From b9b9f1bad6a49c0756f2355324f392cbfc33f7c0 Mon Sep 17 00:00:00 2001
From: Paul Philippov <themactep@gmail.com>
Date: Sat, 9 Jul 2022 10:45:40 -0400
Subject: [PATCH] more info on terminal mode for connection to uart

---
 en/installation.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/en/installation.md b/en/installation.md
index 139942c..e33b331 100644
--- a/en/installation.md
+++ b/en/installation.md
@@ -75,8 +75,8 @@ or whatnot.
 
 Connect `GND` pin on your camera to `GND` pad of the adapter, connect USB
 connector of the adapter to a USB port on your PC, start a terminal emulator
-application and connect to your adapter. Use connection speed of 115200 bps,
-no flow control, no parity bit.
+application and connect to your adapter. Set your terminal settings to 
+115200 bps baudrate, 8 bits, no parity, 1 stopbit, no flow control.
 
 Then, connect `RX` pin on the adapter to a possible `TX` contact of UART port
 on your camera. Power the camera with its standard power adapter. If you had a