Merge branch 'master' of github:OpenIPC/firmware

br-ext-chip-hisilicon/Config.in

@@ -7,6 +7,7 @@ source "$BR2_EXTERNAL_HISILICON_PATH/package/fwprintenv-openipc/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/gdbserver-lite/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/hisi_gpio/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/hisilicon-opensdk/Config.in"
+source "$BR2_EXTERNAL_HISILICON_PATH/package/hisilicon-osdrv-hi3516av100/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/hisilicon-osdrv-hi3516cv200/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/hisilicon-osdrv-hi3516cv300/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/hisilicon-osdrv-hi3516cv500/Config.in"
@@ -19,6 +20,7 @@ source "$BR2_EXTERNAL_HISILICON_PATH/package/libhv-openipc/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/libogg-openipc/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/libsrt-openipc/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/majestic-fonts/Config.in"
+source "$BR2_EXTERNAL_HISILICON_PATH/package/majestic-hi3516av100/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/majestic-hi3516cv200/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/majestic-hi3516cv300/Config.in"
 source "$BR2_EXTERNAL_HISILICON_PATH/package/majestic-hi3516cv500/Config.in"

br-ext-chip-hisilicon/board/hi3516av100/kernel/hi3516av100.generic.config

@@ -127,7 +127,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_RD_XZ=y
+# CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 CONFIG_RD_LZ4=y
 CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
@@ -143,7 +143,6 @@ CONFIG_MULTIUSER=y
 CONFIG_SYSFS_SYSCALL=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
 CONFIG_KALLSYMS_BASE_RELATIVE=y
 CONFIG_PRINTK=y
@@ -627,25 +626,18 @@ CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IP_TUNNEL is not set
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
+CONFIG_NET_IP_TUNNEL=y
+# CONFIG_IP_MROUTE is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_NET_UDP_TUNNEL is not set
-# CONFIG_NET_FOU is not set
+CONFIG_NET_UDP_TUNNEL=y
+CONFIG_NET_FOU=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -731,7 +723,6 @@ CONFIG_BQL=y
 # CONFIG_AF_RXRPC is not set
 # CONFIG_AF_KCM is not set
 # CONFIG_STREAM_PARSER is not set
-CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 CONFIG_WEXT_CORE=y
 CONFIG_WEXT_PROC=y
@@ -762,7 +753,7 @@ CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
 # CONFIG_CEPH_LIB is not set
 # CONFIG_NFC is not set
 # CONFIG_LWTUNNEL is not set
-# CONFIG_DST_CACHE is not set
+CONFIG_DST_CACHE=y
 # CONFIG_NET_DEVLINK is not set
 CONFIG_MAY_USE_DEVLINK=y
 CONFIG_HAVE_CBPF_JIT=y
@@ -775,8 +766,7 @@ CONFIG_ARM_AMBA=y
 #
 # Generic Driver Options
 #
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+# CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_STANDALONE=y
@@ -786,11 +776,10 @@ CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
 # CONFIG_DMA_SHARED_BUFFER is not set
 
 #
@@ -874,9 +863,10 @@ CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_MT81xx_NOR is not set
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
 # CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_HISI_SFC is not set
+CONFIG_SPI_HISI_SFC=y
 CONFIG_MTD_SPI_IDS=y
 CONFIG_CLOSE_SPI_8PIN_4IO=y
+CONFIG_HISI_SPI_BLOCK_PROTECT=y
 CONFIG_MTD_HISFC350=y
 CONFIG_HISFC350_SYSCTRL_ADDRESS=0x20030000
 CONFIG_HISFC350_CHIP_NUM=2
@@ -884,13 +874,8 @@ CONFIG_HISFC350_CHIP_NUM=2
 # CONFIG_HISFC350_ENABLE_CHIPSELECT_0 is not set
 CONFIG_HISFC350_ENABLE_CHIPSELECT_1=y
 # CONFIG_HISFC350_ENABLE_INTR_DMA is not set
-CONFIG_CMD_SPI_BLOCK_PROTECTION=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_CMD_SPI_BLOCK_PROTECTION is not set
+# CONFIG_MTD_UBI is not set
 CONFIG_DTC=y
 CONFIG_OF=y
 # CONFIG_OF_UNITTEST is not set
@@ -1050,6 +1035,8 @@ CONFIG_NET_CORE=y
 # CONFIG_NET_TEAM is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_VXLAN is not set
+# CONFIG_GENEVE is not set
+# CONFIG_GTP is not set
 # CONFIG_MACSEC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -1157,7 +1144,7 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MICREL_KS8995MA is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_DRIVERS=m
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
@@ -1166,7 +1153,30 @@ CONFIG_USB_NET_DRIVERS=y
 # CONFIG_USB_LAN78XX is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_IPHETH is not set
-# CONFIG_WLAN is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+CONFIG_MT7601U=m
+CONFIG_WLAN_VENDOR_RALINK=y
+# CONFIG_RT2X00 is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+# CONFIG_RTL8187 is not set
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1187,92 +1197,20 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_BCM is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_BYD=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_CYPRESS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_FOCALTECH=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
+# CONFIG_INPUT_MISC is not set
 # CONFIG_RMI4_CORE is not set
 
 #
@@ -1395,7 +1333,6 @@ CONFIG_I2C_HISI=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
@@ -1447,7 +1384,6 @@ CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_GPIOLIB=y
 CONFIG_OF_GPIO=y
 CONFIG_GPIOLIB_IRQCHIP=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -1552,7 +1488,7 @@ CONFIG_BCMA_POSSIBLE=y
 #
 # Multifunction device drivers
 #
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_ACT8945A is not set
 # CONFIG_MFD_AS3711 is not set
 # CONFIG_MFD_AS3722 is not set
@@ -1576,7 +1512,7 @@ CONFIG_BCMA_POSSIBLE=y
 # CONFIG_MFD_MC13XXX_SPI is not set
 # CONFIG_MFD_MC13XXX_I2C is not set
 # CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_HISI_FMC is not set
+CONFIG_MFD_HISI_FMC=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_I2CPLD is not set
 # CONFIG_INTEL_SOC_PMIC is not set
@@ -1951,7 +1887,32 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_GADGET is not set
 # CONFIG_USB_ULPI_BUS is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_PWRSEQ_EMMC=y
+CONFIG_PWRSEQ_SIMPLE=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_HIMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -2108,15 +2069,15 @@ CONFIG_HAVE_ARM_SMCCC=y
 CONFIG_DCACHE_WORD_ACCESS=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS=m
 CONFIG_EXT4_USE_FOR_EXT2=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
 # CONFIG_EXT4_ENCRYPTION is not set
 # CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD2=y
+CONFIG_JBD2=m
 # CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_XFS_FS is not set
@@ -2124,7 +2085,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
-# CONFIG_F2FS_FS is not set
+CONFIG_F2FS_FS=m
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_FS_POSIX_ACL=y
+# CONFIG_F2FS_FS_SECURITY is not set
+# CONFIG_F2FS_CHECK_FS is not set
+# CONFIG_F2FS_FS_ENCRYPTION is not set
+# CONFIG_F2FS_FAULT_INJECTION is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_EXPORTFS=y
 # CONFIG_EXPORTFS_BLOCK_OPS is not set
@@ -2139,7 +2106,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTACTL is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
-# CONFIG_OVERLAY_FS is not set
+CONFIG_OVERLAY_FS=y
 
 #
 # Caches
@@ -2155,9 +2122,9 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_FAT_DEFAULT_UTF8 is not set
@@ -2187,19 +2154,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_TAGS_ECC is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BAD_BLOCK_MARKING is not set
-CONFIG_YAFFS_XATTR=y
+# CONFIG_YAFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -2211,13 +2166,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
 # CONFIG_LOGFS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
 CONFIG_SQUASHFS_FILE_CACHE=y
 # CONFIG_SQUASHFS_FILE_DIRECT is not set
@@ -2244,23 +2194,18 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V2=y
+# CONFIG_NFS_V2 is not set
 CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
 # CONFIG_NFSD is not set
 CONFIG_GRACE_PERIOD=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_DEBUG is not set
 # CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
@@ -2329,80 +2274,47 @@ CONFIG_NLS_UTF8=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_BOOT_PRINTK_DELAY is not set
 
 #
 # Compile-time checks and compiler options
 #
-# CONFIG_DEBUG_INFO is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_READABLE_ASM is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_PAGE_OWNER is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_SECTION_MISMATCH is not set
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KERNEL is not set
 
 #
 # Memory Debugging
 #
 # CONFIG_PAGE_EXTENSION is not set
 # CONFIG_PAGE_POISONING is not set
-# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_SHIRQ is not set
 
 #
 # Debug Lockups and Hangs
 #
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_WQ_WATCHDOG is not set
 # CONFIG_PANIC_ON_OOPS is not set
 CONFIG_PANIC_ON_OOPS_VALUE=0
 CONFIG_PANIC_TIMEOUT=0
-# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHED_INFO is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
 # CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_TIMER_STATS is not set
 
 #
 # Lock Debugging (spinlocks, mutexes, etc...)
 #
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
 CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 
 #
 # RCU Debugging
@@ -2410,15 +2322,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PROVE_RCU is not set
 # CONFIG_SPARSE_RCU_POINTER is not set
 # CONFIG_TORTURE_TEST is not set
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -2431,11 +2334,6 @@ CONFIG_TRACING_SUPPORT=y
 #
 # Runtime Testing
 #
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_PERCPU_TEST is not set
 # CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_TEST_HEXDUMP is not set
 # CONFIG_TEST_STRING_HELPERS is not set
@@ -2455,16 +2353,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_TEST_STATIC_KEYS is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
 # CONFIG_UBSAN is not set
 CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
 CONFIG_STRICT_DEVMEM=y
 # CONFIG_IO_STRICT_DEVMEM is not set
-# CONFIG_ARM_PTDUMP is not set
 # CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_LL is not set
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_UART_8250 is not set
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
@@ -2508,7 +2403,7 @@ CONFIG_CRYPTO_KPP2=y
 # CONFIG_CRYPTO_RSA is not set
 # CONFIG_CRYPTO_DH is not set
 # CONFIG_CRYPTO_ECDH is not set
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_USER is not set
 CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
@@ -2554,7 +2449,7 @@ CONFIG_CRYPTO_HMAC=m
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32 is not set
+CONFIG_CRYPTO_CRC32=m
 CONFIG_CRYPTO_CRCT10DIF=y
 CONFIG_CRYPTO_GHASH=m
 # CONFIG_CRYPTO_POLY1305 is not set
@@ -2666,7 +2561,6 @@ CONFIG_XZ_DEC_SPARC=y
 CONFIG_XZ_DEC_BCJ=y
 # CONFIG_XZ_DEC_TEST is not set
 CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_XZ=y
 CONFIG_DECOMPRESS_LZ4=y
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_ASSOCIATIVE_ARRAY=y
@@ -2679,7 +2573,6 @@ CONFIG_NLATTR=y
 # CONFIG_DDR is not set
 # CONFIG_IRQ_POLL is not set
 CONFIG_LIBFDT=y
-CONFIG_OID_REGISTRY=y
 # CONFIG_SG_SPLIT is not set
 CONFIG_SG_POOL=y
 CONFIG_ARCH_HAS_SG_CHAIN=y

br-ext-chip-hisilicon/board/hi3516av100/kernel/hi3516dv100.generic.config

@@ -127,7 +127,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_RD_XZ=y
+# CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 CONFIG_RD_LZ4=y
 CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
@@ -143,7 +143,6 @@ CONFIG_MULTIUSER=y
 CONFIG_SYSFS_SYSCALL=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
 CONFIG_KALLSYMS_BASE_RELATIVE=y
 CONFIG_PRINTK=y
@@ -627,25 +626,18 @@ CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IP_TUNNEL is not set
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
+CONFIG_NET_IP_TUNNEL=y
+# CONFIG_IP_MROUTE is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_NET_UDP_TUNNEL is not set
-# CONFIG_NET_FOU is not set
+CONFIG_NET_UDP_TUNNEL=y
+CONFIG_NET_FOU=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -731,7 +723,6 @@ CONFIG_BQL=y
 # CONFIG_AF_RXRPC is not set
 # CONFIG_AF_KCM is not set
 # CONFIG_STREAM_PARSER is not set
-CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 CONFIG_WEXT_CORE=y
 CONFIG_WEXT_PROC=y
@@ -762,7 +753,7 @@ CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
 # CONFIG_CEPH_LIB is not set
 # CONFIG_NFC is not set
 # CONFIG_LWTUNNEL is not set
-# CONFIG_DST_CACHE is not set
+CONFIG_DST_CACHE=y
 # CONFIG_NET_DEVLINK is not set
 CONFIG_MAY_USE_DEVLINK=y
 CONFIG_HAVE_CBPF_JIT=y
@@ -775,8 +766,7 @@ CONFIG_ARM_AMBA=y
 #
 # Generic Driver Options
 #
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+# CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_STANDALONE=y
@@ -786,11 +776,10 @@ CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
 # CONFIG_DMA_SHARED_BUFFER is not set
 
 #
@@ -874,9 +863,10 @@ CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_MT81xx_NOR is not set
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
 # CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_HISI_SFC is not set
+CONFIG_SPI_HISI_SFC=y
 CONFIG_MTD_SPI_IDS=y
 CONFIG_CLOSE_SPI_8PIN_4IO=y
+CONFIG_HISI_SPI_BLOCK_PROTECT=y
 CONFIG_MTD_HISFC350=y
 CONFIG_HISFC350_SYSCTRL_ADDRESS=0x20030000
 CONFIG_HISFC350_CHIP_NUM=2
@@ -884,13 +874,8 @@ CONFIG_HISFC350_CHIP_NUM=2
 # CONFIG_HISFC350_ENABLE_CHIPSELECT_0 is not set
 CONFIG_HISFC350_ENABLE_CHIPSELECT_1=y
 # CONFIG_HISFC350_ENABLE_INTR_DMA is not set
-CONFIG_CMD_SPI_BLOCK_PROTECTION=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_CMD_SPI_BLOCK_PROTECTION is not set
+# CONFIG_MTD_UBI is not set
 CONFIG_DTC=y
 CONFIG_OF=y
 # CONFIG_OF_UNITTEST is not set
@@ -1050,6 +1035,8 @@ CONFIG_NET_CORE=y
 # CONFIG_NET_TEAM is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_VXLAN is not set
+# CONFIG_GENEVE is not set
+# CONFIG_GTP is not set
 # CONFIG_MACSEC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -1157,7 +1144,7 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MICREL_KS8995MA is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_DRIVERS=m
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
@@ -1166,7 +1153,30 @@ CONFIG_USB_NET_DRIVERS=y
 # CONFIG_USB_LAN78XX is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_IPHETH is not set
-# CONFIG_WLAN is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+CONFIG_MT7601U=m
+CONFIG_WLAN_VENDOR_RALINK=y
+# CONFIG_RT2X00 is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+# CONFIG_RTL8187 is not set
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1187,92 +1197,20 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_BCM is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_BYD=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_CYPRESS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_FOCALTECH=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
+# CONFIG_INPUT_MISC is not set
 # CONFIG_RMI4_CORE is not set
 
 #
@@ -1395,7 +1333,6 @@ CONFIG_I2C_HISI=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
@@ -1447,7 +1384,6 @@ CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_GPIOLIB=y
 CONFIG_OF_GPIO=y
 CONFIG_GPIOLIB_IRQCHIP=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -1552,7 +1488,7 @@ CONFIG_BCMA_POSSIBLE=y
 #
 # Multifunction device drivers
 #
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_ACT8945A is not set
 # CONFIG_MFD_AS3711 is not set
 # CONFIG_MFD_AS3722 is not set
@@ -1576,7 +1512,7 @@ CONFIG_BCMA_POSSIBLE=y
 # CONFIG_MFD_MC13XXX_SPI is not set
 # CONFIG_MFD_MC13XXX_I2C is not set
 # CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_HISI_FMC is not set
+CONFIG_MFD_HISI_FMC=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_I2CPLD is not set
 # CONFIG_INTEL_SOC_PMIC is not set
@@ -1951,7 +1887,32 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_GADGET is not set
 # CONFIG_USB_ULPI_BUS is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_PWRSEQ_EMMC=y
+CONFIG_PWRSEQ_SIMPLE=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_HIMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -2108,15 +2069,15 @@ CONFIG_HAVE_ARM_SMCCC=y
 CONFIG_DCACHE_WORD_ACCESS=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS=m
 CONFIG_EXT4_USE_FOR_EXT2=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
 # CONFIG_EXT4_ENCRYPTION is not set
 # CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD2=y
+CONFIG_JBD2=m
 # CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_XFS_FS is not set
@@ -2124,7 +2085,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
-# CONFIG_F2FS_FS is not set
+CONFIG_F2FS_FS=m
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_FS_POSIX_ACL=y
+# CONFIG_F2FS_FS_SECURITY is not set
+# CONFIG_F2FS_CHECK_FS is not set
+# CONFIG_F2FS_FS_ENCRYPTION is not set
+# CONFIG_F2FS_FAULT_INJECTION is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_EXPORTFS=y
 # CONFIG_EXPORTFS_BLOCK_OPS is not set
@@ -2139,7 +2106,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTACTL is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
-# CONFIG_OVERLAY_FS is not set
+CONFIG_OVERLAY_FS=y
 
 #
 # Caches
@@ -2155,9 +2122,9 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_FAT_DEFAULT_UTF8 is not set
@@ -2187,19 +2154,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_TAGS_ECC is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BAD_BLOCK_MARKING is not set
-CONFIG_YAFFS_XATTR=y
+# CONFIG_YAFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -2211,13 +2166,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
 # CONFIG_LOGFS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
 CONFIG_SQUASHFS_FILE_CACHE=y
 # CONFIG_SQUASHFS_FILE_DIRECT is not set
@@ -2244,23 +2194,18 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V2=y
+# CONFIG_NFS_V2 is not set
 CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
 # CONFIG_NFSD is not set
 CONFIG_GRACE_PERIOD=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_DEBUG is not set
 # CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
@@ -2329,80 +2274,47 @@ CONFIG_NLS_UTF8=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_BOOT_PRINTK_DELAY is not set
 
 #
 # Compile-time checks and compiler options
 #
-# CONFIG_DEBUG_INFO is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_READABLE_ASM is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_PAGE_OWNER is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_SECTION_MISMATCH is not set
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KERNEL is not set
 
 #
 # Memory Debugging
 #
 # CONFIG_PAGE_EXTENSION is not set
 # CONFIG_PAGE_POISONING is not set
-# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_SHIRQ is not set
 
 #
 # Debug Lockups and Hangs
 #
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_WQ_WATCHDOG is not set
 # CONFIG_PANIC_ON_OOPS is not set
 CONFIG_PANIC_ON_OOPS_VALUE=0
 CONFIG_PANIC_TIMEOUT=0
-# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHED_INFO is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
 # CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_TIMER_STATS is not set
 
 #
 # Lock Debugging (spinlocks, mutexes, etc...)
 #
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
 CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 
 #
 # RCU Debugging
@@ -2410,15 +2322,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PROVE_RCU is not set
 # CONFIG_SPARSE_RCU_POINTER is not set
 # CONFIG_TORTURE_TEST is not set
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -2431,11 +2334,6 @@ CONFIG_TRACING_SUPPORT=y
 #
 # Runtime Testing
 #
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_PERCPU_TEST is not set
 # CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_TEST_HEXDUMP is not set
 # CONFIG_TEST_STRING_HELPERS is not set
@@ -2455,16 +2353,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_TEST_STATIC_KEYS is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
 # CONFIG_UBSAN is not set
 CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
 CONFIG_STRICT_DEVMEM=y
 # CONFIG_IO_STRICT_DEVMEM is not set
-# CONFIG_ARM_PTDUMP is not set
 # CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_LL is not set
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_UART_8250 is not set
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
@@ -2508,7 +2403,7 @@ CONFIG_CRYPTO_KPP2=y
 # CONFIG_CRYPTO_RSA is not set
 # CONFIG_CRYPTO_DH is not set
 # CONFIG_CRYPTO_ECDH is not set
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_USER is not set
 CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
@@ -2554,7 +2449,7 @@ CONFIG_CRYPTO_HMAC=m
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32 is not set
+CONFIG_CRYPTO_CRC32=m
 CONFIG_CRYPTO_CRCT10DIF=y
 CONFIG_CRYPTO_GHASH=m
 # CONFIG_CRYPTO_POLY1305 is not set
@@ -2666,7 +2561,6 @@ CONFIG_XZ_DEC_SPARC=y
 CONFIG_XZ_DEC_BCJ=y
 # CONFIG_XZ_DEC_TEST is not set
 CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_XZ=y
 CONFIG_DECOMPRESS_LZ4=y
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_ASSOCIATIVE_ARRAY=y
@@ -2679,7 +2573,6 @@ CONFIG_NLATTR=y
 # CONFIG_DDR is not set
 # CONFIG_IRQ_POLL is not set
 CONFIG_LIBFDT=y
-CONFIG_OID_REGISTRY=y
 # CONFIG_SG_SPLIT is not set
 CONFIG_SG_POOL=y
 CONFIG_ARCH_HAS_SG_CHAIN=y

br-ext-chip-hisilicon/board/hi3516av100/kernel/patches/10_add_xm25qh128_spi_nor.patch

@@ -0,0 +1,48 @@
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1021,6 +1021,23 @@
+ 	.erase_types[1]		= SNOR_OP_ERASE_4K(SPINOR_OP_BE_4K),
+ };
+ 
++static const struct spi_nor_basic_flash_parameter xmc_params = {
++	.rd_modes		= SNOR_RD_MODES,
++	.reads[SNOR_MIDX_SLOW]	= SNOR_OP_READ(0, 0, SPINOR_OP_READ),
++	.reads[SNOR_MIDX_1_1_1]	= SNOR_OP_READ(0, 8, SPINOR_OP_READ_FAST),
++	.reads[SNOR_MIDX_1_1_2]	= SNOR_OP_READ(0, 8, SPINOR_OP_READ_1_1_2),
++	.reads[SNOR_MIDX_1_2_2]	= SNOR_OP_READ(0, 8, SPINOR_OP_READ_1_2_2),
++	.reads[SNOR_MIDX_1_1_4]	= SNOR_OP_READ(0, 8, SPINOR_OP_READ_1_1_4),
++	.reads[SNOR_MIDX_1_4_4]	= SNOR_OP_READ(0, 24, SPINOR_OP_READ_1_4_4),
++
++	.wr_modes		= SNOR_WR_MODES,
++	.page_programs[SNOR_MIDX_1_1_1]	= SPINOR_OP_PP,
++	.page_programs[SNOR_MIDX_1_1_4]	= SPINOR_OP_PP_1_1_4,
++
++	.erase_types[0]		= SNOR_OP_ERASE_64K(SPINOR_OP_SE),
++
++};
++
+ #define PARAMS(_name) .params = &_name##_params
+ 
+ /* Used when the "_ext_id" is two bytes at most */
+@@ -1324,6 +1341,12 @@
+ 	{ "pn25f16s", INFO(0xe04015, 0, 64 * 1024,  32, 0), PARAMS(paragon) },
+ 	{ "pn25f32s", INFO(0xe04016, 0, 64 * 1024,  64, 0), PARAMS(paragon) },
+ 
++	/* XMC 3.3V */
++	{ "xm25qh128a",   INFO(0x207018, 0, 64 * 1024,   256, SPI_NOR_DUAL_READ),
++	    PARAMS(xmc) },
++	{ "xm25qh128b",   INFO(0x206018, 0, 64 * 1024,   256, SPI_NOR_DUAL_READ),
++	    PARAMS(xmc) },
++
+ 	{ },
+ };
+ 
+@@ -1493,7 +1516,7 @@
+ 		ssize_t written;
+ 
+ 		page_offset = (to + i) & (nor->page_size - 1);
+-#ifndef CONFIG_SPI_HISI_SFC 
++#ifndef CONFIG_SPI_HISI_SFC
+ 		WARN_ONCE(page_offset,
+ 			  "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.",
+ 			  page_offset);

br-ext-chip-hisilicon/board/hi3516av100/kernel/patches/11_fix_yylloc_for_modern_computers.patch

@@ -0,0 +1,11 @@
+--- a/scripts/dtc/dtc-lexer.lex.c_shipped	2016-08-28 13:19:20.000000000 +0300
++++ b/scripts/dtc/dtc-lexer.lex.c_shipped	2021-04-02 00:06:02.972781070 +0300
+@@ -637,7 +637,7 @@
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
++extern YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

br-ext-chip-hisilicon/configs/unknown_unknown_hi3516av100_openipc_defconfig

@@ -0,0 +1,96 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_EABI=y
+BR2_ARM_FPU_NEON_VFPV4=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="4.9.37"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+
+# Toolchain
+BR2_PER_PACKAGE_DIRECTORIES=y
+BR2_GCC_VERSION_7_X=y
+BR2_TOOLCHAIN_USES_GLIBC=y
+BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
+BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
+# BR2_TOOLCHAIN_BUILDROOT_CXX is not set
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_USE_SSP=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.37"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HISILICON_PATH)/board/hi3516av100/kernel/hi3516av100.generic.config"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_EXT_HISI_PATCHER=y
+BR2_LINUX_KERNEL_EXT_HISI_PATCHER_LIST="$(BR2_EXTERNAL_HISILICON_PATH)/board/hi3516av100/kernel/patches/ $(BR2_EXTERNAL_HISILICON_PATH)/board/hi3516av100/kernel/overlay"
+
+# Filesystem
+# BR2_TARGET_TZ_INFO is not set
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+BR2_ROOTFS_OVERLAY="$(TOPDIR)/../general/overlay"
+BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/../scripts/executing_commands_for_$(BR2_TOOLCHAIN_BUILDROOT_LIBC).sh"
+
+# OpenIPC configuration
+BR2_TOOLCHAIN_BUILDROOT_VENDOR="openipc"
+BR2_TARGET_GENERIC_ISSUE="Welcome to OpenIPC v2.1"
+BR2_TARGET_GENERIC_HOSTNAME="openipc-hi3516av100"
+BR2_GLOBAL_PATCH_DIR="$(TOPDIR)/../general/package/all-patches"
+
+# OpenIPC packages
+BR2_PACKAGE_BUSYBOX_CONFIG="$(TOPDIR)/../general/package/busybox/busybox.config"
+BR2_PACKAGE_DROPBEAR=y
+# BR2_PACKAGE_FDK_AAC_OPENIPC is not set
+BR2_PACKAGE_FWPRINTENV_OPENIPC=y
+BR2_PACKAGE_HASERL=y
+BR2_PACKAGE_HISI_GPIO=y
+BR2_PACKAGE_HISILICON_OSDRV_HI3516AV100=y
+# BR2_PACKAGE_HISILICON_OSDRV_HI3516EV300 is not set
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSON_C=y
+BR2_PACKAGE_LAME_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_VERBOSE is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBCURL_OPENIPC_MBEDTLS=y
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBEVENT_OPENIPC_REMOVE_PYSCRIPT=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_LIBYAML=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_HI3516AV100=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+# BR2_PACKAGE_MBEDTLS_OPENIPC_PROGRAMS is not set
+# BR2_PACKAGE_MBEDTLS_OPENIPC_COMPRESSION is not set
+BR2_PACKAGE_MICROBE_WEB=y
+# BR2_PACKAGE_MINI_SNMPD is not set
+BR2_PACKAGE_MOTORS=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+# BR2_PACKAGE_SSHPASS is not set
+BR2_PACKAGE_UACME_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
+
+# WiFi
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+# BR2_PACKAGE_RTL8188EU is not set
+
+# WIREGUARD
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y

br-ext-chip-hisilicon/configs/unknown_unknown_hi3516dv100_openipc_defconfig

@@ -0,0 +1,96 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_EABI=y
+BR2_ARM_FPU_NEON_VFPV4=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="4.9.37"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+
+# Toolchain
+BR2_PER_PACKAGE_DIRECTORIES=y
+BR2_GCC_VERSION_7_X=y
+BR2_TOOLCHAIN_USES_GLIBC=y
+BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
+BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc"
+# BR2_TOOLCHAIN_BUILDROOT_CXX is not set
+BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
+BR2_TOOLCHAIN_BUILDROOT_USE_SSP=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.37"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HISILICON_PATH)/board/hi3516av100/kernel/hi3516dv100.generic.config"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_EXT_HISI_PATCHER=y
+BR2_LINUX_KERNEL_EXT_HISI_PATCHER_LIST="$(BR2_EXTERNAL_HISILICON_PATH)/board/hi3516av100/kernel/patches/ $(BR2_EXTERNAL_HISILICON_PATH)/board/hi3516av100/kernel/overlay"
+
+# Filesystem
+# BR2_TARGET_TZ_INFO is not set
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+BR2_ROOTFS_OVERLAY="$(TOPDIR)/../general/overlay"
+BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/../scripts/executing_commands_for_$(BR2_TOOLCHAIN_BUILDROOT_LIBC).sh"
+
+# OpenIPC configuration
+BR2_TOOLCHAIN_BUILDROOT_VENDOR="openipc"
+BR2_TARGET_GENERIC_ISSUE="Welcome to OpenIPC v2.1"
+BR2_TARGET_GENERIC_HOSTNAME="openipc-hi3516dv100"
+BR2_GLOBAL_PATCH_DIR="$(TOPDIR)/../general/package/all-patches"
+
+# OpenIPC packages
+BR2_PACKAGE_BUSYBOX_CONFIG="$(TOPDIR)/../general/package/busybox/busybox.config"
+BR2_PACKAGE_DROPBEAR=y
+# BR2_PACKAGE_FDK_AAC_OPENIPC is not set
+BR2_PACKAGE_FWPRINTENV_OPENIPC=y
+BR2_PACKAGE_HASERL=y
+BR2_PACKAGE_HISI_GPIO=y
+BR2_PACKAGE_HISILICON_OSDRV_HI3516AV100=y
+# BR2_PACKAGE_HISILICON_OSDRV_HI3516EV300 is not set
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSON_C=y
+BR2_PACKAGE_LAME_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_VERBOSE is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBCURL_OPENIPC_MBEDTLS=y
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBEVENT_OPENIPC_REMOVE_PYSCRIPT=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_LIBYAML=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_HI3516AV100=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+# BR2_PACKAGE_MBEDTLS_OPENIPC_PROGRAMS is not set
+# BR2_PACKAGE_MBEDTLS_OPENIPC_COMPRESSION is not set
+BR2_PACKAGE_MICROBE_WEB=y
+# BR2_PACKAGE_MINI_SNMPD is not set
+BR2_PACKAGE_MOTORS=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+# BR2_PACKAGE_SSHPASS is not set
+BR2_PACKAGE_UACME_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
+
+# WiFi
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
+# BR2_PACKAGE_RTL8188EU is not set
+
+# WIREGUARD
+BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+BR2_PACKAGE_WIREGUARD_TOOLS=y

br-ext-chip-hisilicon/external.mk

@@ -7,6 +7,7 @@ include $(BR2_EXTERNAL_HISILICON_PATH)/package/fdk-aac-openipc/fdk-aac-openipc.m
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/fwprintenv-openipc/fwprintenv-openipc.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/hisi_gpio/hisi_gpio.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-opensdk/hisilicon-opensdk.mk
+include $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/hisilicon-osdrv-hi3516av100.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv200/hisilicon-osdrv-hi3516cv200.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv300/hisilicon-osdrv-hi3516cv300.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516cv500/hisilicon-osdrv-hi3516cv500.mk
@@ -19,6 +20,7 @@ include $(BR2_EXTERNAL_HISILICON_PATH)/package/libhv-openipc/libhv-openipc.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/libogg-openipc/libogg-openipc.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/libsrt-openipc/libsrt-openipc.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/majestic-fonts/majestic-fonts.mk
+include $(BR2_EXTERNAL_HISILICON_PATH)/package/majestic-hi3516av100/majestic-hi3516av100.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/majestic-hi3516cv200/majestic-hi3516cv200.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/majestic-hi3516cv300/majestic-hi3516cv300.mk
 include $(BR2_EXTERNAL_HISILICON_PATH)/package/majestic-hi3516cv500/majestic-hi3516cv500.mk

br-ext-chip-hisilicon/package/hisilicon-osdrv-hi3516av100

@@ -0,0 +1 @@
+../../general/package/hisilicon-osdrv-hi3516av100

br-ext-chip-hisilicon/package/majestic-hi3516av100

@@ -0,0 +1 @@
+../../general/package/majestic-hi3516av100

building.sh

@@ -110,7 +110,15 @@ hi3516ev100() {
   soc="hi3516ev100"
   fresh && make PLATFORM=hisilicon BOARD=unknown_unknown_${soc}_openipc all && rename
 }
-
+#################################################################################
+hi3516av100() {
+  soc="hi3516av100"
+  fresh && make PLATFORM=hisilicon BOARD=unknown_unknown_${soc}_openipc all && rename
+}
+hi3516dv100() {
+  soc="hi3516dv100"
+  fresh && make PLATFORM=hisilicon BOARD=unknown_unknown_${soc}_openipc all && rename
+}
 #################################################################################
 
 hi3516cv500() {
@@ -297,8 +305,10 @@ xm550() {
 # hi3516cv100                   # testing..
 #
 # hi3516cv200                   # testing..
-hi3518ev200                   # testing..
+# hi3518ev200                   # testing..
 #
+# hi3516av100                   # OpenIPC
+hi3516dv100                   # OpenIPC
 # hi3516cv300                   # testind..
 # hi3516ev100                   # testind..
 #

general/package/hisilicon-osdrv-hi3516av100/Config.in

@@ -0,0 +1,6 @@
+config BR2_PACKAGE_HISILICON_OSDRV_HI3516AV100
+	bool "hisilicon-osdrv-hi3516av100"
+	help
+	  hisilicon-osdrv-hi3516av100 - Hisilicon kernel modules and libs
+
+	  https://openipc.org

general/package/hisilicon-osdrv-hi3516av100/files/script/S99hisilicon

@@ -0,0 +1,68 @@
+#!/bin/sh
+
+DAEMON="majestic"
+PIDFILE="/var/run/$DAEMON.pid"
+
+DAEMON_ARGS="-s"
+
+# shellcheck source=/dev/null
+[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
+
+# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
+start() {
+	logger -s -p daemon.info -t hisilicon "Check MAC for Xiongmai devices"
+	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
+		logger -s -p daemon.info -t hisilicon "The eth0 interface has a lousy MAC, let's try to change it.."
+		XMMAC="$(ipcinfo --xm_mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && ifconfig eth0 hw ether ${XMMAC} && logger -s -p daemon.info -t hisilicon "The eth0 interface have new MAC - ${XMMAC}" && reboot -f
+	else
+		logger -s -p daemon.info -t hisilicon "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
+	fi
+	#
+	logger -s -p daemon.info -t hisilicon "Loading of kernel modules and initialization of the video system has started"
+	export TZ=$(cat /etc/TZ)
+	load_hisilicon -i
+	#
+	printf 'Starting %s: ' "$DAEMON"
+	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
+	# shellcheck disable=SC2086 # we need the word splitting
+	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
+		-- $DAEMON_ARGS
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+stop() {
+	printf 'Stopping %s: ' "$DAEMON"
+	[ -f /usr/sbin/$DAEMON ] || echo -en "DISABLED, "
+	start-stop-daemon -K -q -p "$PIDFILE"
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		rm -f "$PIDFILE"
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+restart() {
+	stop
+	sleep 1
+	start
+}
+
+case "$1" in
+	start|stop|restart)
+		"$1";;
+	reload)
+		# Restart, since there is no true "reload" feature.
+		restart;;
+	*)
+		echo "Usage: $0 {start|stop|restart|reload}"
+		exit 1
+esac

general/package/hisilicon-osdrv-hi3516av100/files/script/ircut_demo

@@ -0,0 +1,87 @@
+#!/bin/sh
+
+# on EV200:
+# GPIO1_0 -> GPIO8 (1*8+0 = 8)
+# GPIO1_1 -> GPIO9 (1*8+1 = 9)
+
+# on EV300:
+# GPIO1_3 -> GPIO11
+# GPIO1_2 -> GPIO10
+
+#(normal mode)
+ir_cut_enable() {
+  # pin_mux
+  echo "$gpio_0" >/sys/class/gpio/unexport
+  echo "$gpio_1" >/sys/class/gpio/unexport
+  echo "$gpio_0" >/sys/class/gpio/export
+  echo "$gpio_1" >/sys/class/gpio/export
+
+  # dir
+  echo "out" >/sys/class/gpio/gpio$gpio_0/direction
+  echo "out" >/sys/class/gpio/gpio$gpio_1/direction
+
+  # data, gpio_1: 0, gpio_0: 1  (normal mode)
+  echo "1" >/sys/class/gpio/gpio$gpio_0/value
+  echo "0" >/sys/class/gpio/gpio$gpio_1/value
+
+  #sleep 1s
+  sleep 1
+
+  # back to original
+  echo "0" >/sys/class/gpio/gpio$gpio_0/value
+  echo "0" >/sys/class/gpio/gpio$gpio_1/value
+}
+
+# (ir mode)
+ir_cut_disable() {
+  # pin_mux
+  echo "$gpio_0" >/sys/class/gpio/unexport
+  echo "$gpio_1" >/sys/class/gpio/unexport
+  echo "$gpio_0" >/sys/class/gpio/export
+  echo "$gpio_1" >/sys/class/gpio/export
+
+  # dir
+  echo "out" >/sys/class/gpio/gpio$gpio_0/direction
+  echo "out" >/sys/class/gpio/gpio$gpio_1/direction
+
+  # data, gpio_1: 1, gpio_0: 0  (ir mode)
+  echo "0" >/sys/class/gpio/gpio$gpio_0/value
+  echo "1" >/sys/class/gpio/gpio$gpio_1/value
+
+  #sleep 1s
+  sleep 1
+
+  # back to original
+  echo "0" >/sys/class/gpio/gpio$gpio_0/value
+  echo "0" >/sys/class/gpio/gpio$gpio_1/value
+}
+
+gpio_0=0
+gpio_1=0
+
+if [ $# -lt 2 ]; then
+  echo "usage : ./ircut_demo <chip> <mode>"
+  echo "for example:"
+  echo "ir mode : ./ircut_demo hi3516ev200 1"
+else
+  if [ $1 = "hi3516ev200" ]; then
+    gpio_0=8
+    gpio_1=9
+  elif [ $1 = "hi3516ev300" ]; then
+    gpio_0=11
+    gpio_1=10
+  else
+    echo "wrong chipid: $1, please select: hi3516ev200 or hi3516ev300."
+    exit
+  fi
+
+  if [ $2 -eq 0 ]; then
+    echo "normal mode, ir_cut on"
+    ir_cut_enable >/dev/null
+  elif [ $2 -eq 1 ]; then
+    echo "ir mode, ir_cut off"
+    ir_cut_disable >/dev/null
+  else
+    echo "invalid mode, please slect 0 or 1."
+  fi
+fi

general/package/hisilicon-osdrv-hi3516av100/files/script/load3516a

@@ -0,0 +1,391 @@
+#!/bin/sh
+# Useage: ./load3516a [ -r|-i|-a ] [ sensor ]
+#         -r : rmmod all modules
+#         -i : insmod all modules
+#    default : rmmod all moules and then insmod them
+#
+
+
+# imx178 mn34220 imx185 ar0330 ov4689 ov5658 ar0230 imx117 ar0237
+
+
+
+####################Variables Definition##########################
+
+
+SNS_TYPE=mn34220        # sensor type
+
+mem_total=512;          # 512M, total mem
+mem_start=0x80000000;   # phy mem start
+
+os_mem_size=64;         # 64M, os mem
+mmz_start=0x84000000;   # mmz start addr
+mmz_size=128M;          # 128M, mmz size
+
+##################################################################
+
+report_error()
+{
+	echo "******* Error: There's something wrong, please check! *****"
+	exit 1
+}
+
+insert_audio()
+{
+	insmod acodec.ko
+	#insmod hidmac.ko
+	insmod hi3516a_aio.ko
+	insmod hi3516a_ai.ko
+	insmod hi3516a_ao.ko
+	insmod hi3516a_aenc.ko
+	insmod hi3516a_adec.ko
+	#insmod extdrv/tlv_320aic31.ko
+	#insmod extdrv/ak7756.ko 
+	echo "insert audio"
+}
+
+remove_audio()
+{
+	#rmmod tlv_320aic31.ko
+	#rmmod ak7756.ko
+	rmmod hi3516a_adec
+	rmmod hi3516a_aenc
+	rmmod hi3516a_ao
+	rmmod hi3516a_ai
+	rmmod hi3516a_aio
+	rmmod acodec
+	echo "remove audio"
+}
+
+insert_sns()
+{
+	case $SNS_TYPE in		
+		imx123)
+			himm 0x200f0050 0x1;                # spi0_sclk
+			himm 0x200f0054 0x1;                # spi0_sdo
+			himm 0x200f0058 0x1;                # spi0_sdi
+			himm 0x200f005c 0x1;                # spi0_csn
+
+			#himm 0x2003002c 0xb0007            # sensor unreset, clk 27MHz, VI 250MHz
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+			himm 0x20030104 0x0;                # VI 250MHz
+			insmod extdrv/sensor_spi.ko
+			;;			
+		imx178)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+			himm 0x2003002c 0xF0007             # sensor unreset, clk 25MHz, VI 250MHz
+			#himm 0x2003002c 0x90007            # sensor unreset, clk 37.125MHz, VI 250MHz
+			;;
+		imx185)
+			himm 0x200f0050 0x1;                # spi0_sclk
+			himm 0x200f0054 0x1;                # spi0_sdo
+			himm 0x200f0058 0x1;                # spi0_sdi
+			himm 0x200f005c 0x1;                # spi0_csn
+			
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+
+			insmod extdrv/sensor_spi.ko
+			;;
+		imx117)
+			himm 0x200f0050 0x1;                # spi0_sclk
+			himm 0x200f0054 0x1;                # spi0_sdo
+			himm 0x200f0058 0x1;                # spi0_sdi
+			himm 0x200f005c 0x1;                # spi0_csn
+			
+			himm 0x200f00dc 0x1;
+			himm 0x200f00e0 0x1;
+			himm 0x20030038 0x6;
+			
+			himm 0x20131020 0x30de8;
+			himm 0x20131024 0x30de5;
+			himm 0x2013102c 0x5;
+			
+			himm 0x20131060 0xbf;
+			himm 0x20131064 0xbc;
+			himm 0x2013106c 0x5;
+
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+					
+			insmod extdrv/sensor_spi.ko sensor=imx117
+			;;	
+		mn34220)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+			
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+			;;
+		ar0330)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+
+			himm 0x2003002c 0xE0007             # sensor unreset, clk 24MHz, VI 250MHz
+			;;
+		ov5658)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+			himm 0x2003002c 0xE0007             # sensor unreset, clk 24MHz, VI 250MHz
+			himm 0x20030104 0x0;                # VI 250MHz
+			;;
+		ov4689)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+			himm 0x2003002c 0xE0007             # sensor unreset, clk 24MHz, VI 250MHz
+			himm 0x20030104 0x0;
+			;;
+		ar0230|ar0237)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+
+			himm 0x2003002c 0xB0007             # sensor unreset, clk 27MHz, VI 250MHz
+			;;
+		bt1120)
+			
+			;;
+		*)
+			echo "xxxx Invalid sensor type $SNS_TYPE xxxx"
+			report_error
+			;;
+	esac
+}
+
+remove_sns()
+{
+	rmmod ssp &> /dev/null
+	rmmod sensor_spi &> /dev/null
+	rmmod ssp_pana &> /dev/null
+}
+
+sys_config()
+{
+	# pinmux configuration
+	sh pinmux_hi3516a.sh > /dev/null
+
+	# clock configuration
+	sh clkcfg_hi3516a.sh > /dev/null
+
+	# system configuration
+	sh sysctl_hi3516a.sh $b_arg_online  > /dev/null
+}
+
+insert_ko()
+{
+	# sys config
+	sys_config;
+
+	# driver load
+	insmod mmz.ko mmz=anonymous,0,$mmz_start,$mmz_size anony=1 || report_error
+	insmod hi_media.ko
+	insmod hi3516a_base.ko
+	
+	insmod hi3516a_sys.ko vi_vpss_online=$b_arg_online sensor=$SNS_TYPE mem_total=$mem_total
+	if [[ $? -ne 0 ]]; then 
+		exit;
+	fi  
+
+	insmod hi3516a_tde.ko
+	insmod hi3516a_region.ko
+	insmod hi3516a_vgs.ko
+
+	insmod hi3516a_isp.ko
+	insmod hi3516a_viu.ko detect_err_frame=10;
+	insmod hi3516a_vpss.ko
+	insmod hi3516a_vou.ko lowPowerMode=0
+	#insmod hi3516a_vou.ko detectCycle=0            #close dac detect
+	insmod hifb.ko video="hifb:vram0_size:1620"     # default pal
+
+	insmod hi3516a_rc.ko
+	insmod hi3516a_venc.ko
+	insmod hi3516a_chnl.ko
+	insmod hi3516a_h264e.ko
+	insmod hi3516a_h265e.ko
+	insmod hi3516a_jpege.ko
+	insmod hi3516a_vda.ko
+	insmod hi3516a_ive.ko
+
+	insmod extdrv/sensor_i2c.ko
+	insmod extdrv/pwm.ko
+	insmod extdrv/piris.ko
+	#insmod extdrv/adv_7441.ko
+	insmod extdrv/sil9024.ko norm=12    #1080P@30fps
+
+	echo "==== Your input Sensor type is $SNS_TYPE ===="
+	#insert_sns > /dev/null
+	insert_sns
+
+	insert_audio
+	echo "==== Your input Sensor type is $SNS_TYPE ===="
+
+	insmod hi_mipi.ko
+	#insmod hi3516a_pm.ko
+}
+
+remove_ko()
+{
+	#rmmod hi3516a_pm
+	remove_audio
+	remove_sns
+
+	rmmod sil9024 &> /dev/null
+	rmmod pwm
+
+	rmmod hi3516a_ive
+	rmmod hi3516a_vda
+	
+	rmmod hi3516a_rc
+	rmmod hi3516a_jpege
+	rmmod hi3516a_h264e
+	rmmod hi3516a_h265e
+	rmmod hi3516a_chnl
+	rmmod hi3516a_venc
+
+	rmmod hifb
+	rmmod hi3516a_vou
+	rmmod hi3516a_vpss
+	rmmod hi3516a_viu
+	rmmod hi_mipi
+
+	rmmod ssp_ad9020
+	rmmod hi3516a_vgs
+	rmmod hi3516a_region
+	rmmod hi3516a_tde
+
+	rmmod sensor_i2c
+	rmmod piris
+	rmmod hi3516a_isp
+	rmmod hi3516a_sys
+	rmmod hi3516a_base
+	rmmod hi_media
+	rmmod mmz
+}
+
+sys_restore()
+{
+	####################################################
+	pinmux_hi3516a.sh > /dev/null
+
+	clkcfg_hi3516a.sh > /dev/null
+
+	# system configuration
+	sysctl_hi3516a.sh $b_arg_online > /dev/null
+
+	insert_sns;
+}
+
+load_usage()
+{
+	echo "Usage:  ./load3516a [-option] [sensor_name]"
+	echo "options:"
+	echo "    -i                       insert modules"
+	echo "    -r                       remove modules"
+	echo "    -a                       remove modules first, then insert modules"
+	echo "    -sensor sensor_name      config sensor type [default: ar0130]"
+	echo "    -osmem os_mem_size       config os mem size [unit: M, default: 64]"
+	echo "    -offline                 vi/vpss offline"
+	echo "    -h                       help information"
+	echo -e "Available sensors: imx178, imx185, mn34220, etc"
+	echo -e "notes: osmem option can't be used when mmz zone partition is enable\n\n"
+	echo -e "for example online:   ./load3516a -a -sensor imx178 -osmem 64\n"
+	echo -e "            offline:  ./load3516a -a -sensor imx178 -osmem 64 -offline\n"
+}
+
+calc_mmz_info()
+{
+	mmz_start=`echo "$mem_start $os_mem_size" | 
+	awk 'BEGIN { temp = 0; }
+	{
+		temp = $1/1024/1024 + $2;
+	} 
+	END { printf("0x%x00000\n", temp); }'`
+
+	mmz_size=`echo "$mem_total $os_mem_size" | 
+	awk 'BEGIN { temp = 0; }
+	{
+		temp = $1 - $2;
+	} 
+	END { printf("%dM\n", temp); }'`
+	echo "mmz_start: $mmz_start, mmz_size: $mmz_size"
+}
+
+
+######################parse arg###################################
+b_arg_os_mem=0
+b_arg_sensor=0
+b_arg_insmod=0
+b_arg_remove=0
+b_arg_online=1
+b_arg_restore=0
+
+for arg in $@
+do
+	if [ $b_arg_os_mem -eq 1 ] ; then
+		b_arg_os_mem=0;
+		os_mem_size=$arg;
+
+		if [ -z $os_mem_size ]; then
+			echo "[error] os_mem_size is null"
+			exit;
+		fi
+
+		if [ $os_mem_size -ge $mem_total ] ; then
+			echo "[err] os_mem[$os_mem_size], over total_mem[$mem_total]"
+			exit;
+		fi
+
+		calc_mmz_info;
+	fi
+
+	if [ $b_arg_sensor -eq 1 ] ; then
+		b_arg_sensor=0
+		SNS_TYPE=$arg;
+	fi
+
+	case $arg in
+		"-i")
+			b_arg_insmod=1;
+			;;
+		"-r")
+			b_arg_remove=1;
+			;;
+		"-a")			
+			b_arg_insmod=1;
+			b_arg_remove=1;
+			;;
+		"-h")
+			load_usage;
+			;;
+		"-sensor")
+			b_arg_sensor=1;
+			;;
+		"-osmem")
+			b_arg_os_mem=1;
+			;;
+		"-restore")
+			b_arg_restore=1;
+			;;
+		"-offline")
+			b_arg_online=0;
+			;;
+	esac
+done
+#######################parse arg end########################
+
+#######################Action###############################
+
+if [ $# -lt 1 ]; then
+    load_usage;
+    exit 0;
+fi
+
+if [ $b_arg_remove -eq 1 ]; then
+	remove_ko;
+fi
+
+if [ $b_arg_insmod -eq 1 ]; then
+	insert_ko;
+fi
+
+if [ $b_arg_restore -eq 1 ]; then	
+	sys_restore;
+fi
+

general/package/hisilicon-osdrv-hi3516av100/files/script/load3516d

@@ -0,0 +1,381 @@
+#!/bin/sh
+# Useage: ./load3516a [ -r|-i|-a ] [ sensor ]
+#         -r : rmmod all modules
+#         -i : insmod all modules
+#    default : rmmod all moules and then insmod them
+#
+
+
+# mn34220 imx185 ar0330 ar0230 imx117 ar0237
+# Notes: hi3516d (16bit ddr) can only support sensor which resolution is 3M below
+
+
+
+####################Variables Definition##########################
+
+
+SNS_TYPE=mn34220        # sensor type
+
+mem_total=512;          # 512M, total mem
+mem_start=0x80000000;   # phy mem start
+
+os_mem_size=64;         # 64M, os mem
+mmz_start=0x84000000;   # mmz start addr
+mmz_size=128M;          # 128M, mmz size
+
+##################################################################
+
+report_error()
+{
+	echo "******* Error: There's something wrong, please check! *****"
+	exit 1
+}
+
+insert_audio()
+{
+	insmod acodec.ko
+	#insmod hidmac.ko
+	insmod hi3516a_aio.ko
+	insmod hi3516a_ai.ko
+	insmod hi3516a_ao.ko
+	insmod hi3516a_aenc.ko
+	insmod hi3516a_adec.ko
+	#insmod extdrv/tlv_320aic31.ko
+	#insmod extdrv/ak7756.ko 
+	echo "insert audio"
+}
+
+remove_audio()
+{
+	#rmmod tlv_320aic31.ko
+	#rmmod ak7756.ko
+	rmmod hi3516a_adec
+	rmmod hi3516a_aenc
+	rmmod hi3516a_ao
+	rmmod hi3516a_ai
+	rmmod hi3516a_aio
+	rmmod acodec
+	echo "remove audio"
+}
+
+insert_sns()
+{
+	case $SNS_TYPE in			
+		imx123)
+			himm 0x200f0050 0x1;                # spi0_sclk
+			himm 0x200f0054 0x1;                # spi0_sdo
+			himm 0x200f0058 0x1;                # spi0_sdi
+			himm 0x200f005c 0x1;                # spi0_csn
+
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+			himm 0x20030104 0x0;                # VI 250MHz
+			insmod extdrv/sensor_spi.ko
+			;;			
+		imx185)
+			himm 0x200f0050 0x1;                # spi0_sclk
+			himm 0x200f0054 0x1;                # spi0_sdo
+			himm 0x200f0058 0x1;                # spi0_sdi
+			himm 0x200f005c 0x1;                # spi0_csn
+			
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+
+			insmod extdrv/sensor_spi.ko
+			;;
+		imx117)
+			himm 0x200f0050 0x1;                # spi0_sclk
+			himm 0x200f0054 0x1;                # spi0_sdo
+			himm 0x200f0058 0x1;                # spi0_sdi
+			himm 0x200f005c 0x1;                # spi0_csn
+			
+			himm 0x200f00dc 0x1;
+			himm 0x200f00e0 0x1;
+			himm 0x20030038 0x6;
+			
+			himm 0x20131020 0x30de8;
+			himm 0x20131024 0x30de5;
+			himm 0x2013102c 0x5;
+			
+			himm 0x20131060 0xbf;
+			himm 0x20131064 0xbc;
+			himm 0x2013106c 0x5;
+
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+					
+			insmod extdrv/sensor_spi.ko sensor=imx117
+			;;	
+		mn34220)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+			
+			himm 0x2003002c 0x90007             # sensor unreset, clk 37.125MHz, VI 250MHz
+			;;
+		ar0330)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+
+			himm 0x2003002c 0xE0007             # sensor unreset, clk 24MHz, VI 250MHz
+			;;
+		ov4689)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+			himm 0x2003002c 0xE0007             # sensor unreset, clk 24MHz, VI 250MHz
+			himm 0x20030104 0x0;
+			;;
+		ar0230|ar0237)
+			himm 0x200f0050 0x2;                # i2c0_scl
+			himm 0x200f0054 0x2;                # i2c0_sda
+
+			himm 0x2003002c 0xB0007             # sensor unreset, clk 27MHz, VI 250MHz
+			;;
+		bt1120)
+			
+			;;
+		*)
+			echo "xxxx Invalid sensor type $SNS_TYPE xxxx"
+			report_error
+			;;
+	esac
+}
+
+remove_sns()
+{
+	rmmod ssp &> /dev/null
+	rmmod sensor_spi &> /dev/null
+	rmmod ssp_pana &> /dev/null
+}
+
+sys_config()
+{
+	# pinmux configuration
+	sh pinmux_hi3516a.sh > /dev/null
+
+	# clock configuration
+	sh clkcfg_hi3516d.sh > /dev/null
+
+	# system configuration
+	sh sysctl_hi3516a.sh $b_arg_online  > /dev/null
+}
+
+insert_ko()
+{
+	# sys config
+	sys_config;
+
+	# driver load
+	insmod mmz.ko mmz=anonymous,0,$mmz_start,$mmz_size anony=1 || report_error
+	insmod hi_media.ko
+	insmod hi3516a_base.ko
+	
+	insmod hi3516a_sys.ko vi_vpss_online=$b_arg_online sensor=$SNS_TYPE mem_total=$mem_total
+	if [[ $? -ne 0 ]]; then 
+		exit;
+	fi  
+
+	insmod hi3516a_tde.ko
+	insmod hi3516a_region.ko
+	insmod hi3516a_vgs.ko
+
+	insmod hi3516a_isp.ko
+	insmod hi3516a_viu.ko detect_err_frame=10;
+	insmod hi3516a_vpss.ko
+	insmod hi3516a_vou.ko lowPowerMode=0
+	#insmod hi3516a_vou.ko detectCycle=0            #close dac detect
+	insmod hifb.ko video="hifb:vram0_size:1620"     # default pal
+
+	insmod hi3516a_rc.ko
+	insmod hi3516a_venc.ko
+	insmod hi3516a_chnl.ko
+	insmod hi3516a_h264e.ko
+	insmod hi3516a_h265e.ko
+	insmod hi3516a_jpege.ko
+	insmod hi3516a_vda.ko
+	insmod hi3516a_ive.ko
+
+	insmod extdrv/sensor_i2c.ko
+	insmod extdrv/pwm.ko
+	insmod extdrv/piris.ko
+	#insmod extdrv/adv_7441.ko
+	insmod extdrv/sil9024.ko norm=12    #1080P@30fps
+
+	echo "==== Your input Sensor type is $SNS_TYPE ===="
+	#insert_sns > /dev/null
+	insert_sns
+
+	insert_audio
+	echo "==== Your input Sensor type is $SNS_TYPE ===="
+
+	insmod hi_mipi.ko
+	#insmod hi3516a_pm.ko
+}
+
+remove_ko()
+{
+	#rmmod hi3516a_pm
+	remove_audio
+	remove_sns
+
+	rmmod sil9024 &> /dev/null
+	rmmod sil9034 &> /dev/null
+	rmmod pwm	
+
+	rmmod hi3516a_ive
+	rmmod hi3516a_vda
+	
+	rmmod hi3516a_rc
+	rmmod hi3516a_jpege
+	rmmod hi3516a_h264e
+	rmmod hi3516a_h265e
+	rmmod hi3516a_chnl
+	rmmod hi3516a_venc
+
+	rmmod hifb
+	rmmod hi3516a_vou
+	rmmod hi3516a_vpss
+	rmmod hi3516a_viu
+	rmmod hi_mipi
+
+	rmmod ssp_ad9020
+	rmmod hi3516a_vgs
+	rmmod hi3516a_region
+	rmmod hi3516a_tde
+
+	rmmod sensor_i2c
+	rmmod piris
+	rmmod hi3516a_isp
+	rmmod hi3516a_sys
+	rmmod hi3516a_base
+	rmmod hi_media
+	rmmod mmz
+}
+
+sys_restore()
+{
+	####################################################
+	pinmux_hi3516a.sh > /dev/null
+
+	clkcfg_hi3516a.sh > /dev/null
+
+	# system configuration
+	sysctl_hi3516a.sh $b_arg_online > /dev/null
+
+	insert_sns;
+}
+
+load_usage()
+{
+	echo "Usage:  ./load3516a [-option] [sensor_name]"
+	echo "options:"
+	echo "    -i                       insert modules"
+	echo "    -r                       remove modules"
+	echo "    -a                       remove modules first, then insert modules"
+	echo "    -sensor sensor_name      config sensor type [default: ar0130]"
+	echo "    -osmem os_mem_size       config os mem size [unit: M, default: 64]"
+	echo "    -offline                 vi/vpss offline"
+	echo "    -h                       help information"
+	echo -e "Available sensors: imx185, mn34220, etc"
+	echo -e "notes: osmem option can't be used when mmz zone partition is enable\n\n"
+	echo -e "for example online:   ./load3516a -a -sensor mn34220 -osmem 64\n"
+	echo -e "            offline:  ./load3516a -a -sensor mn34220 -osmem 64 -offline\n\n"
+	echo -e "Notes: hi3516d (16bit ddr) can only support sensor which resolution is 3M below"
+}
+
+calc_mmz_info()
+{
+	mmz_start=`echo "$mem_start $os_mem_size" | 
+	awk 'BEGIN { temp = 0; }
+	{
+		temp = $1/1024/1024 + $2;
+	} 
+	END { printf("0x%x00000\n", temp); }'`
+
+	mmz_size=`echo "$mem_total $os_mem_size" | 
+	awk 'BEGIN { temp = 0; }
+	{
+		temp = $1 - $2;
+	} 
+	END { printf("%dM\n", temp); }'`
+	echo "mmz_start: $mmz_start, mmz_size: $mmz_size"
+}
+
+
+######################parse arg###################################
+b_arg_os_mem=0
+b_arg_sensor=0
+b_arg_insmod=0
+b_arg_remove=0
+b_arg_online=1
+b_arg_restore=0
+
+for arg in $@
+do
+	if [ $b_arg_os_mem -eq 1 ] ; then
+		b_arg_os_mem=0;
+		os_mem_size=$arg;
+
+		if [ -z $os_mem_size ]; then
+			echo "[error] os_mem_size is null"
+			exit;
+		fi
+
+		if [ $os_mem_size -ge $mem_total ] ; then
+			echo "[err] os_mem[$os_mem_size], over total_mem[$mem_total]"
+			exit;
+		fi
+
+		calc_mmz_info;
+	fi
+
+	if [ $b_arg_sensor -eq 1 ] ; then
+		b_arg_sensor=0
+		SNS_TYPE=$arg;
+	fi
+
+	case $arg in
+		"-i")
+			b_arg_insmod=1;
+			;;
+		"-r")
+			b_arg_remove=1;
+			;;
+		"-a")			
+			b_arg_insmod=1;
+			b_arg_remove=1;
+			;;
+		"-h")
+			load_usage;
+			;;
+		"-sensor")
+			b_arg_sensor=1;
+			;;
+		"-osmem")
+			b_arg_os_mem=1;
+			;;
+		"-restore")
+			b_arg_restore=1;
+			;;
+		"-offline")
+			b_arg_online=0;
+			;;
+	esac
+done
+#######################parse arg end########################
+
+#######################Action###############################
+
+if [ $# -lt 1 ]; then
+    load_usage;
+    exit 0;
+fi
+
+if [ $b_arg_remove -eq 1 ]; then
+	remove_ko;
+fi
+
+if [ $b_arg_insmod -eq 1 ]; then
+	insert_ko;
+fi
+
+if [ $b_arg_restore -eq 1 ]; then	
+	sys_restore;
+fi
+

general/package/hisilicon-osdrv-hi3516av100/files/script/load_hisilicon

@@ -0,0 +1,385 @@
+#!/bin/sh
+#
+# This is part of OpenIPC.org project | 2020.08.01
+#
+# ar0237 imx290 imx307 imx323 imx385 jxf22 ov2718 ov2718_2a sc2235
+
+# SoC detect
+chipid=$(ipctool --chip_id)
+
+# MMZ config
+mem_start=0x80000000 # phy mem start
+
+mem_total=$(awk -F '=' '$1=="totalmem"{print $2}' RS=" " /proc/cmdline | tr -d 'M')
+mem_total=${mem_total:=64}
+
+os_mem_size=$(awk -F '=' '$1=="mem"{print $2}' RS=" " /proc/cmdline | tr -d 'M')
+os_mem_size=${os_mem_size:=32}
+
+report_error() {
+        echo "******* Error: There's something wrong, please check! *****"
+        exit 1
+}
+
+insert_mmz() {
+        insmod mmz.ko mmz=anonymous,0,$mmz_start,$mmz_size anony=1 || report_error
+}
+
+insert_detect() {
+        cd /lib/modules/4.9.37/hisilicon
+        insmod sys_config.ko vi_vpss_online=$b_arg_online sensor=unknown pin_mux_select=0
+        insert_mmz
+        insmod hi_media.ko
+        insmod hi3516a_base.ko
+        insmod hi3516a_sys.ko vi_vpss_online=$b_arg_online sensor=unknown mem_total=$mem_total
+        insert_isp
+        insmod sensor_i2c.ko
+        insmod sensor_spi.ko
+        SENSOR=ar0230 insert_sns
+}
+
+remove_detect() {
+        rmmod sensor_spi
+        rmmod sensor_i2c
+        rmmod hi3516a_isp
+        rmmod hi3516a_sys
+        rmmod hi3516a_base
+        rmmod hi_media
+        rmmod mmz
+}
+
+insert_audio() {
+        insmod acodec.ko
+        insmod hi3516a_aio.ko
+        insmod hi3516a_ai.ko
+        insmod hi3516a_ao.ko
+        insmod hi3516a_aenc.ko
+        insmod hi3516a_adec.ko
+        echo "insert audio"
+}
+
+remove_audio() {
+        rmmod hi3516a_adec
+        rmmod hi3516a_aenc
+        rmmod hi3516a_ao
+        rmmod hi3516a_ai
+        rmmod hi3516a_aio
+        rmmod acodec
+        echo "remove audio"
+}
+
+remove_sns() {
+        rmmod sensor_spi &>/dev/null
+        rmmod sensor_i2c &>/dev/null
+}
+
+insert_isp() {
+        case $SENSOR in
+        ov9750)
+                insmod hi3516a_isp.ko update_pos=1
+                ;;
+        *)
+                insmod hi3516a_isp.ko update_pos=0 proc_param=1
+                ;;
+        esac
+}
+
+insert_sns() {
+        case $SENSOR in
+        imx123)
+                devmem 0x200f0050 32 0x1 # spi0_sclk
+                devmem 0x200f0054 32 0x1 # spi0_sdo
+                devmem 0x200f0058 32 0x1 # spi0_sdi
+                devmem 0x200f005c 32 0x1 # spi0_csn
+
+                devmem 0x2003002c 32 0x90007 # sensor unreset, clk 37.125MHz, VI 250MHz
+                devmem 0x20030104 32 0x0     # VI 250MHz
+                insmod sensor_i2c.ko
+                ;;
+        imx185)
+                devmem 0x200f0050 0x1 # spi0_sclk
+                devmem 0x200f0054 0x1 # spi0_sdo
+                devmem 0x200f0058 0x1 # spi0_sdi
+                devmem 0x200f005c 0x1 # spi0_csn
+
+                devmem 0x2003002c 0x90007 # sensor unreset, clk 37.125MHz, VI 250MHz
+
+                insmod extdrv/sensor_spi.ko
+                ;;
+        imx117)
+                devmem 0x200f0050 0x1 # spi0_sclk
+                devmem 0x200f0054 0x1 # spi0_sdo
+                devmem 0x200f0058 0x1 # spi0_sdi
+                devmem 0x200f005c 0x1 # spi0_csn
+
+                devmem 0x200f00dc 0x1
+                devmem 0x200f00e0 0x1
+                devmem 0x20030038 0x6
+
+                devmem 0x20131020 0x30de8
+                devmem 0x20131024 0x30de5
+                devmem 0x2013102c 0x5
+
+                devmem 0x20131060 0xbf
+                devmem 0x20131064 0xbc
+                devmem 0x2013106c 0x5
+
+                devmem 0x2003002c 0x90007 # sensor unreset, clk 37.125MHz, VI 250MHz
+
+                insmod extdrv/sensor_spi.ko sensor=imx117
+                ;;
+        mn34220)
+                devmem 0x200f0050 0x2 # i2c0_scl
+                devmem 0x200f0054 0x2 # i2c0_sda
+
+                devmem 0x2003002c 0x90007 # sensor unreset, clk 37.125MHz, VI 250MHz
+                ;;
+        ar0330)
+                devmem 0x200f0050 0x2 # i2c0_scl
+                devmem 0x200f0054 0x2 # i2c0_sda
+
+                devmem 0x2003002c 0xE0007 # sensor unreset, clk 24MHz, VI 250MHz
+                ;;
+        ov4689)
+                devmem 0x200f0050 32 0x2     # i2c0_scl
+                devmem 0x200f0054 32 0x2     # i2c0_sda
+                devmem 0x2003002c 32 0xB0007 # sensor unreset, clk 27MHz, VI 250MHz
+                devmem 0x20030104 32 0x0
+                ;;
+        ar0230 | ar0237 | sc4236)
+                devmem 0x200f0050 32 0x2 # i2c0_scl
+                devmem 0x200f0054 32 0x2 # i2c0_sda
+
+                devmem 0x2003002c 32 0xB0007 # sensor unreset, clk 27MHz, VI 250MHz
+                devmem 0x20030104 32 0x0
+                ;;
+        bt1120) ;;
+
+        \
+                *)
+                echo "xxxx Invalid sensor type $SNS_TYPE xxxx"
+                report_error
+                ;;
+        esac
+}
+insert_ko() {
+        # sys config
+        #insmod sys_config.ko vi_vpss_online=$b_arg_online sensor=$SENSOR pin_mux_select=0
+
+        # driver load
+        insert_mmz
+        #insmod mmz.ko mmz=anonymous,0,$mmz_start,$mmz_size anony=1 || report_error
+        insmod hi_media.ko
+        insmod hi3516a_base.ko
+
+        insmod hi3516a_sys.ko vi_vpss_online=$b_arg_online sensor=$SENSOR mem_total=$mem_total
+        if [[ $? -ne 0 ]]; then
+                exit
+        fi
+
+        insmod hi3516a_tde.ko
+        insmod hi3516a_region.ko
+        insmod hi3516a_vgs.ko
+
+        insert_isp
+        insmod hi3516a_viu.ko detect_err_frame=10
+        insmod hi3516a_vpss.ko rfr_frame_comp=1
+        insmod hi3516a_vou.ko
+        #insmod hi3516a_vou.ko transparentTransmit=1 #enable transparentTransmit
+        #insmod hifb.ko video="hifb:vram0_size:1620"     # default pal
+
+        insmod hi3516a_rc.ko
+        insmod hi3516a_venc.ko
+        insmod hi3516a_chnl.ko ChnlLowPower=1
+        insmod hi3516a_h264e.ko H264eMiniBufMode=1
+        insmod hi3516a_jpege.ko
+        insmod hi3516a_ive.ko save_power=0
+        #       insmod hi3516a_ive.ko
+        insmod sensor_i2c.ko
+        insmod pwm.ko
+        insmod piris.ko
+        insert_sns
+        insert_audio
+
+        insmod hi_mipi.ko
+        echo "==== Your input Sensor type is $SENSOR ===="
+}
+
+remove_ko() {
+        rmmod sys_config.ko
+        remove_audio
+        remove_sns
+
+        rmmod pwm
+
+        rmmod hi3516a_ive
+
+        rmmod hi3516a_rc
+        rmmod hi3516a_jpege
+        rmmod hi3516a_h264e
+        rmmod hi3516a_chnl
+        rmmod hi3516a_venc
+
+        rmmod hifb
+        rmmod hi3516a_vou
+        rmmod hi3516a_vpss
+        rmmod hi3516a_viu
+        rmmod hi_mipi
+
+        rmmod hi3516a_vgs
+        rmmod hi3516a_region
+        rmmod hi3516a_tde
+
+        rmmod piris
+        rmmod hi3516a_isp
+        rmmod hi3516a_sys
+        rmmod hi3516a_base
+        rmmod hi_media
+        rmmod mmz
+}
+
+load_usage() {
+        echo "Usage:  ./load3518e [-option] [sensor_name]"
+        echo "options:"
+        echo "    -i                       insert modules"
+        echo "    -r                       remove modules"
+        echo "    -a                       remove modules first, then insert modules"
+        echo "    -sensor sensor_name      config sensor type [default: ar0230]"
+        echo "    -osmem os_mem_size       config os mem size [unit: M, default: 32]"
+        echo "    -total_mem_size          config total mem size [unit: M, default: 64]"
+        echo "    -offline                 vi/vpss offline"
+        echo "    -h                       help information"
+        echo -e "Available sensors: imx222 9m034 ov9752 ar0230 ar0130 ov9712 mn34222"
+        echo -e "notes: osmem option can't be used when mmz zone partition is enable\n\n"
+        echo -e "for example online:   ./load3518e -a -sensor ar0230 -osmem 32 -total 64\n"
+        echo -e "            offline:  ./load3518e -a -sensor ar0230 -osmem 32 -total 64 -offline\n"
+}
+
+calc_mmz_info() {
+        mmz_start=$(echo "$mem_start $os_mem_size" |
+                awk 'BEGIN { temp = 0; }
+        {
+                temp = $1/1024/1024 + $2;
+        }
+    END { printf("0x%x00000\n", temp); }')
+
+        mmz_size=$(echo "$mem_total $os_mem_size" |
+                awk 'BEGIN { temp = 0; }
+        {
+                temp = $1 - $2;
+        }
+    END { printf("%dM\n", temp); }')
+        echo "mmz_start: $mmz_start, mmz_size: $mmz_size"
+}
+
+######################parse arg###################################
+b_arg_os_mem=0
+b_arg_total_mem=0
+b_arg_sensor=0
+b_arg_insmod=0
+b_arg_remove=0
+b_arg_online=1
+
+for arg in $@; do
+        if [ $b_arg_total_mem -eq 1 ]; then
+                b_arg_total_mem=0
+                mem_total=$arg
+
+                if [ -z $mem_total ]; then
+                        echo "[error] mem_total is null"
+                        exit
+                fi
+        fi
+
+        if [ $b_arg_os_mem -eq 1 ]; then
+                b_arg_os_mem=0
+                os_mem_size=$arg
+
+                if [ -z $os_mem_size ]; then
+                        echo "[error] os_mem_size is null"
+                        exit
+                fi
+        fi
+
+        if [ $b_arg_sensor -eq 1 ]; then
+                b_arg_sensor=0
+                SENSOR=$arg
+        fi
+
+        case $arg in
+        "-i")
+                b_arg_insmod=1
+                ;;
+        "-r")
+                b_arg_remove=1
+                ;;
+        "-a")
+                b_arg_insmod=1
+                b_arg_remove=1
+                ;;
+        "-h")
+                load_usage
+                ;;
+        "-sensor")
+                b_arg_sensor=1
+                ;;
+        "-osmem")
+                b_arg_os_mem=1
+                ;;
+        "-total")
+                b_arg_total_mem=1
+                ;;
+        "-offline")
+                b_arg_online=0
+                ;;
+        esac
+done
+#######################parse arg end########################
+
+if [ $os_mem_size -ge $mem_total ]; then
+        echo "[err] os_mem[$os_mem_size], over total_mem[$mem_total]"
+        exit
+fi
+
+calc_mmz_info
+
+#######################Action###############################
+
+if [ $# -lt 1 ]; then
+        load_usage
+        exit 0
+fi
+
+# Sensor config
+# SENSOR=${SENSOR:=imx307}
+#
+
+if [ -n "$SENSOR" ]; then
+        logger -s -p daemon.info -t hisilicon "Manualy set SENSOR as ${SENSOR}"
+else
+        if fw_printenv -n sensor >/dev/null; then
+                SENSOR_ENV=$(fw_printenv -n sensor)
+                export SENSOR=${SENSOR_ENV}
+                logger -s -p daemon.info -t hisilicon "Get data from environment and set SENSOR as ${SENSOR}"
+        else
+                insert_detect
+                SENSOR_DETECT=$(ipcinfo -s)
+                export SENSOR=${SENSOR_DETECT:=unknown}
+                remove_detect
+                logger -s -p daemon.info -t hisilicon "Get data from ipcinfo and set SENSOR as ${SENSOR}"
+                fw_setenv sensor $SENSOR && logger -s -p daemon.info -t hisilicon "Write detected ${SENSOR} to U-Boot ENV"
+        fi
+fi
+
+if [ $b_arg_remove -eq 1 ]; then
+        remove_ko
+fi
+
+if [ "$SENSOR" = "unknown" ]; then
+        exit 1
+else
+        if [ $b_arg_insmod -eq 1 ]; then
+                cd /lib/modules/4.9.37/hisilicon
+                insert_ko
+        fi
+fi

general/package/hisilicon-osdrv-hi3516av100/files/script/set_allocator

@@ -0,0 +1,48 @@
+#!/bin/sh
+
+
+get_env() {
+  bootargs=$(fw_printenv -n bootargs)
+  mem=$(echo ${bootargs} | awk -F '=' '$1=="mem"{print $2}' RS=' ')
+  console=$(echo ${bootargs} | awk -F '=' '$1=="console"{print $2}' RS=' ')
+  panic=$(echo ${bootargs} | awk -F '=' '$1=="panic"{print $2}' RS=' ')
+  rootfstype=$(echo ${bootargs} | awk -F '=' '$1=="rootfstype"{print $2}' RS=' ')
+  root=$(echo ${bootargs} | awk -F '=' '$1=="root"{print $2}' RS=' ')
+  init=$(echo ${bootargs} | awk -F '=' '$1=="init"{print $2}' RS=' ')
+  mtdparts=$(echo ${bootargs} | awk -F '=' '$1=="mtdparts"{print $2}' RS=' ')
+  osmem=$(fw_printenv -n osmem)
+  totalmem=$(fw_printenv -n totalmem)
+}
+
+calc_mmz() {
+  mem_start=0x40000000
+  mem_total=$(fw_printenv -n totalmem | tr -d 'M')
+  mem_total=${mem_total:=64}
+  os_mem_size=$(fw_printenv -n osmem | tr -d 'M')
+  os_mem_size=${os_mem_size:=32}
+  mmz_start=$(echo "$mem_start $os_mem_size" | awk 'BEGIN { temp = 0; } { temp = $1/1024/1024 + $2; } END { printf("0x%x00000\n", temp); }')
+  mmz_size=$(echo "$mem_total $os_mem_size" | awk 'BEGIN { temp = 0; } { temp = $1 - $2; } END { printf("%dM\n", temp); }')
+  mmz=anonymous,0,$mmz_start,$mmz_size
+}
+
+
+if [[ "$1" == 'hisi' ]]; then
+  echo "Allocator selected as hisi..."
+  get_env
+  mem=${osmem:=32M}
+  newbootargs="mem=${mem} console=${console} panic=${panic} rootfstype=${rootfstype} root=${root} init=${init} mtdparts=${mtdparts} mmz_allocator=hisi"
+  echo ${newbootargs}
+  fw_setenv bootargs ${newbootargs}
+  #
+elif [[ "$1" == 'cma'  ]]; then
+  echo "Allocator selected as cma..."
+  get_env
+  calc_mmz
+  mem=${totalmem:=64M}
+  newbootargs="mem=${mem} console=${console} panic=${panic} rootfstype=${rootfstype} root=${root} init=${init} mtdparts=${mtdparts} mmz_allocator=cma mmz=${mmz}"
+  fw_setenv bootargs ${newbootargs}
+  echo ${newbootargs}
+else
+  echo "NO or WRONG allocator, please select hisi or cma."
+  exit 1
+fi

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/gc2053_i2c_1080p.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsGc2053Obj       ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_gc2053.so         ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 1                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=25
+Isp_Bayer  =0   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=1920  ;
+DevRect_h=1080  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll 

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/imx307_i2c_2l_1080p.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsImx307_2l_Obj       ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_imx307_2l.so         ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 12
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 2                        	;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=25
+Isp_Bayer  =0   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+		; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+		; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+		; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+		; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+		; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+		; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+		; VI_MODE_MIPI,                   /* MIPI RAW mode */
+		; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+		; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+		; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+		; VI_MODE_LVDS,                   /* LVDS mode */
+		; VI_MODE_HISPI,                  /* HiSPi mode */
+		; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=1920  ;
+DevRect_h=1080  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/imx335_i2c_4M.ini

@@ -0,0 +1,114 @@
+[sensor]
+Sensor_type   =stSnsImx335Obj           ;sensor name
+Mode          = WDR_MODE_NONE
+DllFile   = /usr/lib/sensors/libsns_imx335.so            ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 2                        	;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|1|2|3|-1|-1|-1|-1|          ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =2592
+Isp_H      =1520
+Isp_FrameRate=25
+Isp_Bayer  =0   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+
+[vi_dev]
+Input_mod    = VI_MODE_MIPI
+Work_mod     = VI_WORK_MODE_1Multiplex
+Mask_num     = 2
+Mask_0       = 0xFFF00000
+Mask_1       = 0x0
+Scan_mode    = VI_SCAN_PROGRESSIVE
+Data_seq     = VI_DATA_SEQ_YUYV
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1280  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =720  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_w=2592  ;
+DevRect_h=1520  ;
+DevRect_x=200   ;
+DevRect_y=20    ;
+
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=2592
+CapRect_Height=1520
+DestSize_Width=2592
+DestSize_Height=1520
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/sc2231_i2c_1080p.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsSc2231Obj       ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_sc2231.so         ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 1                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=25
+Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=1920  ;
+DevRect_h=1080  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll 

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/sc2232h_i2c_1080p.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsSc2232hObj       ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_sc2232h.so         ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 12
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 2                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=25
+Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=1920  ;
+DevRect_h=1080  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/sc2239_i2c_1080p.ini

@@ -0,0 +1,148 @@
+[sensor]
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile = /usr/lib/sensors/libsns_sc2239.so
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 1                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|-1|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=20
+Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=1920  ;
+DevRect_h=1080  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/sc2315e_i2c_1080p.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsSc2235Obj           ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_sc2315e_experimental.so ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 1                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=25
+Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=1920  ;
+DevRect_h=1080  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/sc3235_i2c_3M.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsSc3235Obj       ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_sc3235.so         ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 1                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =2304
+Isp_H      =1296
+Isp_FrameRate=20
+Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =2304  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1296  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=2304  ;
+DevRect_h=1296  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=2304
+CapRect_Height=1296
+DestSize_Width=2304
+DestSize_Height=1296
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll 

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/sc4236_i2c_3M.ini

@@ -0,0 +1,149 @@
+[sensor]
+Sensor_type   =stSnsSc4236Obj       ;sensor name
+Mode          =0                        ;WDR_MODE_NONE = 0
+                                        ;WDR_MODE_BUILT_IN = 1
+                                        ;WDR_MODE_QUDRA = 2
+                                        ;WDR_MODE_2To1_LINE = 3
+                                        ;WDR_MODE_2To1_FRAME = 4
+                                        ;WDR_MODE_2To1_FRAME_FULL_RATE = 5
+                                        ;WDR_MODE_3To1_LINE = 6
+                                        ;WDR_MODE_3To1_FRAME = 7
+                                        ;WDR_MODE_3To1_FRAME_FULL_RATE = 8
+                                        ;WDR_MODE_4To1_LINE = 9
+                                        ;WDR_MODE_4To1_FRAME = 10
+                                        ;WDR_MODE_4To1_FRAME_FULL_RATE = 11
+DllFile   = /usr/lib/sensors/libsns_sc4236.so         ;sensor lib path
+
+
+[mode]
+input_mode =0                           ;INPUT_MODE_MIPI = 0
+                                        ;INPUT_MODE_SUBLVDS = 1
+                                        ;INPUT_MODE_LVDS = 2 ...etc
+
+raw_bitness = 10
+
+[mipi]
+;----------only for mipi_dev---------
+data_type = 1                           ;raw data type: 8/10/12/14 bit
+                                        ;DATA_TYPE_RAW_8BIT = 0,
+                                        ;DATA_TYPE_RAW_10BIT,
+                                        ;DATA_TYPE_RAW_12BIT,
+                                        ;DATA_TYPE_RAW_14BIT,
+                                        ;DATA_TYPE_RAW_16BIT,
+                                        ;DATA_TYPE_YUV420_8BIT_NORMAL,
+                                        ;DATA_TYPE_YUV420_8BIT_LEGACY,
+                                        ;DATA_TYPE_YUV422_8BIT,
+lane_id = 0|1|-1|-1|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =2304
+Isp_H      =1296
+Isp_FrameRate=20
+Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3
+
+[vi_dev]
+Input_mod = 6
+                ; VI_MODE_BT656 = 0,              /* ITU-R BT.656 YUV4:2:2 */
+                ; VI_MODE_BT656_PACKED_YUV,       /* ITU-R BT.656 packed YUV4:2:2 */
+                ; VI_MODE_BT601,                  /* ITU-R BT.601 YUV4:2:2 */
+                ; VI_MODE_DIGITAL_CAMERA,         /* digatal camera mode */
+                ; VI_MODE_BT1120_STANDARD,        /* BT.1120 progressive mode */
+                ; VI_MODE_BT1120_INTERLEAVED,     /* BT.1120 interstage mode */
+                ; VI_MODE_MIPI,                   /* MIPI RAW mode */
+                ; VI_MODE_MIPI_YUV420_NORMAL,     /* MIPI YUV420 normal mode */
+                ; VI_MODE_MIPI_YUV420_LEGACY,     /* MIPI YUV420 legacy mode */
+                ; VI_MODE_MIPI_YUV422,            /* MIPI YUV422 mode */
+                ; VI_MODE_LVDS,                   /* LVDS mode */
+                ; VI_MODE_HISPI,                  /* HiSPi mode */
+                ; VI_MODE_SLVS,                   /* SLVS mode */
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=1      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =2304  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1296  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+
+;----- only for bt656 ----------
+FixCode   =0    ;BT656_FIXCODE_1 = 0,
+                ;BT656_FIXCODE_0
+FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
+                ;BT656_FIELD_POLAR_NSTD
+DataPath  =1    ;ISP enable or bypass
+                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
+                ;VI_PATH_ISP       = 1,/* ISP enable */
+                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200     ;
+DevRect_y=20    ;
+DevRect_w=2304  ;
+DevRect_h=1296  ;
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=2304
+CapRect_Height=1296
+DestSize_Width=2304
+DestSize_Height=1296
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll 

general/package/hisilicon-osdrv-hi3516av100/hisilicon-osdrv-hi3516av100.mk

@@ -0,0 +1,41 @@
+################################################################################
+#
+# hisilicon-osdrv-hi3516av100
+#
+################################################################################
+
+HISILICON_OSDRV_HI3516AV100_VERSION =
+HISILICON_OSDRV_HI3516AV100_SITE =
+HISILICON_OSDRV_HI3516AV100_LICENSE = MIT
+HISILICON_OSDRV_HI3516AV100_LICENSE_FILES = LICENSE
+
+
+define HISILICON_OSDRV_HI3516AV100_INSTALL_TARGET_CMDS
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/script/S99hisilicon
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/sensor/config/*.ini
+
+	#$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors/WDR
+	#$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors/WDR $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/sensor/config/WDR/*.ini
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/lib/modules/4.9.37/hisilicon
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/4.9.37/hisilicon $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/kmod/*.ko
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/script/load_hisilicon
+	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/script/ircut_demo
+	#$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/script/set_allocator
+
+	#$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/fonts
+	#$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/fonts $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/fonts/*.bin
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/sensor/*.so
+
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib
+	$(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_HISILICON_PATH)/package/hisilicon-osdrv-hi3516av100/files/lib/*.so
+endef
+
+$(eval $(generic-package))

general/package/majestic-hi3516av100/Config.in

@@ -0,0 +1,7 @@
+config BR2_PACKAGE_MAJESTIC_HI3516AV100
+	bool "Tiny but powerful IPC streaming software"
+	default n
+	help
+	  Tiny but powerful IPC streaming software
+
+	  https://openipc.org