## For Anjoy/Brovotech/Gospell/Uniview boards ONLY with SoC SSC335 !!! ### Initial device firmware update ``` # setenv bootargs 'mem=${osmem:-32M} console=ttyS0,115200 panic=20 root=/dev/mtdblock3 rootfstype=squashfs init=/init LX_MEM=0x3fe0000 mma_heap=mma_heap_name0,miu=0,sz=0x1C00000 mma_memblock_remove=1 mtdparts=NOR_FLASH:256k(boot),64k(tech),2048k(kernel),5120k(rootfs),-(rootfs_data)' setenv bootcmd 'setenv setargs setenv bootargs ${bootargs}; run setargs; sf probe 0; sf read 0x21000000 0x50000 0x200000; bootm 0x21000000' setenv uk 'mw.b 0x21000000 ff 1000000; tftpboot 0x21000000 uImage.${soc}; sf probe 0; sf erase 0x50000 0x200000; sf write 0x21000000 0x50000 ${filesize}' setenv ur 'mw.b 0x21000000 ff 1000000; tftpboot 0x21000000 rootfs.squashfs.${soc}; sf probe 0; sf erase 0x250000 0x500000; sf write 0x21000000 0x250000 ${filesize}' saveenv setenv soc ssc335 <= Set you SoC - ssc325, ssc335, ssc337 setenv sensor none <= Set you sensor - gc2053, imx307, sc3335 setenv osmem 32M setenv totalmem 64M <= 64M for ssc335 setenv ipaddr 192.168.1.10 setenv serverip 192.168.1.254 <= Set you TFTP server IP saveenv run uk; run ur; reset <= Flash kernel, rootfs and reboot device ``` ### Follow-up quick updates ``` run uk; run ur; reset ``` ### Notes After the first flash firmware of the device, please run the **firstboot** command to format the jffs2 partition of the settings. ### Other info **Human-readable processor names for SigmaStar devices, the data is obtained on the original firmware** | Engraving |/sys/class/mstar/msys/CHIP_ID|/sys/devices/soc0/soc_id |/sys/devices/soc0/machine | |--- |--- |--- |--- | | SSC325DE | not found | 239 | INFINITY6 SSC009B-S01A QFN128 | | | | | | | SSC335 | 0xF2 | 242 | INFINITY6B0 SSC009A-S01A QFN88 | | SSC337 | 0xF2 | 242 | INFINITY6B0 SSC009A-S01A QFN88 | | SSC337DE | 0xF2 | 242 | INFINITY6B0 SSC009B-S01A QFN128 |