Added support for SOI F23 DC sensor (#1110)

Co-authored-by: Yuuki Hogo <yuuki@yandex.ru>

general/package/goke-osdrv-gk7205v200/files/script/load_goke

@@ -161,7 +161,7 @@ insert_isp_piris() {
 }
 
 insert_ko() {
-	if [ "$SENSOR" == "bt656" ]; then
+	if [ "$SENSOR" == "bt656" ] || [ "$SENSOR" == "jxf23_dc" ]; then
 		YUV_TYPE0=1
 	fi
 	modprobe open_sys_config chip=$CHIP_TYPE sensors=$SENSOR g_cmos_yuv_flag=$YUV_TYPE0 board=$BOARD

general/package/goke-osdrv-gk7205v200/files/sensor/config/jxf23_i2c_dc_1080p.ini

@@ -0,0 +1,98 @@
+[sensor]
+Sensor_type=stSnsSoiSensorObj
+Mode=WDR_MODE_NONE
+DllFile=libsns_f23_dc.so
+
+[mode]
+input_mode=INPUT_MODE_CMOS
+raw_bitness=10
+
+[mipi]
+lane_id = 0|2|-1|-1|-1|-1|-1|-1|        ;lane_id: -1 - disable
+
+[isp_image]
+Isp_FrameRate=25
+Isp_Bayer=BAYER_BGGR
+
+[vi_dev]
+Input_mod=VI_MODE_DIGITAL_CAMERA
+Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
+                ;VI_WORK_MODE_2Multiplex,
+                ;VI_WORK_MODE_4Multiplex
+Combine_mode =0 ;Y/C composite or separation mode
+                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
+                ;VI_COMBINE_SEPARATE,     /*Separate mode */
+Comp_mode    =0 ;Component mode (single-component or dual-component)
+                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
+                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
+Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
+                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
+                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
+Mask_num     =2 ;Component mask
+Mask_0       =0xFF300000
+Mask_1       =0x0
+Scan_mode    = 1;VI_SCAN_INTERLACED = 0
+                ;VI_SCAN_PROGRESSIVE,
+Data_seq     = VI_DATA_SEQ_YUYV ;data sequence (ONLY for YUV format)
+                ;----2th component U/V sequence in bt1120
+                ;    VI_INPUT_DATA_VUVU = 0,
+                ;    VI_INPUT_DATA_UVUV,
+                ;----input sequence for yuv
+                ;    VI_INPUT_DATA_UYVY = 0,
+                ;    VI_INPUT_DATA_VYUY,
+                ;    VI_INPUT_DATA_YUYV,
+                ;    VI_INPUT_DATA_YVYU
+
+Vsync   =0      ; vertical synchronization signal
+                ;VI_VSYNC_FIELD = 0,
+                ;VI_VSYNC_PULSE,
+VsyncNeg=0      ;Polarity of the vertical synchronization signal
+                ;VI_VSYNC_NEG_HIGH = 0,
+                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
+Hsync  =0       ;Attribute of the horizontal synchronization signal
+                ;VI_HSYNC_VALID_SINGNAL = 0,
+                ;VI_HSYNC_PULSE,
+HsyncNeg =0     ;Polarity of the horizontal synchronization signal
+                ;VI_HSYNC_NEG_HIGH = 0,
+                ;VI_HSYNC_NEG_LOW
+VsyncValid =1   ;Attribute of the valid vertical synchronization signal
+                ;VI_VSYNC_NORM_PULSE = 0,
+                ;VI_VSYNC_VALID_SINGAL,
+VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
+                ;VI_VSYNC_VALID_NEG_HIGH = 0,
+                ;VI_VSYNC_VALID_NEG_LOW
+Timingblank_HsyncHfb =0     ;Horizontal front blanking width
+Timingblank_HsyncAct =1920  ;Horizontal effetive width
+Timingblank_HsyncHbb =0     ;Horizontal back blanking width
+Timingblank_VsyncVfb =0     ;Vertical front blanking height
+Timingblank_VsyncVact =1080  ;Vertical effetive width
+Timingblank_VsyncVbb=0      ;Vertical back blanking height
+Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
+Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
+Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)
+InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
+DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
+DevRect_x=200
+DevRect_y=20
+DevRect_w=1920
+DevRect_h=1080
+
+;[vi_chn]                                                                       
+;CapRect_X    =0                                                                
+;CapRect_Y    =0                                                                
+;CapRect_Width=1920                                                             
+;CapRect_Height=1080                                                            
+;DestSize_Width=1920                                                            
+;DestSize_Height=1080                                                           
+;CapSel       =2 ;Frame/field select. ONLY used in interlaced mode              
+                ;VI_CAPSEL_TOP = 0,                  /* top field */           
+                ;VI_CAPSEL_BOTTOM,                   /* bottom field */        
+                ;VI_CAPSEL_BOTH,                     /* top and bottom field */
+                                                                      
+;PixFormat    =26;PIXEL_FORMAT_YVU_SEMIPLANAR_420 = 26 ...etc      
+;CompressMode =0 ;COMPRESS_MODE_NONE = 0                     
+                ;COMPRESS_MODE_SEG =1 ...etc        
+                                                                       
+SrcFrameRate=30 ;Source frame rate. -1: not controll
+FrameRate   =30 ;Target frame rate. -1: not controll
+