diff --git a/en/network-settings.md b/en/network-settings.md
index 9a4f647..7602ef6 100644
--- a/en/network-settings.md
+++ b/en/network-settings.md
@@ -5,59 +5,6 @@ A collection of practical networking settings
 ---------------------------------------------
 
 
-### /etc/network/netadapter
-
-Example how to convert wlan0 interface settings to the new wifi configuration script:
-
-```diff
-auto wlan0
-iface wlan0 inet dhcp
-+   pre-up devmem 0x100C0080 32 0x530
-+   pre-up echo 7 > /sys/class/gpio/export
-+   pre-up echo out > /sys/class/gpio/gpio7/direction
-+   pre-up echo 0 > /sys/class/gpio/gpio7/value
-+   pre-up modprobe mt7601u
-    pre-up wpa_passphrase "SSID" "password" >/tmp/wpa_supplicant.conf
-    pre-up sed -i '2i \\tscan_ssid=1' /tmp/wpa_supplicant.conf
-    pre-up sleep 3
-    pre-up wpa_supplicant -B -D nl80211 -i wlan0 -c/tmp/wpa_supplicant.conf
-    post-down killall -q wpa_supplicant
-!   post-down echo 1 > /sys/class/gpio/gpio7/value
-!   post-down echo 7 > /sys/class/gpio/unexport
-```
-```diff
-# HI3516EV300 CamHi
-if lsusb | grep -q 7601; then
-	if [ $1 = "startup" ]; then
-+		devmem 0x100C0080 32 0x530
-+		echo 7 > /sys/class/gpio/export
-+		echo out > /sys/class/gpio/gpio7/direction
-+		echo 0 > /sys/class/gpio/gpio7/value
-+		modprobe mt7601u
-	elif [ $1 = "shutdown" ]; then
-!		echo 1 > /sys/class/gpio/gpio7/value
-!		echo 7 > /sys/class/gpio/unexport
-	fi
-	exit 0
-fi
-```
-
-
-### Wireless credentials
-
-For the initial setup, the device will create an access point with the name OpenIPC and password 12345678.
-
-The accesspoint will be automatically closed after 5 minutes to prevent misuse.
-
-After connecting to the device, credentials can be changed with a builtin script:
-
-```
-wireless setup [SSID] [PASS]
-wireless connect
-wireless show
-```
-
-
 ### ETH0 | DHCP for all platforms
 
 ```
diff --git a/en/wireless-settings.md b/en/wireless-settings.md
new file mode 100644
index 0000000..23ef057
--- /dev/null
+++ b/en/wireless-settings.md
@@ -0,0 +1,88 @@
+# OpenIPC Wiki
+[Table of Content](../index.md)
+
+Wireless settings
+---
+
+### Additional packages
+
+- Following packages are needed for the HI3516EV300 CamHi module.
+- The build configuration is: `hi3516ev300_ultimate_defconfig`
+
+```
+BR2_PACKAGE_WIRELESS_CONFIGURATION=y
+BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
+```
+
+---
+
+### Initial configuration
+
+- The wireless settings are provided based on the used build defconfig:
+
+```diff
+# HI3516EV300 CamHi
++if [ "$CONFIG" = "hi3516ev300_ultimate_defconfig" ]; then
+	if [ "$1" = "start" ]; then
+		devmem 0x100C0080 32 0x530
+```
+
+---
+
+### Adopt custom settings
+
+- The adapter configuration is located at: `/wireless-configuration/files/script/adapter`
+- It is possible to convert existing wlan0 settings to the new wireless configuration:
+
+```diff
+auto wlan0
+iface wlan0 inet dhcp
++	pre-up devmem 0x100C0080 32 0x530
++	pre-up echo 7 > /sys/class/gpio/export
++	pre-up echo out > /sys/class/gpio/gpio7/direction
++	pre-up echo 0 > /sys/class/gpio/gpio7/value
++	pre-up modprobe mt7601u
+	pre-up wpa_passphrase "SSID" "password" >/tmp/wpa_supplicant.conf
+	pre-up sed -i '2i \\tscan_ssid=1' /tmp/wpa_supplicant.conf
+	pre-up sleep 3
+	pre-up wpa_supplicant -B -D nl80211 -i wlan0 -c/tmp/wpa_supplicant.conf
+	post-down killall -q wpa_supplicant
+!	post-down echo 1 > /sys/class/gpio/gpio7/value
+!	post-down echo 7 > /sys/class/gpio/unexport
+```
+
+```diff
+# HI3516EV300 CamHi
+if [ "$CONFIG" = "hi3516ev300_ultimate_defconfig" ]; then
+	if [ "$1" = "start" ]; then
++		devmem 0x100C0080 32 0x530
++		echo 7 > /sys/class/gpio/export
++		echo out > /sys/class/gpio/gpio7/direction
++		echo 0 > /sys/class/gpio/gpio7/value
++		sleep 1
++		modprobe mt7601u
+	elif [ "$1" = "stop" ]; then
+!		echo 1 > /sys/class/gpio/gpio7/value
+!		echo 7 > /sys/class/gpio/unexport
+	fi
+fi
+```
+
+---
+
+### Enter wireless credentials
+
+- For the initial setup, the device will create an access point with the name OpenIPC and password 12345678.
+- After connecting to the device, credentials can be changed with the wireless script:
+
+```
+wireless setup [SSID] [PASS]
+```
+
+- Additional settings are:
+
+```
+wireless connect
+wireless reset
+wireless show
+```