From 8001827b81ed234fb67b6686e8ba9e7e779723ed Mon Sep 17 00:00:00 2001
From: Benoit Duffez <b.duffez@kerlink.com>
Date: Fri, 25 Aug 2023 14:31:37 -0700
Subject: [PATCH] add LifeSmart LS179 installation instructions

---
 en/install-lifesmart.md | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 en/install-lifesmart.md

diff --git a/en/install-lifesmart.md b/en/install-lifesmart.md
new file mode 100644
index 0000000..390b372
--- /dev/null
+++ b/en/install-lifesmart.md
@@ -0,0 +1,39 @@
+# OpenIPC Wiki
+[Table of Content](../README.md)
+
+For LifeSmart cameras: LS179
+
+## BOM
+
+SoC: HI3518EV200  
+Flash: ENQH127A (16MB NOR)  
+Sensor: soif23 (???)
+
+## Installation
+
+Follow the [instructions](help-uboot.md#bypassing-password-protected-bootloader) to get access to U-boot.
+
+Back up the flash and install OpenIPC according to the [instructions](https://openipc.org/cameras/vendors/hisilicon/socs/hi3518ev200).
+
+## WiFi
+
+In order to connect to WiFi, you need to configure the [wireless device](wireless-settings.md#initial-configuration) with:
+
+```
+rtl8188fu-hi3518ev200-lifesmart
+```
+
+This will power up the USB device (WiFi card) and load the appropriate Kernel driver.
+
+## LEDs
+
+The LEDs are controlled by the GPO #2.
+
+```bash
+# turn on
+gpio set 2
+
+# turn off
+gpio clear 2
+```
+