#!/bin/sh

soc=$(fw_printenv -n soc) || (>&2 echo "SOC not defined in U-Boot ENV"; exit 1)
vendor=$(fw_printenv -n vendor) || (>&2 echo "Vendor not defined in U-Boot ENV"; exit 1)
# devid=$(fw_printenv -n devid) || (>&2 echo "SOC not defined in U-Boot ENV"; exit 1)

case ${vendor} in
  anjoy)
    case ${soc} in
      ssc335|ssc337|ssc337de)
      gpio="ircut1=78 ircut2=79 light=61"
      ;;
    esac
    ;;
  camhi|xin)
    case ${soc} in
      hi3516ev200|gk7205v200)
        gpio="usb_ena=-9"
        ;;
      hi3516ev300|gk7205v300)
        gpio="ircut1=10 ircut2=11 usb_ena=-7"
        ;;
      hi3518ev200)
        gpio="ircut1=1 ircut2=2 light=48"
        ;;
    esac
    ;;
  herospeed|longsee|cantonk)
    case ${soc} in
      hi3516ev200|gk7205v200)
        gpio="ircut1=12 ircut2=13 irctl=4 alm_in=15 alm_out=14"
        ;;
      hi3518ev200)
        gpio="ircut1=64 ircut2=65"
        ;;
      hi3516av300)
        gpio="ircut1=5 ircut2=6"
        ;;
    esac
    ;;
  jabsco)
    case ${soc} in
      hi3516ev200|gk7205v200)
        gpio="ircut1=52 ircut2=53 irstatus=9"
        ;;
    esac
    ;;
  jvt)
    case ${soc} in
      hi3516cv200)
        gpio="ircut1=64 ircut2=65 light=62"
        ;;
      hi3518ev200)
        gpio="ircut1=64 ircut2=65 light=47"
        ;;
    esac
    ;;
  juan|sannce)
    case ${soc} in
      hi3518ev200)
        gpio="ircut1=65 ircut2=64 irstatus=-62"
        ;;
    esac
    ;;
  tiandy)
    case ${soc} in
      hi3518ev200)
        gpio="ircut1=78 ircut2=79 irctl=37"
        ;;
    esac
    ;;
  uniview)
    case ${soc} in
      hi3516ev300|gk7205v300)
        gpio="ircut1=63 ircut2=67 reset="
        ;;
    esac
    ;;
  xm)
    case ${soc} in
      hi3516ev200|gk7205v200)
        gpio="ircut1=8 ircut=29 irstatus=15 irctl=16 alm_in=4,53 alm_out=55 eth_act=14 eth_sta=12 reset=0"
        ;;
      hi3516ev300|gk7205v300)
        gpio="ircut1=10 ircut2=11 irstatus=66 irctl=52 alm_in=4,67 alm_out=65 eth_act=30 eth_sta=31 reset=0"
        ;;
      hi3516dv100)
        gpio="ircut1=14 ircut2=15"
        ;;
      hi3516cv300)
        gpio="ircut1=53 ircut2=54 irstatus=64 irctl=66 alm_in=55 alm_out=1 reset=2 usb_ena=63"
        ;;
      hi3518ev200)
        gpio="ircut1=33 ircut2=34 alm_in=61 alm_out=35"
        ;;
    esac
    ;;
  zenotech|videopark)
    case ${soc} in
      hi3516ev300|gk7205v300)
        gpio="ircut1=40 ircut2=41 irctl=65"
        ;;
    esac
    ;;
esac

echo ${gpio}