firmware/br-ext-chip-ingenic/board/t40/kernel/patches/00000-drivers_lzma_lzma.c.p...

143 lines
4.2 KiB
Diff

diff -drupN a/drivers/lzma/lzma.c b/drivers/lzma/lzma.c
--- a/drivers/lzma/lzma.c 1970-01-01 03:00:00.000000000 +0300
+++ b/drivers/lzma/lzma.c 2022-06-09 05:02:29.000000000 +0300
@@ -0,0 +1,138 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <soc/base.h>
+#include <linux/string.h>
+
+//#include <asm/arch/clk.h>
+#include <../drivers/media/platform/ingenic-jpeg/jpeg-regs.h>
+
+#define LZMA_CTRL 0x00
+#define LZMA_BS_BASE 0x04
+#define LZMA_BS_SIZE 0x08
+#define LZMA_DST_BASE 0x0C
+#define LZMA_ICRC 0x10
+#define LZMA_OCRC 0x14
+#define LZMA_TIMEOUT 0x18
+#define LZMA_FINAL 0x1c
+
+#define CPM_BASE_M (char *)0xb0000000
+#define CPM_CLKGR0 0x20
+#define CPM_BSCCDR 0xa0
+
+#define LZMA_BASE (char *)0xb3090000
+#define BSCALER_BASE (char *)0xb3090000
+#define REG32(x) *(volatile unsigned int *)(x)
+
+void dump_lzma_reg(void)
+{
+ printk("\nDUMP CPM LZMA REG : \n");
+ printk("CPM_BSCCDR = 0x%x \n", readl( CPM_BASE_M + CPM_BSCCDR));
+ printk("CPM_CLKGR0 = 0x%x \n", readl( CPM_BASE_M + CPM_CLKGR0));
+
+ printk("DUMP LZMA REG : \n");
+ printk("LZMA_CTRL = 0x%x \n", readl( LZMA_BASE+ LZMA_CTRL));
+ printk("LZMA_BS_BASE = 0x%x \n", readl(LZMA_BASE + LZMA_BS_BASE));
+ printk("LZMA_BS_SIZE = 0x%x \n", readl(LZMA_BASE + LZMA_BS_SIZE));
+ printk("LZMA_DST_BASE = 0x%x \n", readl( LZMA_BASE + LZMA_DST_BASE));
+ printk("LZMA_FINAL = 0x%x \n", readl(LZMA_BASE + LZMA_FINAL));
+}
+
+int jz_lzma_decompress(unsigned char *src, size_t size, unsigned char *dst)
+{
+ unsigned int value = 0, outlen = 0;
+ unsigned int clk_val = 0, clk_gate = 0,ret = 0;
+ unsigned long out_file ,in_file;
+ unsigned int out_reg = 0,in_reg=0;
+
+ /* config clk */
+ clk_val = readl(CPM_BASE_M + CPM_BSCCDR);
+ clk_val |= ((2 << 30) | (1 << 29) | (1 <<0));
+ writel(clk_val, CPM_BASE_M + CPM_BSCCDR);
+
+ clk_gate = readl(CPM_BASE_M + CPM_CLKGR0);
+ clk_gate &= ~(1 << 2);
+ writel(clk_gate, CPM_BASE_M + CPM_CLKGR0);
+
+ /* start set lzma */
+
+ value = readl(BSCALER_BASE + LZMA_CTRL);
+ value |= 1<<2;
+ writel(1 << 2, BSCALER_BASE + LZMA_CTRL);
+ value = readl(BSCALER_BASE + LZMA_CTRL);
+ while(value & 0x04) {
+ value = readl(BSCALER_BASE + LZMA_CTRL);
+ }
+
+ /* set lzma mode */
+ value = readl(BSCALER_BASE + LZMA_CTRL);
+
+ while(!(value & (1 << 31))) {
+ value |= 1 << 31;
+ writel(value, BSCALER_BASE + LZMA_CTRL);
+ value = readl(BSCALER_BASE + LZMA_CTRL);
+ };
+
+ /* reset lzma */
+ writel(1 << 2, BSCALER_BASE + LZMA_CTRL);
+ while(readl(BSCALER_BASE + LZMA_CTRL) & (1 << 2));
+
+ /* init ram */
+ writel(1 << 1 ,BSCALER_BASE + LZMA_CTRL);
+ while(readl(BSCALER_BASE + LZMA_CTRL) & (1 << 1));
+
+ /* config */
+ in_file = __get_free_pages(GFP_KERNEL, 11);//10 == 1024 == 4M ,if page_size=4096bytes,11==8M
+ if (in_file <= 0){
+ printk("input file space request failed!\n");
+ ret = -ENOMEM;
+ return -1;
+ }
+ memset((void*)in_file, 0xff, 1024*1024*8);
+ out_file = __get_free_pages(GFP_KERNEL, 12); //10 == 1024 == 4M ,if page_size=4096bytes,12==16M
+ if (out_file <= 0){
+ printk("input file space request failed!\n");
+ ret = -ENOMEM;
+ return -1;
+ }
+ memset((void*)out_file, 0xff, 1024*1024*16);
+ memmove((void *)in_file,(void* )src,size);
+ in_reg = virt_to_phys((void *)in_file );
+ out_reg = virt_to_phys((void*)out_file);
+ mm_segment_t fs;
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ dma_cache_sync(NULL, (void *)in_file, 1*1024*1024, DMA_BIDIRECTIONAL);
+ memmove((void *)in_file,(void *)src,size);
+ dma_cache_sync(NULL, (void*)in_file, 1*1024*1024, DMA_BIDIRECTIONAL);
+ set_fs(fs);
+
+ writel(in_reg , BSCALER_BASE + LZMA_BS_BASE);
+ writel(size, BSCALER_BASE + LZMA_BS_SIZE);
+ writel(out_reg , BSCALER_BASE + LZMA_DST_BASE);
+
+ /* close intr and start lzma*/
+ writel((1 << 0) | (1 << 3), BSCALER_BASE + LZMA_CTRL);
+
+ /* wait end */
+ while(readl(BSCALER_BASE + LZMA_CTRL) & (1 << 0));
+ outlen = readl(BSCALER_BASE + LZMA_FINAL);
+
+ memmove((void *)dst,(void *)out_file,outlen);
+
+
+ free_pages(in_file, 11);;
+ free_pages(out_file, 12);
+ return outlen;
+}
+EXPORT_SYMBOL(jz_lzma_decompress);