diff --git a/en/device-lsc-smart-connect-video-doorbell-2021.md b/en/device-lsc-smart-connect-video-doorbell-2021.md
new file mode 100644
index 0000000..12f1f5d
--- /dev/null
+++ b/en/device-lsc-smart-connect-video-doorbell-2021.md
@@ -0,0 +1,146 @@
+# LSC Smart Connect Video Doorbell (2021 edition)
+
+![device_lsc_doorbell1](../images/device-lsc-smart-connect-doorbell1.jpg)
+
+![device_lsc_doorbell2](../images/device-lsc-smart-connect-doorbell2.jpg)
+
+![device_lsc_doorbell4](../images/device-lsc-smart-connect-doorbell4.jpg)
+
+The hardware and software setup is very identical to: [chacron ipcam](device-chacon-ipcam-ri01.md)
+
+## Hardware
+
+| System | Description                          |
+|--------|--------------------------------------|
+| SoC    | HI3518EV300                          |
+| Sensor | JXF23                                |
+| Flash  | 8Mb (XM25QH64A)                      |
+| WiFi   | RTL8188FU                            |
+
+### OpenIPC status
+
+| Component     | Status                                                   |
+|---------------|----------------------------------------------------------|
+| WiFi          | [Working]                                                |
+| Red/Blue LEDs | [Working](#leds)                                         |
+| IR LED        | Working                                                  |
+| IR Cut        | Working                                                  |
+
+
+### Serial connection
+
+![device_lsc_doorbell3](../images/device-lsc-smart-connect-doorbell3.jpg)
+
+### Wifi
+* RTL8188FU
+
+### Nor flash
+[XM25QH64A](https://datasheet.lcsc.com/lcsc/XMC-XM25QH64AHIG_C328461.pdf)
+- 8MB NOR Flash
+
+### GPIOs
+
+| nr        | Description   |
+|-----------|---------------|
+| 0x0f (15) | irCut_1       |
+| 0x0c (12) | irCut_2       |
+| 0x28 (40) | IR LED        |
+| 0x33 (51) | Red LED       |
+| 0x32 (50) | Blue LED      |
+| 0x0d (13) | wlan power    |
+| 0x0d (59) | Doorbell btn  |
+
+### [ipctool](https://github.com/OpenIPC/ipctool) output (8Mb flash):
+
+```
+---
+chip:
+  vendor: HiSilicon
+  model: 3518EV300
+  id: 022c40875e0038e9a770030ad8188d942567d818418e29e3
+board:
+  vendor: OpenIPC
+  version: 2.3.12.28
+  possible-IR-cut-GPIO: 12,15
+ethernet:
+  mac: ""
+  u-mdio-phyaddr: 1
+  phy-id: 0x00000000
+  d-mdio-phyaddr: 0
+rom:
+- type: nor
+  block: 64K
+  partitions:
+    - name: boot
+      size: 0x40000
+      sha1: e959aa47
+    - name: env
+      size: 0x10000
+      sha1: 0d98dab2
+      contains:
+        - name: uboot-env
+          offset: 0x0
+    - name: kernel
+      size: 0x200000
+      sha1: 4fbf4879
+    - name: rootfs
+      size: 0x500000
+      sha1: d90b9fb5
+    - name: rootfs_data
+      size: 0xb0000
+      path: /overlay,jffs2,rw
+  size: 8M
+  addr-mode: 3-byte
+ram:
+  total: 64M
+  media: 32M
+firmware:
+  kernel: "4.9.37 (Thu Dec 28 11:19:02 UTC 2023)"
+  toolchain: buildroot-gcc-12.3.0
+  sdk: "Hi3516EV200_MPP_V1.0.1.2 B030 Release (Oct 18 2019, 18:21:00)"
+sensors:
+- vendor: GalaxyCore
+  model: GC2053
+  control:
+    bus: 0
+    type: i2c
+    addr: 0x6e
+  data:
+    type: MIPI
+    input-data-type: DATA_TYPE_RAW_10BIT
+    lane-id:
+      - 0
+      - 1
+    image: 1920x1080
+  clock: 27MHz
+```
+
+## Flashing OpenIPC
+
+Flashed using a CH341A programmer
+
+### LEDs
+
+The camera has a dual color LED (red/blue) connected to GPIO's 50 and 51.
+To control those LEDs you can use the /sys api:
+```
+# make the GPIOs accessible
+echo 50 > /sys/class/gpio/export
+# and set direction (only need to do once)
+echo out > /sys/class/gpio50/direction
+echo out > /sys/class/gpio51/direction
+
+# turn on blue LED
+echo 1 > /sys/class/gpio50/value
+# turn off blue LED
+echo 0 > /sys/class/gpio50/value
+
+# turn on red LED
+echo 1 > /sys/class/gpio51/value
+# turn off red LED
+echo 0 > /sys/class/gpio51/value
+```
+
+## Sources:
+
+* https://github.com/OpenIPC/wiki/blob/master/en/device-chacon-ipcam-ri01.md
diff --git a/images/device-lsc-smart-connect-doorbell1.jpg b/images/device-lsc-smart-connect-doorbell1.jpg
new file mode 100644
index 0000000..36e951e
Binary files /dev/null and b/images/device-lsc-smart-connect-doorbell1.jpg differ
diff --git a/images/device-lsc-smart-connect-doorbell2.jpg b/images/device-lsc-smart-connect-doorbell2.jpg
new file mode 100644
index 0000000..3e68c49
Binary files /dev/null and b/images/device-lsc-smart-connect-doorbell2.jpg differ
diff --git a/images/device-lsc-smart-connect-doorbell3.jpg b/images/device-lsc-smart-connect-doorbell3.jpg
new file mode 100644
index 0000000..0d24d9f
Binary files /dev/null and b/images/device-lsc-smart-connect-doorbell3.jpg differ
diff --git a/images/device-lsc-smart-connect-doorbell4.jpg b/images/device-lsc-smart-connect-doorbell4.jpg
new file mode 100644
index 0000000..c7f5ec0
Binary files /dev/null and b/images/device-lsc-smart-connect-doorbell4.jpg differ