diff -drupN a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
--- a/drivers/devfreq/Kconfig	2018-08-06 17:23:04.000000000 +0300
+++ b/drivers/devfreq/Kconfig	2022-06-12 05:28:14.000000000 +0300
@@ -72,6 +72,25 @@ config DEVFREQ_GOV_PASSIVE
 	  through sysfs entries. The passive governor recommends that
 	  devfreq device uses the OPP table to get the frequency/voltage.
 
+config DEVFREQ_GOV_ADAPTIVE
+	depends on ARCH_SUN50I || ARCH_SUN8IW10 || ARCH_SUN8IW11
+	tristate "Adaptive"
+	help
+	  Sets the frequency according to dram master access or idle.
+
+config DEVFREQ_GOV_TEMPTRIGGER
+	depends on SUN50IW1P1_THERMAL
+	tristate "Temptrigger"
+	help
+	  Sets the frequency according to temperature control.
+
+config DEVFREQ_GOV_DSM
+	depends on EVB_PLATFORM
+	depends on ARCH_SUN9IW1P1 || ARCH_SUN8IW5P1 || ARCH_SUN8IW6P1 || ARCH_SUN8IW8P1 || ARCH_SUN8IW9P1
+	bool "Dsm"
+	help
+	  Sets the frequency according to dram scene management(DSM).
+
 comment "DEVFREQ Drivers"
 
 config ARM_EXYNOS_BUS_DEVFREQ
@@ -112,6 +131,80 @@ config ARM_RK3399_DMC_DEVFREQ
           It sets the frequency for the memory controller and reads the usage counts
           from hardware.
 
+config ARM_SUNXI_DRAM_DEVFREQ
+	bool "ARM Sunxi Dram DEVFREQ Driver"
+	select ARCH_HAS_OPP
+	select PM_OPP
+	depends on ARCH_SUN50I || ARCH_SUN8IW10 || ARCH_SUN8IW11
+	select DEVFREQ_GOV_ADAPTIVE
+	help
+	  DRAM Frequency scaling allows you to change the clock speed of
+	  DRAM on the fly. This is a nice method to save power, because
+	  the lower the DRAM clock speed, the less power the DRAM consumes.
+
+	  If in doubt, say N.
+
+config SUNXI_DRAM_SIMPLIFIED_DEVFREQ
+	bool "Sunxi Dram DEVFREQ Simplified Driver"
+	select ARCH_HAS_OPP
+	select PM_OPP
+	depends on !ARM_SUNXI_DRAM_DEVFREQ
+	help
+	  This is a new devfreq driver for sunxi soc. The difference from the original
+	  sunxi driver is that it removes some unnecessary function operations and
+	  old-style APIs, and no longer pays attention to the master's access and idle
+	  state interrupt. It aims to be used with strategies such as ondemand. According
+	  to the access of the dram master, the software adjusts the frequency as needs.
+
+	  If in doubt, say N.
+
+config DEVFREQ_DRAM_FREQ_CFS_SW
+	bool "Change dram frequency in CFS mode, need extra software operation"
+	depends on DEVFREQ_DRAM_FREQ
+	depends on ARCH_SUN8IW6P1
+	help
+	  This will need extra software operation after changing dram frequency in CFS mode.
+
+	  If in doubt, say N.
+
+config DEVFREQ_DRAM_FREQ_IN_VSYNC
+	bool "Change dram frequency in display vsync"
+	depends on ARM_SUNXI_DRAM_DEVFREQ
+	depends on ARCH_SUN50I || ARCH_SUN8IW10 || ARCH_SUN8IW11
+	depends on !EINK_PANEL_USED
+	help
+	  This will allow dram frequency changed in display vsync.
+
+	  If in doubt, say N.
+
+config DEVFREQ_DRAM_FREQ
+	bool "DRAM Frequency scaling"
+	depends on DEVFREQ_GOV_USERSPACE || DEVFREQ_GOV_VANS || DEVFREQ_GOV_DSM
+	depends on ARCH_SUN8IW6 || ARCH_SUN8IW5
+	help
+	  DRAM Frequency scaling allows you to change the clock speed of
+	  DRAM on the fly. This is a nice method to save power, because
+	  the lower the DRAM clock speed, the less power the DRAM consumes.
+
+	  If in doubt, say N.
+
+config DEVFREQ_DRAM_FREQ_BUSFREQ
+	bool "Change bus frequency with dram frequency changed when low-power music playing"
+	depends on ARM_SUNXI_DRAM_DEVFREQ  || DEVFREQ_DRAM_FREQ
+	depends on ARCH_SUN50I || ARCH_SUN8IW6 || ARCH_SUN8IW5P1
+	help
+	  This will allow bus frequency changed when low-power music playing.
+
+	  If in doubt, say N.
+
+config DEVFREQ_DRAM_FREQ_WITH_SOFT_NOTIFY
+	bool "Use dram master notify access or idle in software"
+	depends on ARM_SUNXI_DRAM_DEVFREQ
+	depends on ARCH_SUN50I
+	help
+	  This will allow dram master notify access or idle instead of hardware interrupt.
+
+	  If in doubt, say N.
 source "drivers/devfreq/event/Kconfig"
 
 endif # PM_DEVFREQ