From 749fd2ce8d98b56bea1695dcc8b73bec639b4b51 Mon Sep 17 00:00:00 2001 From: wkumik Date: Mon, 30 Sep 2024 18:01:11 +0200 Subject: [PATCH] Update fpv-runcam-wifilink-openipc.md --- en/fpv-runcam-wifilink-openipc.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/en/fpv-runcam-wifilink-openipc.md b/en/fpv-runcam-wifilink-openipc.md index bb76b5f..0f1bef3 100644 --- a/en/fpv-runcam-wifilink-openipc.md +++ b/en/fpv-runcam-wifilink-openipc.md @@ -48,8 +48,8 @@ When you first power up your runcam, the device will create a ‘user’ file a OpenIPC cnfigurator is a useful tool to change many different settings on your a camera that runs OpenIPC firmware. -Download and install the latest version of Putty -Download the OpenIPC configurator and install it +Download and install the latest version of Putty https://www.chiark.greenend.org.uk/~sgtatham/putty/ +Download the OpenIPC configurator https://github.com/OpenIPC/configurator/releases and install it Setting up IP -Connect your runcam to your computer’s Ethernet port with the Ethernet cable provided by Runcam - Open up a windows file browser, scroll down on the left bar and left click on Network, select properties. @@ -58,11 +58,11 @@ Setting up IP - Enter numbers as per image below On the configurator, enter IP address: 192.168.1.10 and press connect -Refer to this Readme for setting up OSD +Refer to this Readme https://github.com/OpenIPC/configurator/blob/master/README-manual.md for setting up OSD Set up all the settings. There are too many to go through them all here. ### 5. Android Ground station -Download Pixel Pilot Apk file from github, straight into your phone. +Download Pixel Pilot Apk file https://github.com/OpenIPC/PixelPilot/releases from github, straight into your phone. Go into Android file browser, find that file and install it. Open the Pixel Pilot app, and tap at the gear icon in top left corner Set up: Channel: 161