# OpenIPC Wiki [Table of Content](../README.md) Foscam X5 / Acculenz R5 / Assark X3E --- #### Caution Make sure you have a device with label stating [FCC ID: ZDER3Version 1.0]. There are now devices on the market still marked as Foscam X5, which probably have different internals and do not support following flashing procedure/image. You will end up with bricked device! The label on those newer models contain designation like: [Device Name: MPS50501 FCC ID: ZDEX5 Version 6.0][3] #### Preparation Format an sdcard to FAT32 and copy the content of the following archive to the card: - [foscam-openipc.zip][1] Update your wireless credentials on autostart.sh: ```diff #!/bin/sh +WLAN_SSID="Router" +WLAN_PASS="12345678" ``` #### Flashing - Make sure the camera is powered off, put the prepared sdcard into the device. - Power the device on and wait at least 4 minutes. - Shortly after an OpenIPC camera should appear on your wlan. --- ### GPIO IRLed | IRCut | Speaker | Reset | IRSensor -|-|-|-|- GPIO0 | GPIO3 | GPIO14 | GPIO66 | GPIO80 ``` cli -s .nightMode.irSensorPin 80 cli -s .nightMode.irCutPin1 3 cli -s .nightMode.irCutSingleInvert true cli -s .nightMode.backlightPin 0 cli -s .audio.speakerPin 14 cli -s .audio.speakerPinInvert true ``` --- ### Wireless ``` fw_setenv wlandev rtl8188fu-ssc337de-foscam fw_setenv wlanssid Router fw_setenv wlanpass 12345678 ``` --- ### Camera disassembly
Expand pictures
--- ### Other - Labels: X3/R3/R5/X3E - https://fccid.io/ZDER3 [1]: https://github.com/openipc/wiki/files/13301107/foscam-openipc.zip [2]: https://fccid.io/ZDER3/Label/Label-Location-5529099 [3]: https://fccid.io/ZDEX5/Label/Label-Info-7719960