mirror of https://github.com/OpenIPC/firmware.git
39 lines
2.0 KiB
Diff
39 lines
2.0 KiB
Diff
diff -drupN a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
|
|
--- a/drivers/input/misc/Makefile 2018-08-06 17:23:04.000000000 +0300
|
|
+++ b/drivers/input/misc/Makefile 2022-06-12 05:28:14.000000000 +0300
|
|
@@ -7,6 +7,7 @@
|
|
obj-$(CONFIG_INPUT_88PM860X_ONKEY) += 88pm860x_onkey.o
|
|
obj-$(CONFIG_INPUT_88PM80X_ONKEY) += 88pm80x_onkey.o
|
|
obj-$(CONFIG_INPUT_AB8500_PONKEY) += ab8500-ponkey.o
|
|
+obj-$(CONFIG_INPUT_LTR553ALS) += ltr_553als.o
|
|
obj-$(CONFIG_INPUT_AD714X) += ad714x.o
|
|
obj-$(CONFIG_INPUT_AD714X_I2C) += ad714x-i2c.o
|
|
obj-$(CONFIG_INPUT_AD714X_SPI) += ad714x-spi.o
|
|
@@ -36,10 +37,12 @@ obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00
|
|
obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
|
|
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
|
|
obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
|
|
+obj-$(CONFIG_INPUT_GPIO) += gpio_event.o gpio_matrix.o gpio_input.o gpio_output.o gpio_axis.o
|
|
obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
|
|
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
|
|
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
|
|
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
|
|
+obj-$(CONFIG_INPUT_KEYCHORD) += keychord.o
|
|
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
|
|
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
|
|
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
|
|
@@ -63,6 +66,7 @@ obj-$(CONFIG_INPUT_RB532_BUTTON) += rb53
|
|
obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
|
|
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
|
|
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
|
|
+obj-$(CONFIG_INPUT_AXP2101_PEK) += axp2101-pek.o
|
|
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
|
|
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
|
|
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
|
|
@@ -78,3 +82,5 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x
|
|
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
|
|
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
|
|
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
|
|
+obj-$(CONFIG_STK3X1X) += stk3x1x.o
|
|
+obj-$(CONFIG_HALL_OCH175) += hall_och175.o
|