OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity

Change telegram link's to site

master
Igor Zalatov 2025-08-10 20:44:03 +01:00
parent 9a836706db
commit 1afe86dd47
9 changed files with 19 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -166,7 +166,7 @@ OpenIPC Wiki
- [Releases in Telegram](https://t.me/s/openipc_dev)
- [OpenCollective](https://opencollective.com/openipc)
- [Twitter](https://twitter.com/OpenIPC)
- [Telegram](https://t.me/openipc)
- [Telegram](https://openipc.org/our-channels)
### Roadmap

2
en/device-smartwares-cip-37210.md
View File

@ -141,7 +141,7 @@ Erasing at 0x1000000 -- 100% complete.
Writing at 0x1000000 -- 100% complete.
```
It anything goes wrong here, don't power off the device and ask the mentioned [Telegram group](https://t.me/openipc) for help! Otherwise enter `reset` and get into the freshly flashed u-boot by hitting any key to stop autoboot. Run the following command and you are done:
It anything goes wrong here, don't power off the device and ask the mentioned [Telegram group](https://openipc.org/our-channels) for help! Otherwise enter `reset` and get into the freshly flashed u-boot by hitting any key to stop autoboot. Run the following command and you are done:
```sh
run setnor16m
```

14
en/device-wyze-integration.md
View File

@ -11,13 +11,13 @@ This is where we'll be writing down our guide to flashing new devices and report
|-----------|-----------|----------------|-----------------------------------|----------|-----------------------|------------|-----------|-----------------------------------------------------------|
| WYZEC2 | | 2ANJHWYZEC2 | 2019-06-38 | T20X BGA | SDIO: Realtek 8189FTV | 2C:AA:8E | YES | https://gist.github.com/csev1755/e60abe15d8708e0d2b0a592e808b2022 |
| WYZECP1 | | 2ANJHHWYZECP1 | DF3-IFPM01 V1.4 | T20X BGA | SDIO: Realtek 8189ES | 2C:AA:8E | YES | |
| WYZEC3 | WYZEC3 | 2AUIUWYZEC3 | WYZEV3_T31GC2053 V1.4_20201010 | T31ZX | SDIO: Realtek 8189FTV | 7C:78:B2 | YES | https://t.me/openipc/49957 https://youtu.be/t7Nzo-KXTH0 |
| WYZEC3 | WYZEC3 | 2AUIUWYZEC3 | WYZEV3_T31GC2053 V1.4_20201010 | T31ZX | SDIO: Realtek 8189FTV | 7C:78:B2 | YES | https://youtu.be/t7Nzo-KXTH0 https://openipc.org/our-channels |
| WYZEC3 | WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V1.2_20200715 | T31X | SDIO: Realtek 8189FTV | 7C:78:B2 | YES | https://youtu.be/jm4wze_HY78 |
| WYZEC3 | WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V2.02_20210523 | T31ZX | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://t.me/openipc/49049 https://t.me/openipc/49050 |
| WYZEC3 | WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V2.03_20211206 | T31X | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://t.me/openipc/45444 https://t.me/openipc/48942 |
| WYZEC3 | WYZEC3B | 2AUIUWYZEC3B | WYZEV3_T31GC2053 V2.02_20210523 | T31ZX | SDIO: Realtek 8189FTV | D0:3F:27 | YES | https://t.me/openipc/38728 https://t.me/openipc/38753 |
| WYZEC3 | WYZEC3B | 2AUIUWYZEC3B | WYZEV3_T31GC2053 V2.03_20211206 | T31X | SDIO: Realtek 8189FTV | D0:3F:27 | YES | https://t.me/openipc/76036 |
| WYZEC3 | WYZEC3F | 2AUIUWYZEC3F | WYZEV3_T31AGC2053 V3.2_20210714 | T31A BGA | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://t.me/openipc/43299 https://t.me/openipc/38755 https://t.me/openipc/38757 |
| WYZEC3 | WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V2.02_20210523 | T31ZX | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://openipc.org/our-channels |
| WYZEC3 | WYZEC3A | 2AUIUWYZEC3A | WYZEV3_T31GC2053 V2.03_20211206 | T31X | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://openipc.org/our-channels |
| WYZEC3 | WYZEC3B | 2AUIUWYZEC3B | WYZEV3_T31GC2053 V2.02_20210523 | T31ZX | SDIO: Realtek 8189FTV | D0:3F:27 | YES | https://openipc.org/our-channels |
| WYZEC3 | WYZEC3B | 2AUIUWYZEC3B | WYZEV3_T31GC2053 V2.03_20211206 | T31X | SDIO: Realtek 8189FTV | D0:3F:27 | YES | https://openipc.org/our-channels |
| WYZEC3 | WYZEC3F | 2AUIUWYZEC3F | WYZEV3_T31AGC2053 V3.2_20210714 | T31A BGA | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://openipc.org/our-channels |
| WYZEC3 | WYZEC3F | 2AUIUWYZEC3F | WYZEV3_T31AGC2053 V3.2_20210714 | T31A BGA | SDIO: AltoBeam 6031 | D0:3F:27 | YES | https://youtu.be/VkqX9yg0odU |
| WVDBV1 | WVDB1A | 2AUIUWVDB1A | WYZEDB3_MB_T31_2.2 | T31X | SDIO: Realtek 8189FTV | 7C:78:B2 | YES | |
| WYZECP2 | WYZECP2A | 2AUIUWYZECP2 | DF3-MCU-S01-V2.2 | T31X | SDIO: AltoBeam 6031 | 7C:78:B2 | YES | |
@ -69,4 +69,4 @@ MOTORS:
* ~~Exposure does not work well https://github.com/OpenIPC/majestic/issues/102~~
* ~~SD card does not work in the U-Boot (power is available)~~ fixed
* ~~Problem with loading u-boot from an microSD card. It doesn't reach the promt. Not only on wyze v3 (https://t.me/openipc_modding/179369), but also on another board T31L (https://t.me/openipc/47739). Most likely it will be IMPOSSIBLE, because in the camera there is a microSD power management MOSFET, which must be turned on BEFORE booting from the card (the experiment with not fully loaded u-boot was possible due to direct power supply to the microSD card, bypassing the transistor). Please confirm my version if it is not possible otherwise.~~ impossible without modification (direct 3.3V power supply to the microSD card reader)
* ~~Problem with loading u-boot from an microSD card. It doesn't reach the promt. Not only on wyze v3 (https://openipc.org/our-channels), but also on another board T31L (https://openipc.org/our-channels). Most likely it will be IMPOSSIBLE, because in the camera there is a microSD power management MOSFET, which must be turned on BEFORE booting from the card (the experiment with not fully loaded u-boot was possible due to direct power supply to the microSD card, bypassing the transistor). Please confirm my version if it is not possible otherwise.~~ impossible without modification (direct 3.3V power supply to the microSD card reader)

6
en/fpv.md
View File

@ -56,7 +56,7 @@ While working with this technology, the idea of simplifying the flight system an
* Reduces overall consumption and increases system reliability by simplifying the circuitry
* Reduces video latency: in our Glass-to-Glass tests, we got about 80ms latency for 1080p@60 (on mid-budget cameras), and about 60 ms for 720p@60 and about 100 ms for 1080p@30 (for the most budget cameras).
* There is a possibility of tuning hardware encoder, for example, more frequent formation of I frame (the specifics depend on the vendor of IP camera)
* The community has accumulated a lot of experience in [repairing IP cameras](https://t.me/ExIPCam), which makes it possible to further reduce the cost of operation of the system.
* The community has accumulated a lot of experience in [repairing IP cameras](https://openipc.org/our-channels), which makes it possible to further reduce the cost of operation of the system.
### Disadvantages
@ -298,7 +298,7 @@ Unfortunately, to get a WDR image the whole system must work at least twice as f
#### Can I use an LTE adapter instead of WiFi?
Yes, but firmware modification will be required. We recommend that you ask questions about adapting specific hardware [in the official group](https://t.me/openipc_modding).
Yes, but firmware modification will be required. We recommend that you ask questions about adapting specific hardware [in the official group](https://openipc.org/our-channels).
#### Can I connect SD card for video recording?
@ -363,7 +363,7 @@ Our team has extensive experience in low latency media transmission (some projec
- https://github.com/openipc/sandbox-fpv
- https://github.com/OpenIPC/silicon_research
- [OpenIPC for building FPV systems, chat in telegram messenger](https://t.me/+BMyMoolVOpkzNWUy)
- [OpenIPC for building FPV systems, chat in telegram messenger](https://openipc.org/our-channels)
- [WFB-ng Data Transport Standard (Draft)](https://github.com/svpcom/wfb-ng/blob/master/doc/wfb-ng-std-draft.md)
**And our general resources:**

4
en/help-uboot.md
View File

@ -339,7 +339,7 @@ The first thing to do is locate the flash memory chip on the camera circuit
board. Typically this is a square chip with 8 pins labeled 25Q64 or 25Q128,
rarely 25L64 or 25L128. If you have trouble locating the chip, try taking
some pictures of your board from both sides. Then ask for help
[in our Telegram channel](https://t.me/openipc).
[in our Telegram channel](https://openipc.org/our-channels).
__Do not try to short-circuit any random chip! It will most likely burn your camera circuit.__
Short-circuit pins 5 and 6 of the flash chip with a small metal object,
@ -401,4 +401,4 @@ root@openipc-hi3518ev100:~# fw_setenv uk 'mw.b ${baseaddr} 0xff ${flashsize}; tf
```
[burn]: https://github.com/OpenIPC/burn
[telegram]: https://t.me/OpenIPC
[telegram]: https://openipc.org/our-channels

2
en/ingenic-cloner-guide.md
View File

@ -11,7 +11,7 @@ The first thing to do is locate the flash memory chip on the camera circuit
board. Typically this is a square chip with 8 pins labeled 25Q64 or 25Q128,
rarely 25L64 or 25L128. If you have trouble locating the chip, try taking
some pictures of your board from both sides. Then ask for help
[in our Telegram channel](https://t.me/openipc).
[in our Telegram channel](https://openipc.org/our-channels).
__Do not try to short-circuit any random chip! It will most likely burn your camera circuit.__
Short-circuit pins 5 and 6 of the flash chip with a small metal object,

16
en/menu-index.md
View File

@ -18,26 +18,14 @@ We would be grateful for any feedback and suggestions.
## Official links
* [OpenIPC on Wiki](https://github.com/openipc/wiki) - Collection of various documentation and instructions.
* [OpenIPC on GitHub](https://github.com/OpenIPC/) - GitHub organization, most projects are hosted here.
* [OpenIPC on Telegram](https://openipc.org/our-channels) - Discussions, experiments and technical support..
* [OpenIPC on Wiki](https://github.com/openipc/wiki) - Collection of various documentation and instructions.
* [OpenIPC on OpenCollective](https://opencollective.com/openipc) - OpenCollective community.
* [OpenIPC on Twitter](https://twitter.com/openipc) - Our main news.
* [OpenIPC on YouTube](https://www.youtube.com/channel/UCaXlbR2uGTRFh8jQ2lCFd2g) - Our instructions and streams (in the plans).
## Telegram chat groups
* [OpenIPC](https://t.me/openipc) (EN) - International channel to discuss the development of our project, [*](https://combot.org/c/1166652144)
* [OpenIPC modding](https://t.me/openipc_modding) (RU) - general issues on modifying IPCam device firmware, [*](https://combot.org/c/-1001247643198)
* [OpenIPC development](https://t.me/openipc_software) (RU) - HiSilicon, XM porting in OpenWrt and programmer issues, [*](https://combot.org/c/-1001196905312)
* [OpenIPC advice](https://t.me/openipc_advice) (RU) - problems, finding solutions, long conversations, [*](https://combot.org/c/1385065634)
* [OpenIPC Iranian](https://t.me/joinchat/T_GwQUBTJdfXJrFb) (IR) - special group for Iranian users / تیم OpenIPC برای کاربران ایرانی, [*](https://combot.org/c/-1001341239361)
* [OpenIPC demo](https://t.me/openipc_demo) (EN/RU) - test bot with buttons, after connecting, give the "/menu", [*](https://combot.org/c/1414887196)
* [OpenIPC ExIPCam](https://t.me/ExIPCam) (RU) - ExIPCam program and hardware/software repairing devices, [*](https://combot.org/c/1213889378)
* [OpenIPC updates](https://t.me/s/openipc_updates) (RU) - Firmware & Software updates information channel
* [OpenIPC dev](https://t.me/s/openipc_dev) - Firmware & Software development channel
## Team developments
### Firmware

2
en/source-code.md
View File

@ -13,7 +13,7 @@
This document serves as a comprehensive guide for developers looking to contribute to the OpenIPC firmware, including how to build from sources, understand the project's structure, modify, and add new packages, as well as instructions for installing the firmware on devices.
We are continuously working towards creating a high-quality source code repository. Your patience is appreciated as we strive to deliver a fully polished and ready-to-use project and welcome your thoughts and feedback through the [OpenIPC telegram channel](https://t.me/openipc/117235)
We are continuously working towards creating a high-quality source code repository. Your patience is appreciated as we strive to deliver a fully polished and ready-to-use project and welcome your thoughts and feedback through the [OpenIPC telegram channel](https://openipc.org/our-channels)
## Building from Sources

2
ru/user-notes-melcor.md
View File

@ -74,4 +74,4 @@ reset
После загрузки, выполнить `firstboot` в консоли Putty.
[t1]: https://t.me/openipc_modding
[t1]: https://openipc.org/our-channels