Add IMX185 config for Hi3516Av100

general/package/hisilicon-osdrv-hi3516av100/files/sensor/config/imx185_i2c_1080p.ini

@@ -0,0 +1,106 @@
+[sensor]
+Sensor_type=imx185
+Mode=WDR_MODE_NONE
+DllFile=/usr/lib/sensors/libsns_imx185.so
+
+[mode]
+input_mode=INPUT_MODE_MIPI
+dev_attr=0
+
+[mipi]
+data_type=RAW_DATA_12BIT
+lane_id = 0|1|2|3|-1|-1|-1|-1|      ;lane_id: -1 - disable
+
+[isp_image]
+Isp_x      =0
+Isp_y      =0
+Isp_W      =1920
+Isp_H      =1080
+Isp_FrameRate=25
+Isp_Bayer=BAYER_RGGB
+
+[vi_dev]
+Input_mod=VI_MODE_MIPI
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFFF00000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     =2 ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =1      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=0      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+FixCode=0
+FieldPolar=0
+DataPath=1
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=6
+DevRect_y=0
+DevRect_w=1920
+DevRect_h=1080
+
+[vi_chn]
+CapRect_X    =0
+CapRect_Y    =0
+CapRect_Width=1920
+CapRect_Height=1080
+DestSize_Width=1920
+DestSize_Height=1080
+CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
+                ;VI_CAPSEL_TOP = 0,                  /* top field */
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+
+PixFormat    =23;PIXEL_FORMAT_YUV_SEMIPLANAR_422 = 22
+                ;PIXEL_FORMAT_YUV_SEMIPLANAR_420 = 23 ...etc
+CompressMode =0 ;COMPRESS_MODE_NONE = 0
+                ;COMPRESS_MODE_SEG =1 ...etc
+
+SrcFrameRate=-1 ;Source frame rate. -1: not controll
+FrameRate   =-1 ;Target frame rate. -1: not controll