diff --git a/en/faq.md b/en/faq.md
index d261433..7fa689d 100644
--- a/en/faq.md
+++ b/en/faq.md
@@ -271,7 +271,73 @@ In this case, add `-O` option to the command:
 ```bash
 scp -O ~/myfile root@192.168.1.65:/tmp/
 ```
+### Configuring WireGuard to work with OpenIPC (VPN implementation)
 
+#### Configuring the server in Linux
+
+Use [this guide](https://ruvds.com/ru/helpcenter/nastroyka-vpn-s-ispolzovaniem-wireguard/) ([archived copy](https://web.archive.org/web/20240804111853/https://ruvds.com/ru/helpcenter/nastroyka-vpn-s-ispolzovaniem-wireguard/)).
+
+#### Configuring the client in OpenIPC
+
+1) In the `/etc/network/interfaces.d/wg0` file, add the `auto wg0` line to the beginning, in `address` specify the desired client address within the VPN network, and in `netmask` specify the VPN network mask. An example of the resulting file:
+```shell
+auto wg0
+iface wg0 inet static
+    address 10.10.10.10.2
+    netmask 255.255.255.255.0
+    pre-up modprobe wireguard
+    pre-up ip link add dev wg0 type wireguard
+    pre-up wg setconf wg0 /etc/wireguard.conf
+    post-down ip link del dev wg0
+```
+2) Edit the `/etc/wireguard.conf` file, taking into account that the `Address` (we set the address in the previous step) and `DNS` keywords are not supported. An example of the resulting file:
+```
+[Interface].
+PrivateKey = MO3+yxTyFnnOgeOk9NKFSKHqgFfW6cBhctUO4YeiwV0=
+[Peer]
+AllowedIPs = 10.10.10.10.0/24
+Endpoint = 192.168.0.2:51820
+PersistentKeepalive = 25
+PublicKey = M2/axcXbD+eg/c4vfEQTiIpV6LU+kzgJCGqDpzIpHS4=
+```
+
+3) In the `/etc/rc.local` file, add the `ifup wg0` line before the `exit 0` line. An example of the resulting file:
+
+```shell
+#!/bin/sh
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+ifup wg0
+exit 0
+```
+
+4) Reboot OpenIPC.
+
+5) Test: on the server and on the client, run the `wg show` command. Here is its output example if successful:
+
+```
+root@openipc-t31:~# wg show
+interface: wg0
+  public key: /RL2MdZqOdLsT2Be1KXnJWQGJP2oP8sVMlZ/f3GK1BA=
+  private key: (hidden)
+  listening port: 34161
+peer: M2/axcXbD+eg/c4vfEQTiIpV6LU+kzgJCGqDpzIpHS4=
+  endpoint: 192.168.0.2:51820
+  allowed ips: 10.10.10.0/24
+  latest handshake: 1 minute, 7 seconds ago
+  transfer: 185.22 KiB received, 182.02 KiB sent
+  persistent keepalive: every 25 seconds
+```
 
 [1]: https://openipc.org/wiki/en/gpio-settings.html
 [2]: https://github.com/OpenIPC/ipctool/releases/download/latest/ipctool