firmware/general/package/wifibroadcast-ng/files/wifibroadcast

#!/bin/sh
wfb_key=/etc/drone.key
wfb_cfg=/etc/wfb.yaml
wfb_dev=wlan0

echo_log() {
	echo "$1" | logger -s -t wifibroadcast
}

wfb_yaml() {
	if [ -e "$1" ]; then
		while IFS=: read -r key value; do
			key=$(eval echo "$key")
			value=$(eval echo "$value")
			export "$key=$value"
		done < "$1"
	fi
}

load_config() {
	wfb_yaml /rom"$wfb_cfg"
	wfb_yaml "$wfb_cfg"
	[ ! -e "$wfb_key" ] && wfb_key=/rom"$wfb_key"
}

load_modules() {
	for card in $(lsusb | awk '{print $6}' | uniq); do
		case "$card" in
			"0bda:8812" | "0bda:881a" | "0b05:17d2" | "2357:0101" | "2604:0012")
				driver=88XXau
				;;

			"0bda:a81a")
				driver=8812eu
				;;

			"0bda:f72b" | "0bda:b733")
				driver=8733bu
				;;
		esac
	done

	if [ -z "$driver" ]; then
		echo_log "Wireless module not detected!"
		exit 1
	fi

	echo_log "Detected driver: $driver"
	[ -e /sys/class/net/"$wfb_dev" ] && return
	sleep 1

	if [ "$driver" != "88XXau" ]; then
		opt1="rtw_tx_pwr_by_rate=0"
		opt2="rtw_tx_pwr_lmt_enable=0"
	fi

	modprobe "$driver" "$opt1" "$opt2"
	sleep 3

	if ! ifconfig "$wfb_dev" up; then
		echo_log "Wireless driver not found!"
		exit 1
	fi
}

load_mlink() {
	ifconfig "$wfb_dev" mtu "$mlink"

	nalu=$((mlink - 100))
	if [ "$(cli -g .outgoing.naluSize)" != "$nalu" ]; then
		cli -s .outgoing.naluSize "$nalu"
		killall -1 majestic
	fi
}

load_interface() {
	iw "$wfb_dev" set monitor none

	[ "$width" = "40" ] && wfb_width=HT40+ || wfb_width=HT20
	iw "$wfb_dev" set channel "$channel" "$wfb_width"
	iw reg set 00

	[ "$driver" = "88XXau" ] && wfb_power=$((txpower * -100)) || wfb_power=$((txpower * 50))
	iw "$wfb_dev" set txpower fixed "$wfb_power"
}

load_wfb() {
	wfb_rx -K "$wfb_key" -i "$link_id" -p "$1" -u "$3" "$wfb_dev" &> /dev/null &
	wfb_tx -K "$wfb_key" -M "$tun_index" -B "$width" -k "$fec_k" -n "$fec_n" \
		-S "$stbc" -L "$ldpc" -i "$link_id" -p "$2" -u "$4" "$wfb_dev" &> /dev/null &
}

start_broadcast() {
	echo_log "Starting wfb_tx"
	wfb_tx -K "$wfb_key" -M "$mcs_index" -B "$width" -k "$fec_k" -n "$fec_n" -U rtp_local \
		-S "$stbc" -L "$ldpc" -i "$link_id" -C 8000 "$wfb_dev" &> /dev/null &
}

start_tunnel() {
	echo_log "Starting wfb_tun"
	load_wfb 160 32 5800 5801
	wfb_tun -a 10.5.0.10/24 > /dev/null &
}

start_telemetry() {
	chipset=$(ipcinfo -c)
	[ "$chipset" = "ssc33x" ] && devmem 0x1F207890 16 0x8

	port_rx=14550
	port_tx=14551

	echo_log "Starting $router"
	load_wfb 144 16 "$port_rx" "$port_tx"

	if [ "$router" = "mavfwd" ]; then
		mavfwd -b 115200 -c 8 -p 100 -a 15 -t -m /dev/"$serial" \
			-o 127.0.0.1:"$port_tx" -i 127.0.0.1:"$port_rx" > /dev/null &
	else
		if [ "$router" = "msposd" ]; then
			size=$(curl -s localhost/api/v1/config.json | jsonfilter -qe "@.video0.size")
		fi
		msposd -b 115200 -c 8 -r "$osd_fps" -m /dev/"$serial" \
			-o 127.0.0.1:"$port_tx" -z "$size" > /dev/null &
	fi
}

video_settings() {
	sensor=$(ipcinfo -s)
	cli -s .isp.sensorConfig /etc/sensors/"$sensor"_fpv.bin
	cli -s .isp.exposure 5
	cli -s .video0.fps 60
	cli -s .video0.bitrate 8192
	cli -s .video0.codec h265
	cli -s .video0.rcMode cbr
	cli -s .outgoing.enabled true
	cli -s .outgoing.wfb true
	cli -s .fpv.enabled true
	cli -s .fpv.noiseLevel 1
}

start() {
	load_config
	load_modules
	load_mlink
	load_interface

	if [ ! -e /etc/system.ok ]; then
		video_settings
		touch /etc/system.ok
		killall -1 majestic
	fi

	stop
	start_broadcast
	start_tunnel
	start_telemetry
}

stop() {
	for process in wfb_rx wfb_tx wfb_tun msposd mavfwd; do
		if [ -n "$(pidof $process)" ]; then
			echo_log "Stopping $process"
			killall -q "$process"
		fi
	done
}

case "$1" in
	start|stop)
		$1
		;;

	reset)
		cp -f /rom"$wfb_cfg" "$wfb_cfg"
		cp -f /rom/etc/majestic.yaml /etc/majestic.yaml
		video_settings
		;;

	cli)
		shift
		yaml-cli -i "$wfb_cfg" "$@"
		;;

	*)
		echo "Usage: $0 {start|stop|reset|cli}"
		exit 1
		;;
esac