diff --git a/en/sdcardautoconfig.md b/en/sdcardautoconfig.md
new file mode 100644
index 0000000..a98b2d0
--- /dev/null
+++ b/en/sdcardautoconfig.md
@@ -0,0 +1,88 @@
+# OpenIPC Wiki
+[Table of Content](../index.md)
+
+SD Card Autoconfig
+------------------
+
+OpenIPC can be configured automatically from an SD card. This method is particularly useful for WiFi-only
+IP cameras equipped with and SD card slot and where UART is not acessible.
+
+### Format an SD card with at least one FAT/FAT32/vFAT partition.
+
+Attention! All existing data on the SD card will be deleted!
+
+On Windows:
+```
+diskpart
+
+list disk
+select disk <number corresponding to your SD card>
+clean
+create partition primary
+format quick fs=FAT32
+list partition
+active
+assign letter=<letter>
+```
+
+### Create `automount.sh` file in the root directory of the card.
+
+```
+echo "#!/bin/sh" > <sdcard-path>/automount.sh
+```
+
+### Add files to inject into firmware.
+
+Create a folder named `autoconfig` at the root of your SD card and place there files that should
+be copied inside OpenIPC firmware with their paths following this pattern:
+`<sdcard-path>/autoconfig/<target-path>/file` => `/<target-path>/file`.
+
+E.g. `<sdcard-path>/autoconfig/etc/init.d/interfaces` will be copied to `/etc/init.d/interfaces`.
+
+Add this code to `automount.sh` to handle the copying:
+```
+if [ -d "${destdir}/$1/autoconfig" ]; then
+  cp -afv ${destdir}/$1/autoconfig/* / | logger -s -p daemon.info -t autoconfig
+fi
+```
+
+### Add a one-time configuration script.
+
+Create `autoconfig.sh` file at the root of the SD card. This script will be run once, then removed.
+
+Add this code to `automount.sh` to handle the one-time execution:
+```
+if [ -f "${destdir}/$1/autoconfig.sh" ]; then
+  (sh ${destdir}/$1/autoconfig.sh; rm -f ${destdir}/$1/autoconfig.sh) | logger -s -p daemon.info -t autoconfig
+fi
+```
+
+### Add a permanent script to run on every start
+
+Create `autostart.sh` file at the root of the SD card. This script will run on every start.
+
+Add this code to `automount.sh` to hande the execution on every start:
+```
+if [ -f "${destdir}/$1/autostart.sh" ]; then
+  sh ${destdir}/$1/autostart.sh | logger -s -p daemon.info -t autostart
+fi
+```
+
+Your resulting `automount.sh` file should look like this:
+```
+#!/bin/sh
+
+if [ -d "${destdir}/$1/autoconfig" ]; then
+  cp -afv ${destdir}/$1/autoconfig/* / | logger -s -p daemon.info -t autoconfig
+fi
+
+if [ -f "${destdir}/$1/autoconfig.sh" ]; then
+  (sh ${destdir}/$1/autoconfig.sh; rm -f ${destdir}/$1/autoconfig.sh) | logger -s -p daemon.info -t autoconfig
+fi
+
+if [ -f "${destdir}/$1/autostart.sh" ]; then
+  sh ${destdir}/$1/autostart.sh | logger -s -p daemon.info -t autostart
+fi
+```
+
+Unmount the card, eject if from PC and insert it into the IPC camera. Reboot the camera.