Ak3918ev200 codebase is dead, removing until someone will find good SDK (#456)

.github/workflows/matrix_build.yml

@@ -249,9 +249,6 @@ jobs:
           - platform: ak3916ev300
             release: lite
             custom: onlyci
-          - platform: ak3918ev200
-            release: lite
-            custom: onlyci
           - platform: ak3918ev300
             release: lite
             custom: onlyci

br-ext-chip-anyka/Config.in

@@ -1,5 +1,4 @@
 source "$BR2_EXTERNAL_ANYKA_PATH/linux/Config.ext.in"
-source "$BR2_EXTERNAL_ANYKA_PATH/package/anyka-osdrv-ak3918ev200/Config.in"
 source "$BR2_EXTERNAL_ANYKA_PATH/package/anyka_patcher/Config.in"
 source "$BR2_EXTERNAL_ANYKA_PATH/package/aura-httpd/Config.in"
 source "$BR2_EXTERNAL_ANYKA_PATH/package/dropbear-openipc/Config.in"

br-ext-chip-anyka/board/ak3918ev200/kernel/patches/20_fix_gcc8.patch

@@ -1 +0,0 @@
-../../../../../patches/linux/3.4.x/gcc8_err_encountered.patch

br-ext-chip-anyka/configs/unknown_unknown_ak3918ev200_openipc_defconfig

@@ -1,103 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm926t=y
-BR2_ARM_EABI=y
-# BR2_ARM_INSTRUCTIONS_THUMB is not set
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.4.35"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_4=y
-
-# Toolchain
-BR2_PER_PACKAGE_DIRECTORIES=y
-BR2_GCC_VERSION_8_X=y
-# BR2_TOOLCHAIN_USES_UCLIBC is not set
-# BR2_TOOLCHAIN_BUILDROOT_UCLIBC is not set
-# BR2_TOOLCHAIN_BUILDROOT_LIBC="uclibc"
-BR2_TOOLCHAIN_USES_MUSL=y
-BR2_TOOLCHAIN_BUILDROOT_MUSL=y
-BR2_TOOLCHAIN_BUILDROOT_LIBC="musl"
-BR2_TOOLCHAIN_BUILDROOT_CXX=y
-BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
-BR2_TOOLCHAIN_BUILDROOT_USE_SSP=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.4.35"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_ANYKA_PATH)/board/ak3918ev200/kernel/ak3918ev200.generic.config"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_XZ=y
-BR2_LINUX_KERNEL_EXT_ANYKA_PATCHER=y
-BR2_LINUX_KERNEL_EXT_ANYKA_PATCHER_LIST="$(BR2_EXTERNAL_ANYKA_PATH)/board/ak3918ev200/kernel/patches/ $(BR2_EXTERNAL_ANYKA_PATH)/board/ak3918ev200/kernel/overlay"
-
-# Filesystem
-# BR2_TARGET_TZ_INFO is not set
-BR2_TARGET_ROOTFS_CPIO=y
-BR2_TARGET_ROOTFS_SQUASHFS=y
-BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
-BR2_ROOTFS_OVERLAY="$(TOPDIR)/../general/overlay"
-BR2_ROOTFS_POST_BUILD_SCRIPT="$(TOPDIR)/../scripts/executing_commands_for_$(BR2_TOOLCHAIN_BUILDROOT_LIBC).sh"
-
-# OpenIPC configuration
-BR2_TOOLCHAIN_BUILDROOT_VENDOR="openipc"
-BR2_TARGET_GENERIC_ISSUE="Welcome to OpenIPC v2.2"
-BR2_TARGET_GENERIC_HOSTNAME="openipc-ak3918ev200"
-BR2_GLOBAL_PATCH_DIR="$(TOPDIR)/../general/package/all-patches"
-
-# OpenIPC packages
-BR2_PACKAGE_BUSYBOX_CONFIG="$(TOPDIR)/../general/package/busybox/busybox.config"
-BR2_PACKAGE_DROPBEAR_OPENIPC=y
-# BR2_PACKAGE_FDK_AAC_OPENIPC is not set
-BR2_PACKAGE_FWPRINTENV_OPENIPC=y
-BR2_PACKAGE_HASERL=y
-# BR2_PACKAGE_ANYKA_GPIO is not set
-# BR2_PACKAGE_ANYKA_OSDRV_AK3918EV300 is not set
-BR2_PACKAGE_IPCTOOL=y
-BR2_PACKAGE_JSON_C=y
-BR2_PACKAGE_LAME_OPENIPC=y
-BR2_PACKAGE_LIBCURL_OPENIPC=y
-BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
-# BR2_PACKAGE_LIBCURL_OPENIPC_VERBOSE is not set
-# BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT is not set
-# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
-# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
-BR2_PACKAGE_LIBCURL_OPENIPC_MBEDTLS=y
-BR2_PACKAGE_LIBEVENT_OPENIPC=y
-BR2_PACKAGE_LIBEVENT_OPENIPC_REMOVE_PYSCRIPT=y
-BR2_PACKAGE_LIBOGG_OPENIPC=y
-BR2_PACKAGE_LIBWEBSOCKETS_OPENIPC=y
-BR2_PACKAGE_LIBYAML=y
-BR2_PACKAGE_MAJESTIC_FONTS=y
-# BR2_PACKAGE_MAJESTIC=y
-BR2_PACKAGE_MBEDTLS_OPENIPC=y
-# BR2_PACKAGE_MBEDTLS_OPENIPC_PROGRAMS is not set
-# BR2_PACKAGE_MBEDTLS_OPENIPC_COMPRESSION is not set
-BR2_PACKAGE_MICROBE_WEB=y
-# BR2_PACKAGE_MINI_SNMPD is not set
-BR2_PACKAGE_MOTORS=y
-BR2_PACKAGE_OPUS_OPENIPC=y
-BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
-# BR2_PACKAGE_SSHPASS is not set
-BR2_PACKAGE_UACME_OPENIPC=y
-BR2_PACKAGE_VTUND_OPENIPC=y
-BR2_PACKAGE_YAML_CLI=y
-
-# WiFi
-BR2_PACKAGE_WIRELESS_TOOLS=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
-BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
-BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC=y
-BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC_MT7601U=y
-BR2_PACKAGE_LINUX_FIRMWARE_OPENIPC_RTL8188EU=y
-# BR2_PACKAGE_RTL8188EU is not set
-
-# WIREGUARD
-BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
-BR2_PACKAGE_WIREGUARD_TOOLS=y
-
-# DEBUG
-BR2_PACKAGE_HOST_GDB=y
-BR2_PACKAGE_GDB=y

br-ext-chip-anyka/package/anyka-osdrv-ak3918ev200

@@ -1 +0,0 @@
-../../general/package/anyka-osdrv-ak3918ev200

building.sh

@@ -160,7 +160,6 @@ autoup_rootfs() {
 FUNCS=(
   ambarella-s3l
 
-  ak3918ev200
   ak3916ev300
   ak3918ev300
 

general/package/anyka-osdrv-ak3918ev200/Config.in

@@ -1,6 +0,0 @@
-config BR2_PACKAGE_ANYKA_OSDRV_AK3918EV200
-	bool "anyka-osdrv-ak3918ev200"
-	help
-	  anyka-osdrv-ak3918ev200 - Anyka kernel modules and libs
-
-	  https://openipc.org

general/package/anyka-osdrv-ak3918ev200/anyka-osdrv-ak3918ev200.mk

@@ -1,34 +0,0 @@
-################################################################################
-#
-# anyka-osdrv-ak3918ev200
-#
-################################################################################
-
-ANYKA_OSDRV_AK3918EV200_VERSION =
-ANYKA_OSDRV_AK3918EV200_SITE =
-ANYKA_OSDRV_AK3918EV200_LICENSE = MIT
-ANYKA_OSDRV_AK3918EV200_LICENSE_FILES = LICENSE
-
-define ANYKA_OSDRV_AK3918EV200_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/script/S95anyka
-
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/etc/sensors
-	$(INSTALL) -m 644 -t $(TARGET_DIR)/etc/sensors $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/sensor/config/*.conf
-
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/lib/modules/3.4.35/anyka
-	$(INSTALL) -m 644 -t $(TARGET_DIR)/lib/modules/3.4.35/anyka $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/kmod/*.ko
-
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/bin
-	$(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/script/load_anyka
-	# $(INSTALL) -m 755 -t $(TARGET_DIR)/usr/bin $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/script/ircut_demo
-
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib/sensors
-	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/sensors $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/sensor/*.so
-
-	$(INSTALL) -m 755 -d $(TARGET_DIR)/usr/lib
-
-	# $(INSTALL) -m 644 -t $(TARGET_DIR)/usr/lib/ $(BR2_EXTERNAL_ANYKA_PATH)/package/anyka-osdrv-ak3918ev200/files/lib/xxx.so
-endef
-
-$(eval $(generic-package))

general/package/anyka-osdrv-ak3918ev200/files/script/S95anyka

@@ -1,78 +0,0 @@
-#!/bin/sh
-
-DAEMON="majestic"
-PIDFILE="/var/run/$DAEMON.pid"
-
-DAEMON_ARGS="-s"
-
-# shellcheck source=/dev/null
-[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
-
-load_majestic() {
-	printf 'Starting %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	# shellcheck disable=SC2086 # we need the word splitting
-	[ -f /etc/coredump.conf ] && . /etc/coredump.conf
-	if [ "$coredump_enabled" ]; then
-		[ "$(yaml-cli -i /etc/majestic.yaml -g .watchdog.timeout)" -lt "30" ] && yaml-cli -i /etc/majestic.yaml -s .watchdog.timeout 30
-		ulimit -c unlimited && echo "|/usr/sbin/sendcoredump.sh" >/proc/sys/kernel/core_pattern
-	fi
-	start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
-		-- $DAEMON_ARGS
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-# The daemon does not create a pidfile, and use "-m" to instruct start-stop-daemon to create one.
-start() {
-	logger -s -p daemon.info -t anyka "Check MAC for Xiongmai devices"
-	if [ "$(fw_printenv -n ethaddr)" = "00:00:23:34:45:66" ]; then
-		logger -s -p daemon.info -t anyka "The eth0 interface has a lousy MAC, let's try to change it.."
-		XMMAC="$(ipcinfo --xm-mac)" && [ -n "${XMMAC}" ] && fw_setenv ethaddr ${XMMAC} && reboot -f || logger -s -p daemon.info -t anyka "It is not possible to install a new MAC on the eth0 interface.."
-	else
-		logger -s -p daemon.info -t anyka "The eth0 interface has a correct MAC - $(fw_printenv -n ethaddr)"
-	fi
-	#
-	logger -s -p daemon.info -t anyka "Loading of kernel modules and initialization of the video system has started"
-	export TZ=$(cat /etc/TZ)
-	#load_anyka
-	#
-	#load_majestic
-}
-
-stop() {
-	printf 'Stopping %s: ' "$DAEMON"
-	[ -f /usr/bin/$DAEMON ] || echo -en "DISABLED, "
-	start-stop-daemon -K -q -p "$PIDFILE"
-	status=$?
-	if [ "$status" -eq 0 ]; then
-		rm -f "$PIDFILE"
-		echo "OK"
-	else
-		echo "FAIL"
-	fi
-	return "$status"
-}
-
-restart() {
-	stop
-	sleep 1
-	reload
-}
-
-reload() {
-	load_majestic
-}
-
-case "$1" in
-	start|stop|restart|reload)
-		"$1";;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload}"
-		exit 1
-esac

general/package/anyka-osdrv-ak3918ev200/files/script/ircut_demo

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-# on EV200:
-# GPIO1_0 -> GPIO8 (1*8+0 = 8)
-# GPIO1_1 -> GPIO9 (1*8+1 = 9)
-
-# on EV300:
-# GPIO1_3 -> GPIO11
-# GPIO1_2 -> GPIO10
-
-#(normal mode)
-ir_cut_enable() {
-  # pin_mux
-  echo "$gpio_0" >/sys/class/gpio/unexport
-  echo "$gpio_1" >/sys/class/gpio/unexport
-  echo "$gpio_0" >/sys/class/gpio/export
-  echo "$gpio_1" >/sys/class/gpio/export
-
-  # dir
-  echo "out" >/sys/class/gpio/gpio$gpio_0/direction
-  echo "out" >/sys/class/gpio/gpio$gpio_1/direction
-
-  # data, gpio_1: 0, gpio_0: 1  (normal mode)
-  echo "1" >/sys/class/gpio/gpio$gpio_0/value
-  echo "0" >/sys/class/gpio/gpio$gpio_1/value
-
-  #sleep 1s
-  sleep 1
-
-  # back to original
-  echo "0" >/sys/class/gpio/gpio$gpio_0/value
-  echo "0" >/sys/class/gpio/gpio$gpio_1/value
-}
-
-# (ir mode)
-ir_cut_disable() {
-  # pin_mux
-  echo "$gpio_0" >/sys/class/gpio/unexport
-  echo "$gpio_1" >/sys/class/gpio/unexport
-  echo "$gpio_0" >/sys/class/gpio/export
-  echo "$gpio_1" >/sys/class/gpio/export
-
-  # dir
-  echo "out" >/sys/class/gpio/gpio$gpio_0/direction
-  echo "out" >/sys/class/gpio/gpio$gpio_1/direction
-
-  # data, gpio_1: 1, gpio_0: 0  (ir mode)
-  echo "0" >/sys/class/gpio/gpio$gpio_0/value
-  echo "1" >/sys/class/gpio/gpio$gpio_1/value
-
-  #sleep 1s
-  sleep 1
-
-  # back to original
-  echo "0" >/sys/class/gpio/gpio$gpio_0/value
-  echo "0" >/sys/class/gpio/gpio$gpio_1/value
-}
-
-gpio_0=0
-gpio_1=0
-
-if [ $# -lt 2 ]; then
-  echo "usage : ./ircut_demo <chip> <mode>"
-  echo "for example:"
-  echo "ir mode : ./ircut_demo hi3516ev200 1"
-else
-  if [ $1 = "hi3516ev200" ]; then
-    gpio_0=8
-    gpio_1=9
-  elif [ $1 = "hi3516ev300" ]; then
-    gpio_0=11
-    gpio_1=10
-  else
-    echo "wrong chipid: $1, please select: hi3516ev200 or hi3516ev300."
-    exit
-  fi
-
-  if [ $2 -eq 0 ]; then
-    echo "normal mode, ir_cut on"
-    ir_cut_enable >/dev/null
-  elif [ $2 -eq 1 ]; then
-    echo "ir mode, ir_cut off"
-    ir_cut_disable >/dev/null
-  else
-    echo "invalid mode, please slect 0 or 1."
-  fi
-fi

general/package/anyka-osdrv-ak3918ev200/files/script/load_anyka

@@ -1,196 +0,0 @@
-#!/bin/sh
-#
-# This is part of OpenIPC.org project | 2020.08.01
-#
-# ar0237 imx290 imx307 imx323 imx385 jxf22 ov2718 ov2718_2a sc2235
-
-
-# SoC detect
-chipid=$(ipcinfo --chip-name)
-
-# MMZ config
-mem_start=0x80000000;                             # phy mem start
-
-mem_total=$(fw_printenv -n totalmem | tr -d 'M')
-mem_total=${mem_total:=64}
-
-os_mem_size=$(fw_printenv -n osmem | tr -d 'M')
-os_mem_size=${os_mem_size:=32}
-
-report_error()
-{
-        echo "******* Error: There's something wrong, please check! *****"
-        exit 1
-}
-
-insert_mmz()
-{
-}
-
-insert_detect()
-{
-        insert_mmz
-        insert_isp
-        SENSOR=ar0130 insert_sns
-}
-
-remove_detect()
-{
-}
-
-remove_sns()
-{
-        rmmod -w sensor_spi &> /dev/null
-        rmmod -w sensor_i2c &> /dev/null
-}
-
-insert_isp()
-{
-}
-
-insert_sns()
-{
-}
-
-insert_ko()
-{
-	find . -maxdepth 1 -type f -name "sensor_*.ko" -exec insmod {} \;
-	insmod akcamera.ko
-}
-
-remove_ko()
-{
-}
-
-calc_mmz_info()
-{
-        mmz_start=`echo "$mem_start $os_mem_size" | 
-        awk 'BEGIN { temp = 0; }
-        {
-                temp = $1/1024/1024 + $2;
-        } 
-        END { printf("0x%x00000\n", temp); }'`
-
-        mmz_size=`echo "$mem_total $os_mem_size" | 
-        awk 'BEGIN { temp = 0; }
-        {
-                temp = $1 - $2;
-        } 
-        END { printf("%dM\n", temp); }'`
-        echo "mmz_start: $mmz_start, mmz_size: $mmz_size"
-}
-
-
-######################parse arg###################################
-b_arg_os_mem=0
-b_arg_total_mem=0
-b_arg_sensor=0
-b_arg_insmod=0
-b_arg_remove=0
-b_arg_online=1
-
-for arg in $@
-do
-        if [ $b_arg_total_mem -eq 1 ]; then
-                b_arg_total_mem=0;
-                mem_total=$arg;
-
-                if [ -z $mem_total ]; then
-                        echo "[error] mem_total is null"
-                        exit;
-                fi
-        fi
-
-        if [ $b_arg_os_mem -eq 1 ] ; then
-                b_arg_os_mem=0;
-                os_mem_size=$arg;
-
-                if [ -z $os_mem_size ]; then
-                        echo "[error] os_mem_size is null"
-                        exit;
-                fi
-        fi
-
-        if [ $b_arg_sensor -eq 1 ] ; then
-                b_arg_sensor=0
-                SENSOR=$arg;
-        fi
-
-        case $arg in
-                "-i")
-                        b_arg_insmod=1;
-                        ;;
-                "-r")
-                        b_arg_remove=1;
-                        ;;
-                "-a")
-                        b_arg_insmod=1;
-                        b_arg_remove=1;
-                        ;;
-                "-h")
-                        load_usage;
-                        ;;
-                "-sensor")
-                        b_arg_sensor=1;
-                        ;;
-                "-osmem")
-                        b_arg_os_mem=1;
-                        ;;
-                "-total")
-                        b_arg_total_mem=1;
-                        ;;
-                "-offline")
-                        b_arg_online=0;
-                        ;;
-        esac
-done
-#######################parse arg end########################
-
-if [ $os_mem_size -ge $mem_total ] ; then
-        echo "[err] os_mem[$os_mem_size], over total_mem[$mem_total]"
-        exit;
-fi
-
-calc_mmz_info;
-
-#######################Action###############################
-
-if [ $# -lt 1 ]; then
-    load_usage;
-    exit 0;
-fi
-
-# Sensor config
-# SENSOR=${SENSOR:=imx307}
-#
-
-if [ -n "$SENSOR" ]; then
-        logger -s -p daemon.info -t anyka "Manualy set SENSOR as ${SENSOR}"
-else
-        if fw_printenv -n sensor >/dev/null; then
-                SENSOR_ENV=$(fw_printenv -n sensor)
-                export SENSOR=${SENSOR_ENV}
-                logger -s -p daemon.info -t anyka "Get data from environment and set SENSOR as ${SENSOR}"
-        else
-                #insert_detect
-                SENSOR_DETECT=$(ipcinfo --short-sensor)
-                export SENSOR=${SENSOR_DETECT:=unknown}
-                #remove_detect
-                logger -s -p daemon.info -t anyka "Get data from ipcinfo and set SENSOR as ${SENSOR}"
-                fw_setenv sensor $SENSOR && logger -s -p daemon.info -t anyka "Write detected ${SENSOR} to U-Boot ENV"
-        fi
-fi
-
-if [ $b_arg_remove -eq 1 ]; then
-        remove_ko;
-fi
-
-cd /lib/modules/3.4.35/anyka
-
-if [ "$SENSOR" = "unknown" ]; then
-        exit 1
-else
-        if [ $b_arg_insmod -eq 1 ]; then
-                insert_ko;
-        fi
-fi