name: openipc-ssc338q-fpv-image
on:
  schedule:
    - cron: '30 23 * * *' # 每天 UTC 时间 23:30 触发
  workflow_dispatch: # 支持手动触发

env:
  SIGMASTAR: ssc338q
  TAG_NAME: openipc-ssc338q-fpv-image

jobs:
  toolchain:
    name: Image
    runs-on: ubuntu-latest
    steps:
      - name: Prepare
        run: |
            link=https://github.com/longcat99/firmware/releases/download/openipc-ssc338q-fpv
            create() {
              uboot=u-boot-$1-nor.bin
              firmware=openipc.$2-nor-$3.tgz
              release=target/openipc-$1-nor-$3.bin

              mkdir -p output target
              # 下载 U-Boot 文件
              if ! wget -nv $link/$uboot -O output/$1.bin; then
                echo -e "Download failed: $link/$uboot\n"
                return 0
              fi
              
              # 下载固件文件
              if ! wget -nv $link/$firmware -O output/$2.tgz; then
                echo -e "Download failed: $link/$firmware\n"
                return 0
              fi

              # 解压固件
              tar -xf output/$2.tgz -C output

              # 初始化固件文件，填充为 16MB 的 0xFF
              dd if=/dev/zero bs=1K count=16384 status=none | tr '\000' '\377' > $release

              # 写入 U-Boot (256KB)
              dd if=output/$1.bin of=$release bs=1K seek=0 conv=notrunc status=none

              # 写入内核镜像 (3072KB，从 320KB 开始)
              dd if=output/uImage.$2 of=$release bs=1K seek=320 conv=notrunc status=none

              # 写入根文件系统 (9600KB，从 3392KB 开始)
              dd if=output/rootfs.squashfs.$2 of=$release bs=1K seek=3392 conv=notrunc status=none

              # 清理临时文件夹
              rm -rf output

              echo -e "Created: $release\n"
            }

            # 按 SOC 类型生成固件
            for soc in $SIGMASTAR ; do
              create $soc $soc fpv
            done

      - name: Upload
        uses: softprops/action-gh-release@v2
        with:
          tag_name: ${{ env.TAG_NAME }}
          make_latest: false
          files: target/*.bin