From 0d084483618430e7f3b3c3ba2418998a2e23db86 Mon Sep 17 00:00:00 2001 From: gtxaspec Date: Tue, 16 Jan 2024 05:46:46 -0800 Subject: [PATCH] Update ingenic-cloner-guide.md --- en/ingenic-cloner-guide.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/en/ingenic-cloner-guide.md b/en/ingenic-cloner-guide.md index c77dc10..0c120f2 100644 --- a/en/ingenic-cloner-guide.md +++ b/en/ingenic-cloner-guide.md @@ -72,7 +72,7 @@ by the embossed or drawn dot next to it. 9. **Device Recognition Procedure**: - Plug the USB cable into the device, leaving the other end unplugged. - - Short pins 5-6 as described earlier in this document. + - Short pins 5-6 ON THE FLASH CHIP, not SoC or any other chip, use the photos as a reference, as described earlier in this document. - While maintaining the short, connect the USB cable to the computer. Wait 2 seconds, then release the short. - It may take up to 30 seconds for Cloner to recognize the device. Progress bars on the main screen will indicate ongoing operations.