OpenIPC
/
wiki
mirror of https://github.com/OpenIPC/wiki.git
1
0
Fork 0
Code Activity

Merge pull request #1 from OpenIPC/master 

Update
pull/162/head
Lucas Della Santina 2023-09-21 19:31:45 -03:00 committed by GitHub
parent 0fb3a76935 291ca632ac
commit 718ee75867
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 44 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
en/faq.md
View File

@ -50,11 +50,11 @@ sf probe 0; sf erase 0xd50000 0x2b0000; reset
`ssh root@<camera_ip_address>`
There is no password by default.
There is _12345_ password by default.
### How to sign in into camera Web UI?
Open http://<camera_ip_address>:85/ and sign in using default username _admin_
Open http://<camera_ip_address>:85/ and sign in using default username _root_
and default password _12345_. You will be asked to change the password after
successful login.
@ -98,6 +98,45 @@ on the camera afterwards.
If you need to know what is in the command, search for `ipctool` in the
`/etc/profile` file.
### How to replace the bootloader from Linux? A dangerous operation for dummies!
Commands are executed separately by each line with a wait for the end of execution.
The full name of the replacement bootloader and its availability can be checked [here][3]
Before running the commands, don't forget to enter the correct bootloader name!
```
export LOADER=u-boot-SOC-TYPE.bin
curl -k -L -o /tmp/${LOADER} https://github.com/OpenIPC/firmware/releases/download/latest/${LOADER}
flashcp -v /tmp/${LOADER} /dev/mtd0
flash_eraseall /dev/mtd1
```
### How to update the ancient as shit OpenIPC firmware?
Commands are executed separately by each line with a wait for the end of execution.
The first command updates a utility whose algorithm was changed in February 2023.
If you need to update the utility on T31 processors, please add the -mips suffix to the URL of the downloaded utility.
The second command updates the firmware components themselves.
```
curl -L -o /tmp/ipcinfo https://github.com/OpenIPC/ipctool/releases/download/latest/ipcinfo && chmod +x /tmp/ipcinfo; /tmp/ipcinfo -csF
curl -s https://raw.githubusercontent.com/OpenIPC/firmware/master/general/overlay/usr/sbin/sysupgrade | sh -s -- -k -r -n
```
### Is it possible to switch from “lite” to “ultimate” via “Over the Air”?
It depends on the board, generally you can try to split the ultimate image to the rootfs and overlay partition and then set the correct partition layout via uboot.
A 'blind' uboot setup is only supported on sigmastar.
Otherwise the only way to get it working without accessing uboot is to manually set the correct variables with fw_printenv and fw_setenv.
```
dd if=rootfs.squashfs of=mtd3.bin bs=1k count=5120
dd if=rootfs.squashfs of=mtd4.bin bs=1k skip=5120
flashcp mtd3.bin /dev/mtd3 -v
flashcp mtd4.bin /dev/mtd4 -v
```
### How to dump full firmware to an NFS share
This could work if you are lucky, you gained access into Linux shell on stock
@ -227,3 +266,4 @@ scp -O ~/myfile root@192.168.1.65:/tmp/
[1]: https://openipc.org/wiki/en/gpio-settings.html
[2]: https://github.com/OpenIPC/ipctool/releases/download/latest/ipctool
[3]: https://github.com/OpenIPC/firmware/releases/tag/latest

2
en/guide-supported-devices.md
View File

@ -56,6 +56,8 @@ _If you have another supported device to add, please do it [here][2]._
| iFlytek | XFP301-M | T31ZX | JXQ03 | XM25QH128C | No | RTL8188FU | No | Yes |
| Qihoo 360 | AP6PCM03 | T31ZX | GC4653 | EN25QH256A | Yes | ATBM6031 | No | Yes |
| Goke | [MJ-C232V5-0SW1][5]| GK7205V200 | GC2305 | XM25QH128CHIQ| Yes | RTL8188FU | No | No |
| Uniview | CMCC-IPC-A35 | Hi3516EV300 | SP2305 | W25N01GV | Yes | | No | No |
| E-Life | EF3113 | T31L | GC2053 | ZB25VQ128 | Yes | SV6155P | No | Yes |
| Processor | Sensor | Vendor | SKU | Board identification |