From b829a412e3f98774a86e2d5808be51583ffe5611 Mon Sep 17 00:00:00 2001 From: CurryKitten Date: Sun, 31 Dec 2023 00:23:22 +0000 Subject: [PATCH] Update A step-by-step installation guide for an FPV setup - orig.md --- en/A step-by-step installation guide for an FPV setup - orig.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/en/A step-by-step installation guide for an FPV setup - orig.md b/en/A step-by-step installation guide for an FPV setup - orig.md index 0ee9cc0..96fc6fc 100644 --- a/en/A step-by-step installation guide for an FPV setup - orig.md +++ b/en/A step-by-step installation guide for an FPV setup - orig.md @@ -18,7 +18,7 @@ For this step-by-step guide, I'm using specific hardware, and although the proce As a refereence for my camera I ordered an SSC338 based board with a Sony IMX415 sensor. -![Camera](https://raw.githubusercontent.com/CurryKitten/wiki/master/images/sbs-Camera.jpg) +![Camera](../images/sbs-Camera.jpg) I ordered this with a 2.8mm lens (which seems a bit narrow for FPV, but it's the widest that was available) and with the 12V Lan cable. This cable is very important for flashing the camera. This camera was chosen as it could do a range of frame rates and resolutions, and also had a decent sensor. I bought this from AliExpress, the specific URL for the link is [here](https://www.aliexpress.com/item/1005004350557805.html)