From 89c5f67ff322d8c7047f715f0f563b3080b2d86a Mon Sep 17 00:00:00 2001 From: sansarus <sansarspv@gmail.com> Date: Wed, 16 Oct 2024 10:31:10 +0300 Subject: [PATCH] Create AHD2NET_converter.md AHD2NET_converter pinout at short manual --- en/AHD2NET_converter.md | 168 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 168 insertions(+) create mode 100644 en/AHD2NET_converter.md diff --git a/en/AHD2NET_converter.md b/en/AHD2NET_converter.md new file mode 100644 index 0000000..428239a --- /dev/null +++ b/en/AHD2NET_converter.md @@ -0,0 +1,168 @@ +## AHD 2 NET converter + + + + + +## Hardware + +GK7205V200 + +TP9950 + +8Mb flash + +| Name | pins |Description| GPIO | Usage | +| --- | --- | --- |---|---| +|**tp**||| gpio15 |ipctool gpio mux 15 gpio +|**led**|20|led| gpio69 |ipctool gpio mux 69 gpio +|**button**|70|pwm 0| | +|| + +### [ipctool](https://github.com/OpenIPC/ipctool) output (8Mb flash): + +``` +--- +chip: + vendor: Goke + model: 7205V200 + id: 22619808020855e3 +board: + vendor: OpenIPC + version: 2.4.10.14 +ethernet: + mac: "00:b9:47:77:a7:ac" + u-mdio-phyaddr: 1 + phy-id: 0x20669906 + d-mdio-phyaddr: 0 +rom: +- type: nor + block: 64K + partitions: + - name: boot + size: 0x40000 + sha1: 784cff96 + - name: env + size: 0x10000 + sha1: c39eab8e + contains: + - name: uboot-env + offset: 0x0 + - name: kernel + size: 0x200000 + sha1: 7cddc566 + - name: rootfs + size: 0x500000 + sha1: d716df93 + - name: rootfs_data + size: 0xb0000 + path: /overlay,jffs2,rw + size: 8M + addr-mode: 3-byte +ram: + total: 64M + media: 32M +firmware: + kernel: "4.9.37 (Mon Oct 14 22:46:14 UTC 2024)" + toolchain: buildroot-gcc-13.2.0 +``` + + + + + +## Flashing OpenIPC + +Flashed using a tftpboot +stop stock uboot by ENTER key + +setenv serverip 192.168.1.209 + +setenv ipaddr 192.168.1.203 + + tftpboot 0x40800000 192.168.1.209:openipc-gk7205v200-lite-8mb.bin + +sf probe 0 + +sf erase 0x0 0x800000 + +sf write 0x40800000 0x0 0x800000 + + +//need set sensor as bt656 by hand + +setenv sensor bt656 + +saveenv + +reset + + +## Warning + +after first booting GPIO_3 with a button connected, muxed as PWM0, pressing the button may damage the port ! + + +### [ipctool](https://github.com/OpenIPC/ipctool) pinmux + +``` + +./ipctool reginfo +muxctrl_reg0 0x100c0000 0x1 GPIO0_1 [UART0_RXD] +muxctrl_reg1 0x100c0004 0x1 GPIO0_2 [UART0_TXD] +muxctrl_reg2 0x100c0008 0 [GPIO0_0] UPDATE_MODE +muxctrl_reg3 0x100c000c 0 [GPIO0_3] PWM0 UART1_TXD I2C1_SCL +muxctrl_reg4 0x100c0010 0 [GPIO0_4] PWM1 UART1_RXD I2C1_SDA +muxctrl_reg5 0x100c0014 0x1 EMMC_CLK [SFC_CLK] SFC_DEVICE_MODE +muxctrl_reg6 0x100c0018 0x1 EMMC_CMD [SFC_MOSI_IO0] +muxctrl_reg7 0x100c001c 0x1 EMMC_DATA0 [SFC_MISO_IO1] +muxctrl_reg8 0x100c0020 0x1 EMMC_DATA3 [SFC_WP_IO2] +muxctrl_reg9 0x100c0024 0x1 EMMC_DATA2 [SFC_HOLD_IO3] +muxctrl_reg10 0x100c0028 0x1 EMMC_DATA1 [SFC_CSN] +muxctrl_reg11 0x100c002c 0 [SYS_RSTN_OUT] +muxctrl_reg12 0x100c0040 0x1 GPIO4_0 [SDIO0_CCLK_OUT] JTAG_TCK EMMC_CLK SDIO1_CCLK_OUT reserved VO_BT1120_DATA10 SFC_INPUT_SEL +muxctrl_reg13 0x100c0044 0x1 GPIO4_1 [SDIO0_CCMD] reserved EMMC_CMD SDIO1_CCMD reserved VO_BT1120_DATA11 +muxctrl_reg14 0x100c0048 0x1 GPIO4_2 [SDIO0_CDATA0] JTAG_TMS EMMC_DATA1 SDIO1_CDATA3 reserved VO_BT1120_DATA12 +muxctrl_reg15 0x100c004c 0x1 GPIO4_3 [SDIO0_CDATA1] JTAG_TDO EMMC_DATA2 SDIO1_CDATA2 reserved VO_BT1120_DATA13 +muxctrl_reg16 0x100c0050 0x1 GPIO4_4 [SDIO0_CDATA2] JTAG_TDI EMMC_DATA3 SDIO1_CDATA1 reserved VO_BT1120_DATA14 +muxctrl_reg17 0x100c0054 0x1 GPIO4_5 [SDIO0_CDATA3] JTAG_TRSTN EMMC_DATA0 SDIO1_CDATA0 reserved VO_BT1120_DATA15 +muxctrl_reg18 0x100c005c 0x1 GPIO4_7 [SDIO0_CARD_DETECT] reserved EMMC_RST_N +muxctrl_reg19 0x112c0000 0x2 MIPI_RX_CK0N reserved [VI_CLK] +muxctrl_reg20 0x112c0004 0x2 MIPI_RX_CK0P reserved [VI_DATA7] +muxctrl_reg21 0x112c0008 0x2 MIPI_RX_D0N reserved [VI_DATA8] +muxctrl_reg22 0x112c000c 0x2 MIPI_RX_D0P reserved [VI_DATA9] +muxctrl_reg23 0x112c0010 0x2 MIPI_RX_D2N reserved [VI_DATA11] +muxctrl_reg24 0x112c0014 0x2 MIPI_RX_D2P reserved [VI_DATA10] +muxctrl_reg25 0x112c0028 0x2 TEST_CLK SENSOR_CLK [VI_DATA6] reserved GPIO5_4 +muxctrl_reg26 0x112c002c 0x2 GPIO5_5 SENSOR_RSTN [VI_DATA4] +muxctrl_reg27 0x112c0030 0x2 GPIO5_6 I2C0_SDA [VI_DATA3] +muxctrl_reg28 0x112c0034 0x2 GPIO5_7 I2C0_SCL [VI_DATA5] +muxctrl_reg29 0x112c0038 0x2 GPIO6_2 I2C2_SDA [VI_DATA2] reserved reserved reserved reserved SPI0_SDO +muxctrl_reg30 0x112c003c 0x2 GPIO6_3 I2C2_SCL [VI_DATA1] reserved reserved reserved reserved SPI0_SCLK +muxctrl_reg31 0x112c0040 0x2 GPIO5_0 ETH_LINK_STA_LED [VI_DATA0] reserved reserved reserved reserved SPI0_CSN +muxctrl_reg32 0x112c0044 0x1 GPIO5_1 [ETH_LINK_ACT_LED] TEST_MODE +muxctrl_reg33 0x112c0048 0 [GPIO8_7] BOOT_SEL1 SENSOR_RSTN VO_BT656_CLK SDIO1_CCLK_OUT LCD_CLK VO_BT1120_CLK SPI1_SCLK +muxctrl_reg34 0x112c004c 0 [GPIO8_5] reserved VI_HS VO_BT656_DATA0 SDIO1_CCMD LCD_HS VO_BT1120_DATA8 SPI1_SDI +muxctrl_reg35 0x112c0050 0 [GPIO8_6] reserved VI_VS VO_BT656_DATA1 reserved LCD_VS VO_BT1120_DATA9 SPI1_SDO +muxctrl_reg36 0x112c0054 0x2 GPIO8_4 BOOT_SEL0 [SENSOR_CLK] PWM2 reserved LCD_DE reserved SPI1_CSN0 +muxctrl_reg37 0x112c0058 0 [GPIO7_0] reserved I2C2_SCL VO_BT656_DATA4 SDIO1_CDATA3 LCD_DATA4 VO_BT1120_DATA4 SPI1_CSN1 +muxctrl_reg38 0x112c005c 0 [GPIO7_1] reserved I2C2_SDA VO_BT656_DATA5 SDIO1_CDATA2 LCD_DATA5 VO_BT1120_DATA5 +muxctrl_reg39 0x112c0060 0x2 GPIO7_2 reserved [I2C0_SDA] VO_BT656_DATA6 SDIO1_CDATA1 LCD_DATA6 VO_BT1120_DATA6 +muxctrl_reg40 0x112c0064 0x2 GPIO7_3 reserved [I2C0_SCL] VO_BT656_DATA7 SDIO1_CDATA0 LCD_DATA7 VO_BT1120_DATA7 +muxctrl_reg41 0x112c0068 0 [GPIO6_7] reserved reserved VO_BT656_DATA3 reserved LCD_DATA3 VO_BT1120_DATA3 SPI0_CSN +muxctrl_reg42 0x112c006c 0 [GPIO6_6] SFC_BOOT_MODE PWM3 VO_BT656_DATA2 reserved LCD_DATA2 VO_BT1120_DATA2 SPI0_SDO +muxctrl_reg43 0x112c0070 0 [GPIO6_5] reserved UART1_RXD reserved reserved LCD_DATA1 VO_BT1120_DATA1 SPI0_SDI +muxctrl_reg44 0x112c0074 0 [GPIO6_4] reserved UART1_TXD reserved reserved LCD_DATA0 VO_BT1120_DATA0 SPI0_SCLK +muxctrl_reg45 0x120c0000 0x1 GPIO1_0 [LSADC_CH0] +muxctrl_reg46 0x120c0004 0 [GPIO1_1] LSADC_CH1 +muxctrl_reg47 0x120c0010 0 [JTAG_TRSTN] SPI1_CSN0 GPIO1_4 reserved UART2_RXD I2S_MCLK +muxctrl_reg48 0x120c0014 0 [JTAG_TCK] SPI1_SCLK GPIO1_5 reserved UART2_TXD I2S_BCLK +muxctrl_reg49 0x120c0018 0 [JTAG_TMS] SPI1_SDI GPIO1_6 PWM2 UART2_CTSN I2S_WS +muxctrl_reg50 0x120c001c 0 [JTAG_TDO] SPI1_SDO GPIO1_7 reserved UART2_RTSN I2S_SD_RX +muxctrl_reg51 0x120c0020 0x3 JTAG_TDI SPI1_CSN1 GPIO2_0 [SDIO0_CARD_POWER_EN] PWM3 I2S_SD_TX +``` + + + + +