mirror of https://github.com/OpenIPC/wiki.git
Create old-notes-for-resorting.md
parent
9da17f977d
commit
2c66c0f154
|
@ -0,0 +1,74 @@
|
|||
## Installation: how to make OpenIPC running on certain HW
|
||||
|
||||
Supported HW and installation procedures are given on [openipc.org](https://openipc.org/firmware/) site.
|
||||
|
||||
Please follow on site instructions for your CPU and video chip!
|
||||
|
||||
Here are some examples:
|
||||
|
||||
[Hi3516cv300 with IMX291](https://openwrt.org/docs/techref/hardware/soc/soc.hisilicon.hi35xx/ivg-hp203y-ay)
|
||||
|
||||
[[Hi3516Ev300-IMX335]]
|
||||
|
||||
## How to upgrade OpenIPC
|
||||
|
||||
Currently full automatic system upgrade like [sysupgrade](https://github.com/openwrt/openwrt/blob/master/package/base-files/files/sbin/sysupgrade) in OpenWRT is not supported. Use partial manual update instead.
|
||||
|
||||
### Partial manual update
|
||||
|
||||
**NB!** _Partial upgrade of U-boot and kernel are recommended only in special cases and should be done with caution._
|
||||
|
||||
The process is described on the main site on [firmware page](https://openipc.org/firmware/#update-parts-of-the-firmware).
|
||||
|
||||
## Frequently Asked Questions
|
||||
|
||||
* Can OpenIPC be installed on Raspberry Pi or other hardware?
|
||||
|
||||
No. Currently only HiSilicon HI35xx SoC are supported. But theoretically it is possible to support other architectures and boards. Though it will require a lot of efforts and thus it is not a near time focus of the project.
|
||||
|
||||
* Can I flash OpenIPC image without using UART console and TFTP?
|
||||
|
||||
No. Currently it is not possible, though we are working on this.
|
||||
|
||||
* What the difference between OpenIPC based on BuildRoot and based on OpenWRT?
|
||||
|
||||
Buildroot is faster for initial development for new platforms as it is minimalistic and has no dependencies. OpenWRT is convenient for users as a final product, but there are a lot of complexities, dependencies, and there is no point in developing without a community.
|
||||
|
||||
### Other FAQs
|
||||
|
||||
* https://github.com/OpenIPC/camerasrnd/blob/master/doc/FAQ-ru.md
|
||||
|
||||
|
||||
## Network related stuff
|
||||
|
||||
Common network configuration can be done in Luci GUI:
|
||||
|
||||
`http://<your camera IP>`
|
||||
|
||||
[[3G_modems]] USB modems support in hilink and ppp modes
|
||||
|
||||
## Graphical User Interfaces
|
||||
|
||||
There are two branches of OpenIPC currently:
|
||||
|
||||
### OpenWRT based
|
||||
|
||||
GUI is based on Luci. There are menu sections for camera specific setup.
|
||||
|
||||
### Buildroot based
|
||||
|
||||
Tere is a different interface planned... Still under development.
|
||||
|
||||
## Hardware related recommendations
|
||||
|
||||
### Power Over Internet PoE
|
||||
|
||||
It is advised to use 48V power adapters with RJ-45 connectors instead of 12V. With 12V adapters the current will be 4 times higher. High current can burn RJ-45 connectors and wires.
|
||||
|
||||
## How to stream video to Internet
|
||||
|
||||
* [[MiniHttp]] ➤ main audio/video streamer of the OpenIPC based system
|
||||
|
||||
* [[Мajestic]] ➤ new (in development) audio/video streamer of the OpenIPC based system
|
||||
|
||||
* [[YouTube Sreaming]]
|
Loading…
Reference in New Issue