset
|
||||
```
|
||||
If nothing of the above worked for you, seek help on [our Telegram channel](https://t.me/openipc).
|
||||
Loading…
Reference in New Issue