diff --git a/en/u-boot-settings.md b/en/u-boot-settings.md
index 940618d..fd14fc5 100644
--- a/en/u-boot-settings.md
+++ b/en/u-boot-settings.md
@@ -5,7 +5,7 @@ U-Boot settings
 ---------------
 
 ### bootdelay
-To be continued...
+Use this to set the delay before we start the kernel, This is the time where you can get into the bootloader.
 
 ### bootnfs
 To be continued...
@@ -14,10 +14,10 @@ To be continued...
 Mandatory setting, available in all OpenIPC bootloaders
 
 ### gatewayip
-To be continued...
+This is the camera's gateway IP address, Mostly used for when you are flasing using TFTP in U-Boot.
 
 ### ipaddr
-To be continued...
+This is the camera's IP address, Mostly used for when you are flasing using TFTP in U-Boot.
 
 ### osmem
 Mandatory setting, available in all OpenIPC bootloaders
@@ -29,9 +29,9 @@ The type of sensor used on the device is set automatically in most cases
 Specify the full path to the archive with custom OpenIPC firmware in .tgz format
 
 ### wlandev
-To be continued...
+The Wi-Fi Driver to use for the Wi-Fi interface. ([Learn how to use it here](../en/wireless-settings.md))
 
 ### wlanmac
-To be continued...
+The MAC for the Wi-Fi Interface.
 
 
diff --git a/en/wireless-settings.md b/en/wireless-settings.md
index 489c169..7e4ebb2 100644
--- a/en/wireless-settings.md
+++ b/en/wireless-settings.md
@@ -14,13 +14,14 @@ Wireless settings
 	devmem 0x100C0080 32 0x530
 ```
 
+> [!IMPORTANT]  
+> Some drivers are not included in the premade OpenIPC firmware binaries, You may have to compile it yourself.
+
 - The variables [are listed here][1] and be can set with:
 ```shell
 fw_setenv wlandev mt7601u-hi3516ev300-camhi
 ```
 
----
-
 ### Enter wireless credentials
 
 - Credentials can be added with: