From ea9cb0737418ab387d48619afa3b599a88207e6d Mon Sep 17 00:00:00 2001 From: Kenny <148837522+KennyPlus@users.noreply.github.com> Date: Sun, 22 Sep 2024 13:39:48 +0800 Subject: [PATCH] Update fpv-openipc-aio-mario.md add connect to internet operations and lower power input --- en/fpv-openipc-aio-mario.md | 55 +++++++++++++++++++++++++++++++++++-- 1 file changed, 53 insertions(+), 2 deletions(-) diff --git a/en/fpv-openipc-aio-mario.md b/en/fpv-openipc-aio-mario.md index a96c2b5..bd42f60 100644 --- a/en/fpv-openipc-aio-mario.md +++ b/en/fpv-openipc-aio-mario.md @@ -57,6 +57,16 @@ MSIC BEC on board is up to 2A 5V output enter uboot use uart device connect to top of AIO board(R0,T0)pad. +How to get lower voltage input for DC input + +AIO power supply from 2s-3S battery needed more current and required 4wires connected, but higher voltage 4S+ may works 2wire connection. + +Remove two resistors then you can get input as low as 5.4V input available. + +![image](https://github.com/user-attachments/assets/24218925-fca8-47e2-bc4a-1326dabeaa68) + + + ### Connect usb debug port @@ -64,6 +74,16 @@ Plug USB cable to connect AIO and PC first, then power on DC, or usb power only. If there are unknown USB devices in the computer, the following [corechip-sr9900](https://github.com/user-attachments/files/16829005/corechip-sr9900-usb20-to-fast-ethernet-adapter-1750095.zip) drivers need to be installed. +Operations on Mac OS + +Screenshot 2024-09-21 at 10 07 24 AM + +Screenshot 2024-09-21 at 10 09 18 AM + +Screenshot 2024-09-21 at 10 11 31 AM + + + #### Autosetup in windows Please download [Auto_Set_Mario_CDC.zip](https://github.com/user-attachments/files/17010487/Auto_Set_Mario_CDC.zip) file, unzip it and run as administrator. @@ -77,11 +97,40 @@ set this card ipv4 address to 192.168.1.11 mask:255.255.255.0 apply - then open ssh to connect AIO address:192.168.1.10 user:root password:12345 +**How to get internet for AIO** + +1.Open network connections on you windows, right click your main network adapter properties---Sharing: Allow other network users choose USB CDC + + +![image](https://github.com/user-attachments/assets/e3f41122-7601-4dff-b599-a325e0693b8c) + +Apply,then the CDC ethernet will got a ip address 192.168.137.1 automaticlly + + +![image](https://github.com/user-attachments/assets/bac7350b-399e-419c-8a4a-557d4378cf79) + +open admin terminal + +![image](https://github.com/user-attachments/assets/7eaae7ca-16c6-4e59-a8de-9178c9e3b77c) + +using arp -a to find AIO's IP + +![image](https://github.com/user-attachments/assets/f6d2641e-a5e9-45cd-90cb-5328d423a6c7) + +here 192.168.137.147 is my AIO's ip address. + +open ssh connect to AIO,Done. + +![5ed177f3dc690f9e70452e3e4c93b17](https://github.com/user-attachments/assets/48f44a3d-ae04-4780-aac7-b878a043c3e6) + +Now you can use sysupgrade -r -k -n --force_ver to update your firmware. + + + ### Upgrade firmware @@ -133,8 +182,10 @@ on bench test or debug is disable the record function defaultly To enable the recording function set (record value)true in majestic.yaml +SD card must insert before Powering. -On board heat sink and cooling fan: + +**On board heat sink and cooling fan:** cooling fan out put power up to 500mA max