OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity

Update fpv-runcam-wifilink-openipc.md

pull/417/head
wkumik 2024-10-08 23:08:05 +02:00 committed by GitHub
parent d518849779
commit 3948218f0a
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 17 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
en/fpv-runcam-wifilink-openipc.md
View File

@ -53,9 +53,11 @@ Note:
if you are using a different FC then in this example, you might if you are using a different FC then in this example, you might
need to chose a different need to chose a different
UART. UART.
![msp DISPLAY PORT](https://github.com/wkumik/wiki/blob/master/images/RUNCAM%20SETUP%20GUIDE%20IMAGES/image6.png)
c) In the configuration tab, make sure Telemetry and OSD are enabled c) In the configuration tab, make sure Telemetry and OSD are enabled
![Telemetry](https://github.com/wkumik/wiki/blob/master/images/RUNCAM%20SETUP%20GUIDE%20IMAGES/image5.png)
Set up OSD in OSD tab. Enable and arrange all the information as Set up OSD in OSD tab. Enable and arrange all the information as
you wish. Set Video Format to AVATAR. you wish. Set Video Format to AVATAR.
@ -79,11 +81,11 @@ OpenIPC configurator is a useful tool to change many different settings
on your camera that runs OpenIPC firmware. on your camera that runs OpenIPC firmware.
a) Download and install the latest version of a) Download and install the latest version of
> [[Putty]{.underline}](https://www.chiark.greenend.org.uk/~sgtatham/putty/) [PUTTY](https://www.chiark.greenend.org.uk/~sgtatham/putty/)
b) Download the [[OpenIPC b) Download the [OpenIPC
> configurator]{.underline}](https://github.com/OpenIPC/configurator/releases) configurator](https://github.com/OpenIPC/configurator/releases)
> and install it and install it
c) Setting up IP\ c) Setting up IP\
> -Connect your runcam to your computer's Ethernet port with the > -Connect your runcam to your computer's Ethernet port with the
@ -93,14 +95,12 @@ c) Setting up IP\
> - Select change adapter settings\ > - Select change adapter settings\
> - double click on Internet Protocol Version 4\ > - double click on Internet Protocol Version 4\
> - Enter numbers as per image below\ > - Enter numbers as per image below\
> ![](vertopal_01220b0926f54aebbf39e69ed3249f76/media/image4.png){width="4.0625in" ![IP address](https://github.com/wkumik/wiki/blob/master/images/RUNCAM%20SETUP%20GUIDE%20IMAGES/image4.png)
> height="4.729166666666667in"}
d) On the configurator, enter IP address: 192.168.1.10 and press d) On the configurator, enter IP address: 192.168.1.10 and press
> connect > connect
e) Refer to [[this e) Refer to separate wiki document
Readme]{.underline}](https://github.com/OpenIPC/configurator/blob/master/README-manual.md)
for setting up OSD for setting up OSD
f) Set up all the settings. There are too many to go through them all f) Set up all the settings. There are too many to go through them all
@ -108,8 +108,8 @@ f) Set up all the settings. There are too many to go through them all
## 5. Android Ground station ## 5. Android Ground station
a) Download [[Pixel Pilot a) Download [Pixel Pilot
Apk]{.underline}](https://github.com/OpenIPC/PixelPilot/releases) Apk](https://github.com/OpenIPC/PixelPilot/releases)
file from github, straight into your phone. file from github, straight into your phone.
b) Go into Android file browser, find that file and install it. b) Go into Android file browser, find that file and install it.
@ -162,8 +162,8 @@ If you prefer the cable on the bottom, do the following steps:
## Adding audio ## Adding audio
1) Make sure you have the latest Pixel 1) Make sure you have the latest [Pixel
pilot installed] (https://github.com/OpenIPC/PixelPilot/releases) pilot installed](https://github.com/OpenIPC/PixelPilot/releases)
2) Install Win SCP to connect to your camera 2) Install Win SCP to connect to your camera
@ -172,8 +172,7 @@ If you prefer the cable on the bottom, do the following steps:
> battery or a 12V power source > battery or a 12V power source
4) Open WinSCP and connect to your camera 4) Open WinSCP and connect to your camera
> ![](vertopal_01220b0926f54aebbf39e69ed3249f76/media/image2.png){width="6.708333333333333in" ![WinSCP](https://github.com/wkumik/wiki/blob/master/images/RUNCAM%20SETUP%20GUIDE%20IMAGES/image2.png)
> height="4.583333333333333in"}
5) Go to: etc folder 5) Go to: etc folder
@ -181,12 +180,12 @@ If you prefer the cable on the bottom, do the following steps:
7) Scroll down and make sure 'audio' section is as below. You can just 7) Scroll down and make sure 'audio' section is as below. You can just
edit it like a text file. edit it like a text file.
> ![](vertopal_01220b0926f54aebbf39e69ed3249f76/media/image3.png){width="2.4270833333333335in"
> height="1.3333333333333333in"}
8) Save the file and close the winscp ![AUDIO](https://github.com/wkumik/wiki/blob/master/images/RUNCAM%20SETUP%20GUIDE%20IMAGES/image3.png)
9) Test if audio in pixel pilot app works. 9) Save the file and close the winscp
10) Test if audio in pixel pilot app works.
At the time of writing this Audio works, but it's not being At the time of writing this Audio works, but it's not being
recorded in the mp4 file. recorded in the mp4 file.