OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity

Merge pull request #338 from cat101/master 

Updated instruction for Smartwares CIP-37210
pull/339/head
Signor Pellegrino 2024-03-12 00:37:13 +03:00 committed by GitHub
parent 793f09e644 d2c887ee59
commit 1a524c6e9d
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 50 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
en/device-smartwares-cip-37210.md
View File

@ -104,7 +104,7 @@ sudo kill 230002
``` ```
Power off the camera and also disconnect and reconnect your USB to TTL adapter. Now enter the following command and power on the camera: Power off the camera and also disconnect and reconnect your USB to TTL adapter. Now enter the following command and power on the camera:
```sh ```sh
./burn --chip hi3518ev200 --file=./uboot/u-boot-hi3518ev200-universal.bin --break; screen -L /dev/ttyUSB0 115200 ./burn --chip hi3518ev200 --file=./u-boot/u-boot-hi3518ev200-universal.bin --break && screen -L /dev/ttyUSB0 115200
``` ```
Hit any key to stop autoboot and you are greeted by the OpenIPC u-boot shell! Hit any key to stop autoboot and you are greeted by the OpenIPC u-boot shell!
```sh ```sh
@ -145,7 +145,7 @@ It anything goes wrong here, don't power off the device and ask the mentioned [T
```sh ```sh
run setnor16m run setnor16m
``` ```
Now it's time for another reboot, so enter `reset` again and you'll be greeted like this: Now remove the SD cards and reboot, by entering `reset` again and you'll be greeted like this:
```text ```text
Welcome to OpenIPC Welcome to OpenIPC
openipc-hi3518ev200 login: root openipc-hi3518ev200 login: root
@ -172,51 +172,81 @@ openipc-hi3518ev200 login: root
Please visit https://openipc.org/sponsor/ to learn more. Thank you. Please visit https://openipc.org/sponsor/ to learn more. Thank you.
``` ```
There is no root password set, so don't forget to set it with `passwd` after the first login! The root password is `12345`. Don't forget to change it with `passwd` after the first login!
If you are struggling with this tutorial and still want to try OpenIPC on a Smartwares CIP-37210, you can [buy it with OpenIPC v2.2 firmware pre-installed at open collective](https://opencollective.com/openipc/contribute/wifi-camera-showme-by-openipc-44355). If you are struggling with this tutorial and still want to try OpenIPC on a Smartwares CIP-37210, you can [buy it with OpenIPC v2.2 firmware pre-installed at open collective](https://opencollective.com/openipc/contribute/wifi-camera-showme-by-openipc-44355).
## Connecting to wifi ## Connecting to wifi
Now it's time to connect the camera to your 2.4 GHz Wi-Fi network. First of all, make sure that the firmware environment variables are set correctly. This is necessary so that `udhcpc` gets a DNS lease (because it is requesting `$ipaddr`) and the gateway is set correctly. Now it's time to connect the camera to your 2.4 GHz Wi-Fi network. First of all, make sure that the firmware environment variables are set correctly.
First set the network driver:
```sh ```sh
fw_printenv ipaddr fw_setenv wlandev rtl8188fu-generic
fw_printenv gatewayip
fw_printenv netmask
``` ```
Set the correct values according to your needs, for example:
Then the correct values according to your needs, for example:
```sh ```sh
fw_setenv ipaddr 10.42.42.42 fw_setenv wlanssid guest
fw_setenv wlanpass guest-password
``` ```
You can check the settings as folows:
```sh
fw_printenv wlandev
fw_printenv wlanssid
fw_printenv wlanpass
```
The last step is to configure the wlan0 interface: The last step is to configure the wlan0 interface:
```sh ```sh
vi /etc/network/interfaces cat <<EOF > /etc/network/interfaces.d/wlan0
```
Delete or outcomment the eth0 block, the device doesn't have ethernet and the auto setting will slow down boot. Add the following lines to your interfaces file, alter your SSID and password accordingly.
```text
auto wlan0 auto wlan0
iface wlan0 inet dhcp iface wlan0 inet dhcp
pre-up echo 3 > /sys/class/gpio/export pre-up echo 3 > /sys/class/gpio/export
pre-up echo out > /sys/class/gpio/gpio3/direction pre-up echo out > /sys/class/gpio/gpio3/direction
pre-up echo 1 > /sys/class/gpio/gpio3/value pre-up echo 1 > /sys/class/gpio/gpio3/value # GPIO3 is the WIFI power
pre-up modprobe mac80211 pre-up modprobe mac80211
pre-up sleep 1 pre-up sleep 1
pre-up insmod /lib/modules/4.9.37/extra/rtl8188fu.ko pre-up modprobe 8188fu
pre-up sleep 1 pre-up sleep 1
pre-up wpa_passphrase "YOUR_WIFI_SSID" "YOUR_PASSWORD" >/tmp/wpa_supplicant.conf pre-up wpa_passphrase "\$(fw_printenv -n wlanssid)" "\$(fw_printenv -n wlanpass)" > /tmp/wpa_supplicant.conf
pre-up sed -i '2i \\tscan_ssid=1' /tmp/wpa_supplicant.conf pre-up sed -i 's/#psk.*/scan_ssid=1/g' /tmp/wpa_supplicant.conf
pre-up ifconfig wlan0 up pre-up ifconfig wlan0 up
pre-up wpa_supplicant -B -Dnl80211 -iwlan0 -c/tmp/wpa_supplicant.conf pre-up wpa_supplicant -B -i wlan0 -D nl80211,wext -c /tmp/wpa_supplicant.conf
pre-up sleep 3 pre-up sleep 3
post-down killall -q wpa_supplicant post-down killall -q wpa_supplicant
post-down echo 0 > /sys/class/gpio/gpio3/value post-down echo 0 > /sys/class/gpio/gpio3/value
post-down echo 3 > /sys/class/gpio/unexport post-down echo 3 > /sys/class/gpio/unexport
EOF
``` ```
No it's time to check whether it's working: Now it's time to check whether it's working:
```sh ```sh
ifup wlan0 ifup wlan0
ip addr ip addr
``` ```
Check whether you can ping and ssh into the camera. Reboot and check, if the camera connects automatically to your wifi network. Reassamble the camera, now it's time so say goodbye to UART and use ssh and the web interface. (The credentials are root and the password you set earlier.) Check whether you can ping and ssh into the camera. Reboot and check, if the camera connects automatically to your wifi network. Reassamble the camera, now it's time so say goodbye to UART and use ssh and the web interface. (The credentials are root and the password you set earlier.)
Finally, you should look at `/etc/majestic.yaml` and in particular set this sections as follows in order to have a correct GPIO mapping for nighmode and audio.
```yaml
audio:
enabled: true
volume: 70
srate: 8000
codec: alaw
outputEnabled: true
outputVolume: 30
speakerPin: 51
speakerPinInvert: true
nightMode:
enabled: true
irSensorPin: 62
irSensorPinInvert: true
irCutPin1: 64
backlightPin: 63
dncDelay: 30
nightAPI: true
irCutSingleInvert: false
```