From 9f6d536ac204303b8f37685a369430eb069e8a93 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonas=20K=C3=B6ritz?= Date: Wed, 10 Apr 2024 13:07:43 +0200 Subject: [PATCH] Added current requirement --- en/fpv-openipc-aio.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/en/fpv-openipc-aio.md b/en/fpv-openipc-aio.md index 3c5bc13..f42e9eb 100644 --- a/en/fpv-openipc-aio.md +++ b/en/fpv-openipc-aio.md @@ -18,6 +18,8 @@ The package comes with a heatsink and thermal pad. The thermal pad is covered in ### Power +The board needs a steady power supply of at least **3A at 5V DC**. This figure will be higher if higher RF power levels are selected. + Before powering on AIO board, the power pad must be soldered or connected to a reliable 5V power source or BEC. When there is not enough load capacitance on the BEC, it is recommended to add a 470uF electrolytic capacitor (included in the set) between the BEC and AIO board to protect the AIO board from surge damage and provide decoupling. Install the capacitor as close to the AIO-PCB as possible. ### Debug/Ethernet