From 28061a8367a542bd49102509020850ade7630d69 Mon Sep 17 00:00:00 2001 From: Felipe Santos Date: Thu, 15 Dec 2022 11:58:34 -0300 Subject: [PATCH] Add PuTTY screenshots to connection As asked by Paul in Telegram. --- en/installation.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/en/installation.md b/en/installation.md index dba5e92..55afd08 100644 --- a/en/installation.md +++ b/en/installation.md @@ -119,7 +119,10 @@ or whatnot. Connect `GND` pin on your camera to `GND` pad of the adapter, connect USB connector of the adapter to a USB port on your PC, start a terminal emulator application and connect to your adapter. Set your terminal settings to -115200 bps baudrate, 8 bits, no parity, 1 stopbit, no flow control. +115200 bps baudrate, 8 bits, no parity, 1 stopbit, no flow control. If you use [PuTTY](https://www.putty.org/), this is how it should look like: + +![PuTTY connection screen](https://user-images.githubusercontent.com/29582865/207893170-d4db4ba4-752e-48d4-bb7a-8bc4227e0b32.png) +![PuTTY settings screen](https://user-images.githubusercontent.com/29582865/207893175-83e74d3f-e563-4e9c-94df-d58645cfe2ad.png) Then, connect `RX` pin on the adapter to a possible `TX` contact of UART port on your camera. Power the camera with its standard power adapter. If you had a