Overlay: update wireless-settings

general/overlay/etc/init.d/S30wireless

@@ -3,10 +3,10 @@ device=$(fw_printenv -n wlandevice)
 
 if [ "$1" = "start" ] && [ ! -z "$device" ]; then
 	if /etc/wireless "$device"; then
-		sed -i "s|^auto|#auto|g" /etc/network/interfaces.d/eth0
-		sed -i "s|^#auto|auto|g" /etc/network/interfaces.d/wlan0
+		sed -i "s/^auto/#auto/g" /etc/network/interfaces.d/eth0
+		sed -i "s/^#auto/auto/g" /etc/network/interfaces.d/wlan0
 	else
-		sed -i "s|^#auto|auto|g" /etc/network/interfaces.d/eth0
-		sed -i "s|^auto|#auto|g" /etc/network/interfaces.d/wlan0
+		sed -i "s/^#auto/auto/g" /etc/network/interfaces.d/eth0
+		sed -i "s/^auto/#auto/g" /etc/network/interfaces.d/wlan0
 	fi
 fi

general/overlay/etc/network/interfaces.d/wlan0

@@ -1,6 +1,6 @@
 #auto wlan0
 iface wlan0 inet dhcp
-    post-up wpa_passphrase $(fw_printenv -n wlanssid || echo openipc) $(fw_printenv -n wlanpass || echo openipc12345) > /etc/wpa_supplicant.conf
-    post-up sed -i '2i \\tscan_ssid=1' /etc/wpa_supplicant.conf
-    post-up wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf
+    post-up wpa_passphrase "$(fw_printenv -n wlanssid || echo OpenIPC)" "$(fw_printenv -n wlanpass || echo OpenIPC12345)" > /tmp/wpa_supplicant.conf
+    post-up sed -i '2i \\tscan_ssid=1' /tmp/wpa_supplicant.conf
+    post-up wpa_supplicant -B -i wlan0 -D nl80211,wext -c /tmp/wpa_supplicant.conf
     post-down killall -q wpa_supplicant

general/overlay/etc/wireless

@@ -1,12 +1,16 @@
 #!/bin/sh
 
+set_gpio() {
+	echo $1 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio$1/direction
+	echo $2 > /sys/class/gpio/gpio$1/value
+	sleep 1
+}
+
 # HI3516EV300 CamHi
 if [ "$1" = "mt7601u-hi3516ev300-camhi" ]; then
 	devmem 0x100C0080 32 0x530
-	echo 7 > /sys/class/gpio/export
-	echo out > /sys/class/gpio/gpio7/direction
-	echo 0 > /sys/class/gpio/gpio7/value
-	sleep 1
+	set_gpio 7 0
 	modprobe mt7601u
 	exit 0
 fi
@@ -19,22 +23,30 @@ fi
 
 # SSC337DE Foscam
 if [ "$1" = "8188fu-ssc337de-foscam" ]; then
-	echo 15 > /sys/class/gpio/export
-	echo out > /sys/class/gpio/gpio15/direction
-	echo 0 > /sys/class/gpio/gpio15/value
-	sleep 1
+	set_gpio 15 0
 	modprobe 8188fu
 	exit 0
 fi
 
 # T21 BJS
 if [ "$1" = "8188fu-t21-bjs" ]; then
-	echo 50 > /sys/class/gpio/export
-	echo out > /sys/class/gpio/gpio50/direction
-	echo 0 > /sys/class/gpio/gpio50/value
-	sleep 1
+	set_gpio 50 0
 	modprobe 8188fu
 	exit 0
 fi
 
+# T21 Smartwares
+if [ "$1" = "8188fu-t21-smartwares" ]; then
+	set_gpio 49 1
+	modprobe 8188fu
+	exit 0
+fi
+
+# T31 CamHi
+if [ "$1" = "mt7601u-t31-camhi" ]; then
+	set_gpio 61 0
+	modprobe mac80211
+	exit 0
+fi
+
 exit 1