From 8071039b17987c3346ee5502d211d7edd1f37996 Mon Sep 17 00:00:00 2001
From: viktorxda <35473052+viktorxda@users.noreply.github.com>
Date: Wed, 10 Apr 2024 13:35:34 +0200
Subject: [PATCH] Update fpv-openipc-aio.md
---
en/fpv-openipc-aio.md | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/en/fpv-openipc-aio.md b/en/fpv-openipc-aio.md
index 47152dc..999f714 100644
--- a/en/fpv-openipc-aio.md
+++ b/en/fpv-openipc-aio.md
@@ -10,10 +10,11 @@ OpenIPC AIO "UltraSight"
## How to mount the heatsink
-The package comes with a heatsink and thermal pad. The thermal pad is covered in 3M double sided tape on both sides. Two screws are included with the set that can be used to mount the heatsink. The heatsinks purpose is to dissipate heat from the WiFi components on the PCB. The thermal pad and heatsink therefore need to be placed on the side that has the WiFi components on it (e.g. antenna connectors, WiFi chip and power amplifiers).
+- The package comes with a heatsink and thermal pad. The thermal pad is covered in 3M double sided tape on both sides. Two screws are included with the set that can be used to mount the heatsink.
+- The heatsinks purpose is to dissipate heat from the WiFi components on the PCB. The thermal pad and heatsink therefore need to be placed on the side that has the WiFi components on it (e.g. antenna connectors, WiFi chip and power amplifiers).
## Board overview
-
+
### Power
- The board needs a steady power supply of at least **3A at 5V DC**. This figure will be higher if higher RF power levels are selected.