# Untested sensor 2021.01.25

[sensor]
Sensor_type   =sc1035                   ;sensor name
Mode          =0                        ;WDR_MODE_NONE = 0
                                        ;WDR_MODE_BUILT_IN = 1
                                        ;WDR_MODE_2To1_LINE = 2
                                        ;WDR_MODE_2To1_FRAME = 3
                                        ;WDR_MODE_2To1_FRAME_FULL_RATE =4 ...etc
DllFile   =/usr/lib/sensors/libsns_sc1035_960p.so    ;sensor lib path


[mode]
input_mode =4                           ;INPUT_MODE_MIPI = 0
                                        ;INPUT_MODE_SUBLVDS = 1
                                        ;INPUT_MODE_LVDS = 2 ...etc

dev_attr = 2                         	;mipi_dev_attr_t = 0
                                        ;lvds_dev_attr_t = 1
                                        ;NULL =2

[isp_image]
Isp_x      =0
Isp_y      =0
Isp_W      =1280
Isp_H      =720
Isp_FrameRate=30
Isp_Bayer  =3   ;BAYER_RGGB=0, BAYER_GRBG=1, BAYER_GBRG=2, BAYER_BGGR=3


[vi_dev]
Input_mod =2    ;VI_INPUT_MODE_BT656 = 0
                ;VI_INPUT_MODE_BT601,
                ;VI_INPUT_MODE_DIGITAL_CAMERA
Work_mod =0     ;VI_WORK_MODE_1Multiplex = 0
                ;VI_WORK_MODE_2Multiplex,
                ;VI_WORK_MODE_4Multiplex
Combine_mode =0 ;Y/C composite or separation mode
                ;VI_COMBINE_COMPOSITE = 0 /*Composite mode */
                ;VI_COMBINE_SEPARATE,     /*Separate mode */
Comp_mode    =0 ;Component mode (single-component or dual-component)
                ;VI_COMP_MODE_SINGLE = 0, /*single component mode */
                ;VI_COMP_MODE_DOUBLE = 1, /*double component mode */
Clock_edge   =1 ;Clock edge mode (sampling on the rising or falling edge)
                ;VI_CLK_EDGE_SINGLE_UP=0, /*rising edge */
                ;VI_CLK_EDGE_SINGLE_DOWN, /*falling edge */
Mask_num     =2 ;Component mask
Mask_0       =0xFFF00000   ; Please also probe mask 0xFFF0000
Mask_1       =0x0
Scan_mode    =1 ;VI_SCAN_INTERLACED = 0
                ;VI_SCAN_PROGRESSIVE,
Data_seq     =2 ;data sequence (ONLY for YUV format)
                ;----2th component U/V sequence in bt1120
                ;    VI_INPUT_DATA_VUVU = 0,
                ;    VI_INPUT_DATA_UVUV,
                ;----input sequence for yuv
                ;    VI_INPUT_DATA_UYVY = 0,
                ;    VI_INPUT_DATA_VYUY,
                ;    VI_INPUT_DATA_YUYV,
                ;    VI_INPUT_DATA_YVYU

Vsync   =1     ; vertical synchronization signal
                ;VI_VSYNC_FIELD = 0,
                ;VI_VSYNC_PULSE,
VsyncNeg=0      ;Polarity of the vertical synchronization signal
                ;VI_VSYNC_NEG_HIGH = 0,
                ;VI_VSYNC_NEG_LOW /*if VIU_VSYNC_E
Hsync  =0       ;Attribute of the horizontal synchronization signal
                ;VI_HSYNC_VALID_SINGNAL = 0,
                ;VI_HSYNC_PULSE,
HsyncNeg =0     ;Polarity of the horizontal synchronization signal
                ;VI_HSYNC_NEG_HIGH = 0,
                ;VI_HSYNC_NEG_LOW
VsyncValid =0   ;Attribute of the valid vertical synchronization signal
                ;VI_VSYNC_NORM_PULSE = 0,
                ;VI_VSYNC_VALID_SINGAL,
VsyncValidNeg =0;Polarity of the valid vertical synchronization signal
                ;VI_VSYNC_VALID_NEG_HIGH = 0,
                ;VI_VSYNC_VALID_NEG_LOW
Timingblank_HsyncHfb =0     ;Horizontal front blanking width
Timingblank_HsyncAct =1280  ;Horizontal effetive width
Timingblank_HsyncHbb =0     ;Horizontal back blanking width
Timingblank_VsyncVfb =0     ;Vertical front blanking height
Timingblank_VsyncVact =960 ;Vertical effetive width
Timingblank_VsyncVbb=0      ;Vertical back blanking height
Timingblank_VsyncVbfb =0    ;Even-field vertical front blanking height(interlace, invalid progressive)
Timingblank_VsyncVbact=0    ;Even-field vertical effetive width(interlace, invalid progressive)
Timingblank_VsyncVbbb =0    ;Even-field vertical back blanking height(interlace, invalid progressive)

;----- only for bt656 ----------
FixCode   =0    ;BT656_FIXCODE_1 = 0,
                ;BT656_FIXCODE_0
FieldPolar=0    ;BT656_FIELD_POLAR_STD = 0
                ;BT656_FIELD_POLAR_NSTD
DataPath  =1    ;ISP enable or bypass
                ;VI_PATH_BYPASS    = 0,/* ISP bypass */
                ;VI_PATH_ISP       = 1,/* ISP enable */
                ;VI_PATH_RAW       = 2,/* Capture raw data, for debug */
InputDataType=1 ;VI_DATA_TYPE_YUV = 0,VI_DATA_TYPE_RGB = 1,
DataRev      =FALSE ;Data reverse. FALSE = 0; TRUE = 1
DevRect_x=0     ;
DevRect_y=0    ;
DevRect_w=1280  ;
DevRect_h=960  ;

[vi_chn]
CapRect_X    =0
CapRect_Y    =0
CapRect_Width=1280
CapRect_Height=960
DestSize_Width=1280
DestSize_Height=960
CapSel       =2 ;Frame/field select. ONLY used in interlaced mode
                ;VI_CAPSEL_TOP = 0,                  /* top field */
                ;VI_CAPSEL_BOTTOM,                   /* bottom field */
                ;VI_CAPSEL_BOTH,                     /* top and bottom field */

PixFormat    =19;PIXEL_FORMAT_YUV_SEMIPLANAR_422 = 22
                ;PIXEL_FORMAT_YUV_SEMIPLANAR_420 = 23 ...etc
CompressMode =0 ;COMPRESS_MODE_NONE = 0
                ;COMPRESS_MODE_SEG =1 ...etc

SrcFrameRate=-1 ;Source frame rate. -1: not controll
FrameRate   =-1 ;Target frame rate. -1: not controll