[fpv] some modifications (#1139)

general/package/datalink/files/tweaksys

@@ -8,6 +8,18 @@ if ! [ ${chip} = "hi3536dv100" ]; then
     sensor=$(ipcinfo -s)
 fi
 
+basic() {
+  # set boot delay
+  fw_setenv bootdelay 0
+  # don't load f2fs module (disabled in kernel)
+  sed -i "s!f2fs!#f2fs!g" /etc/modules
+  # freely uart for telemetry
+  sed -i "s!console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL!#console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL!g" /etc/inittab
+
+  # tune socket buffer
+  echo "net.core.rmem_default=512000" >> /etc/sysctl.conf
+}
+
 prefix=${family}
 
 hisi_goke() {
@@ -27,6 +39,7 @@ hisi_goke() {
   # change fps 25 -> 30
   sed -i "s!Isp_FrameRate=25!Isp_FrameRate=30!g" /etc/sensors/imx307_i2c_2l_1080p.ini
   sed -i "s!Isp_FrameRate=25!Isp_FrameRate=30!g" /etc/sensors/smtsec_imx307_i2c_4l_1080p.ini
+  sed -i "s!Isp_FrameRate=25!Isp_FrameRate=30!g" /etc/sensors/imx335_i2c_4M.ini
 }
 
 sigmastar() {
@@ -35,49 +48,42 @@ sigmastar() {
 }
 
 majestic_generic() {
-  # majestic basic settings
   cli -s .isp.slowShutter disabled
-  cli -s .isp.drc 350
   # enable digital image stabilization
   # cli -s .isp.dis true
   cli -s .image.contrast 50
   cli -s .image.luminance 50
-  cli -s .video0.bitrate 4096
+  cli -s .video0.size 1920x1080
+  cli -s .video0.fps 30
+  cli -s .video0.bitrate 5120
   cli -s .video0.codec h264
   cli -s .video0.rcMode cbr
-  cli -s .video0.gopSize 1
+  cli -s .video0.gopSize 1.5
-  cli -s .hls.enabled false
-  cli -s .netip.enabled false
-  cli -s .jpeg.enabled false
   # lowdelay support only imx307 sensor
   if [ ${sensor} = "imx307" ]; then
-    cli -s .video0.size 1280x720
-    cli -s .video0.gopSize 0.2
-    # cli -s .video0.fps 30
     cli -s .isp.lowDelay true
     # cli -s .video0.sliceUnits 4
   fi
+  if [ ${sensor} = "imx335" ]; then
+    cli -s .isp.drc 350
+    cli -s .isp.sensorConfig /etc/sensors/imx335_i2c_4M.ini
+  fi
+  cli -s .hls.enabled false
+  cli -s .netip.enabled false
+  cli -s .jpeg.enabled false
 }
 
 majestic_sigmastar() {
   cli -s .isp.exposure 10
   cli -s .isp.aGain 8
   cli -s .isp.dGain 8
+  cli -s .video0.size 1920x1080
   cli -s .video0.fps 90
   cli -s .video0.rcMode cbr
   cli -s .jpeg.enabled false
 }
 
-all_other() {
+streamer() {
-  # set boot delay
-  fw_setenv bootdelay 0
-  # don't load f2fs module (disabled in kernel)
-  sed -i "s!f2fs!#f2fs!g" /etc/modules
-  sed -i "s!console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL!#console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL!g" /etc/inittab
-  if [ -f /usr/bin/mavlink-routerd ]; then
-    # disable mavlink routerd autostart
-    sed -i "s!/usr/bin/mavlink-routerd &!#/usr/bin/mavlink-routerd &!g" /etc/init.d/S97mavlink
-  fi
   if [ -f /usr/bin/majestic ]; then
     if [ ${vendor} = "sigmastar" ]; then
       majestic_sigmastar
@@ -89,15 +95,16 @@ all_other() {
     cli -s .outgoing.server udp://127.0.0.1:5600
   fi
 
-# tune socket buffer
+  if [ -f /usr/bin/venc ]; then
-cat >> /etc/sysctl.conf << EOF
+    if [ ${sensor} = "imx335" ]; then
-net.core.rmem_default=524288
+      sed -i "s!version=200_imx307B!version=300_imx335B!g" /etc/venc.conf
-net.core.rmem_max=2048000
+      sed -i "s!size=720p!size=1292x972!g" /etc/venc.conf
-EOF
+    fi
+  fi
 }
 
 finish() {
-  # complete tweaks
+  # complete tweaks and add marker
   touch /etc/system.ok
   echo "Preparing system done."
   reboot
@@ -124,8 +131,9 @@ case "$1" in
 	# remove unneeded to reduce some memory
 	rm -f /etc/init.d/S60crond /etc/init.d/S49ntpd /etc/init.d/S02klogd
 
+	basic
 	hisi_goke
-	all_other
+	streamer
 	finish
 	;;
   gk7205v300 | hi3516ev300)
@@ -139,30 +147,29 @@ case "$1" in
 		cli -s .isp.sensorConfig /etc/sensors/smtsec_imx307_i2c_4l_1080p.ini
 	fi
 
+	basic
 	hisi_goke
-	all_other
+	streamer
 	finish
 	;;
   t31l | t31n | t31x | t31zx)
 	echo "Preparing system tweaks for ${chip}..."
 
-	all_other
+	basic
+	streamer
+	finish
 	;;
   hi3536dv100)
 	echo "Preparing system tweaks for ${chip}..."
 
-	if [ -f /usr/bin/mavlink-routerd ]; then
-		# disable mavlink routerd autostart
-		sed -i "s!/usr/bin/mavlink-routerd &!#/usr/bin/mavlink-routerd &!g" /etc/init.d/S97mavlink
-	fi
-
 	finish
 	;;
   ssc33x)
 	echo "Preparing system tweaks for ${chip}..."
 
+	basic
 	sigmastar
-	all_other
+	streamer
 	finish
 	;;
 	*)

general/package/mavlink-router/mavlink-router.mk

@@ -45,8 +45,8 @@ define MAVLINK_ROUTER_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc
 	cp $(MAVLINK_ROUTER_PKGDIR)/files/mavlink_$(MAVLINK_ROUTER_UNIT).conf $(TARGET_DIR)/etc/mavlink.conf
 
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
+#	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	cp $(MAVLINK_ROUTER_PKGDIR)/files/S97mavlink $(TARGET_DIR)/etc/init.d
+#	cp $(MAVLINK_ROUTER_PKGDIR)/files/S97mavlink $(TARGET_DIR)/etc/init.d
 endef
 
 $(eval $(generic-package))

general/package/vdec-openipc/files/S98vdec

@@ -11,7 +11,7 @@ fi
 case "$1" in
   start)
     echo "Starting vdec decoder service..."
-    vdec -p ${port} -d ${format} -c ${codec} -m ${mode} --bg-r ${bg_r} --bg-g ${bg_g} --bg-b ${bg_b} --mavlink-port ${mavlink_port} ${osd_variant} > /dev/null 2>&1 &
+    vdec -p ${port} -d ${format} -c ${codec} -m ${mode} --mavlink-port ${mavlink_port} ${osd_variant} ${extra} > /dev/null 2>&1 &
     sleep 3
     if [ ${osd} = "custom" ]; then
 	osd > /dev/null 2>&1 &

general/package/vdec-openipc/files/vdec.conf

@@ -16,6 +16,8 @@ format=frame
 # 1024x768x60  - 1024 x 768  @ 60 fps
 # 1366x768x60  - 1366 x 768  @ 60 fps
 # 1280x1024x60 - 1280 x 1024 @ 60 fps
+# 1600x1200x60 - 1600 x 1200 @ 60 fps
+# 2560x1440x30 - 2560 x 1440 @ 30 fps
 
 mode=720p60
 
@@ -27,8 +29,24 @@ mavlink_port=14750
 
 osd=simple
 
-### Background color components (RGB)
+Extra param (write in one line split by space):
 
-bg_r=30
+#    --ar [mode]        - Aspect ratio mode               (Default: keep)
-bg_g=0
+#      keep             - Keep stream aspect ratio
-bg_b=30
+#      stretch          - Stretch to output resolution
+#      manual           - Manual image size definition
+
+#    --ar-bg-r [Value]  - Fill color red component      (Default: 0)
+#    --ar-bg-g [Value]  - Fill color green component    (Default: 0)
+#    --ar-bg-b [Value]  - Fill color blue component     (Default: 0)
+
+#    --ar-x [Value]     - Image position X
+#    --ar-y [Value]     - Image position Y
+#    --ar-w [Value]     - Image width
+#    --ar-h [Value]     - Image height
+
+#    --bg-r [Value]     - Background color red      (Default: 0)
+#    --bg-g [Value]     - Background color green    (Default: 96)
+#    --bg-b [Value]     - Background color blue     (Default: 0)
+
+extra="--bg-r 30 --bg-g 0 --bg-b 30"

general/package/venc-openipc/files/venc.conf

@@ -7,7 +7,9 @@
 #        300_imx307F  - v300, IMX307, 4-lane MIPI | 1080p | 30  fps only
 #
 #      GK7205v300 / IMX335
-#        300_imx335F  - v300, IMX335, 4-lane MIPI | 4MP   | 30  fps only
+#        300_imx335F4 - v300, IMX335, 4-lane MIPI | 2592x1520  | 25  fps only
+#        300_imx335F5 - v300, IMX335, 4-lane MIPI | 2592x1944  | 25  fps only
+#        300_imx335B  - v300, IMX335, 4-lane MIPI | 1292x972   | 30 / 60  fps only
 
 version=200_imx307B
 

general/package/wifibroadcast/files/drone.key

@@ -0,0 +1 @@
+ЛЗэn<EFBFBD>Єj<EFBFBD><EFBFBD><EFBFBD> љ<C2A0>Ю+м<><D0BC>И G
В_Ђ<5F>Ќ{FФ<>a<EFBFBD>ћp<D19B>tzfш<ц@НkОЕВQSz<53>ЂtЂc

general/package/wifibroadcast/files/gs.key

@@ -0,0 +1 @@
+ÜhCÒ£¿À<C2BF>Ö“dß'ôYà:ïúNZV8”V¡ù¿l3qüÄarÁ@±X"'P#ÊžHYèvõc;ƤSƒŠ^

general/package/wifibroadcast/files/wfb_drone.conf

@@ -2,7 +2,7 @@
 unit=drone
 
 wlan=wlan0
-region=BO
+region=00
 ### By default used channel number, but, you may set freq instead. For ex: 2387M
 channel=14
 frequency=

general/package/wifibroadcast/files/wfb_gs.conf

@@ -2,7 +2,7 @@
 unit=gs
 
 wlan=wlan0
-region=BO
+region=00
 ### By default used channel number, but, you may set freq instead. For ex: 2387M
 channel=14
 frequency=

general/package/wifibroadcast/wifibroadcast.mk

@@ -33,6 +33,9 @@ define WIFIBROADCAST_INSTALL_TARGET_CMDS
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	cp $(WIFIBROADCAST_PKGDIR)/files/wifibroadcast $(TARGET_DIR)/usr/bin
 
+	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc
+	cp $(WIFIBROADCAST_PKGDIR)/files/$(WIFIBROADCAST_UNIT).key $(TARGET_DIR)/etc/$(WIFIBROADCAST_UNIT).key
+
 	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
 	cp $(WIFIBROADCAST_PKGDIR)/files/setmcs $(TARGET_DIR)/usr/bin