Update and rename fpv-how-to-build-openipc-with-8812eu-driver to fpv-how-to-build-openipc-with-8812eu-driver.md

en/fpv-how-to-build-openipc-with-8812eu-driver

@@ -1,40 +0,0 @@
-More details about rtl8812eu can be found here https://github.com/OpenIPC/wiki/blob/master/en/fpv-bl-m8812eu2-wifi-adaptors.md
-
-how-to-build-openipc-with-8812eu-driver
-
-Boot into Ubuntu
-Open Terminal
-
-sudo apt-get install -y automake autotools-dev bc build-essential curl fzf git libtool rsync unzip
-
-rm -r -f yourOpenipc #remove any old firmware build directory (optional)
-git clone --depth=1 https://github.com/OpenIPC/firmware.git yourOpenipc
-cd yourOpenipc
-make clean
-cd br-ext-chip-sigmastar
-cd configs
-ls
-sudo nano yourSelectconfig
-
-	Then under Wireless add the line 
-BR2_PACKAGE_RTL88X2EU_OPENIPC=y
-	Save the file
-
-cd ..
-cd ..
-make
-
-	Select your board and type eg ssc338q fpv and build the firmware
-	
-
-
-Navigate to /home/YourUser/yourOpenipc/output/images
-Find your appropriate output .tgz archive ie openipc.ssc338q-nor-fpv.tgz and extract the rootfs and uboot files
-Copy those 2 files to the OpenIPC camera /tmp
-ssh to the camera
-
-cd /tmp
-
-sysupgrade --kernel=uImage.ssc338q --rootfs=rootfs.squashfs.ssc338q
-or
-sysupgrade --kernel=uImage.ssc30kq --rootfs=rootfs.squashfs.ssc30kq

en/fpv-how-to-build-openipc-with-8812eu-driver.md

@@ -0,0 +1,46 @@
+# OpenIPC Wiki
+[Table of contents](../README.md)
+
+How to build OpenIPC with RTL8812EU driver
+--------------------------------
+
+More details about rtl8812eu can be found here https://github.com/OpenIPC/wiki/blob/master/en/fpv-bl-m8812eu2-wifi-adaptors.md
+
+- Boot into Ubuntu
+- Open Terminal
+
+```
+sudo apt-get install -y automake autotools-dev bc build-essential curl fzf git libtool rsync unzip
+```
+
+```
+rm -r -f yourOpenipc #remove any old firmware build directory (optional)
+git clone --depth=1 https://github.com/OpenIPC/firmware.git yourOpenipc
+cd yourOpenipc
+make clean
+cd br-ext-chip-sigmastar
+cd configs
+ls
+sudo nano yourSelectconfig
+```
+
+```
+	Then under Wireless add the line 
+BR2_PACKAGE_RTL88X2EU_OPENIPC=y
+	Save the file
+
+cd ..
+cd ..
+make
+```
+
+- Select your board and type eg ssc338q fpv and build the firmware
+- Navigate to /home/YourUser/yourOpenipc/output/images
+- Find your appropriate output .tgz archive ie openipc.ssc338q-nor-fpv.tgz and extract the rootfs and uboot files
+- Copy those 2 files to the OpenIPC camera /tmp
+    - ssh to the camera
+`cd /tmp`
+
+`sysupgrade --kernel=uImage.ssc338q --rootfs=rootfs.squashfs.ssc338q`
+or
+`sysupgrade --kernel=uImage.ssc30kq --rootfs=rootfs.squashfs.ssc30kq`